K24 CHEAP INTAKE MANIFOLD MODS HOW TO SAVE MONEY EASILY

Подписаться 40 тыс.

Просмотров 11 тыс.

50% 1

In this video I go through the necessary steps you should consider when buying eBay intake manifolds
-----------------------------------------------------------------------------------------------------------------------------------
WEBSITE LINK
5% off code:Tristan1
for US:
Hose Pipe：bit.ly/3lym1ra
Brace Bar：bit.ly/3CkLyKq
Intake Manifold：bit.ly/3xpAxnj
maxpeedingrods new version coilovers：bit.ly/3Ccs5dK
for AUSTRALIA:
new blue and black NEXT GEN coilovers：bit.ly/3wcRaDR
-USA
au.maxpeedingrods.com/?tracki...
BUYING FROM THIS WEBSITE HELPS ME AND THE CHANNEL GROW
----------------------------------------------------------------------------------------------------------------------
If you would like to support the channel I have started a PATREON account Link Below:
/ turbotristan
--------------------------------------------------------------------------------------------------------------------------------------
SUSCRIBE ► / @turbotristo
Check out the entire journey series ► • EK CIVIC - BUDGET EVOL...
----------------------------------------------------------------------------------------------------------------------------------------
New episodes every weekend as well as bonus footage of car meets, workshop tours & track days!
I'm based in Melbourne and have been into the car scene for 25
years now, I've seen drifting come and go I've seen Silvia's and skylines go from being worth $40k down to $4k and now back up to $80k for a Rough example, I sold new cars for Nissan for 14 years and its safe to say I have NISSAN BLOOD running through my veins yet here I am being unable to afford the cars I once had which has turned me to becoming a "HONDA BOI" I have to say they are great cars I love learning about them and lets face it value for money they are ridiculously fast!
Check below to see my car resume:
*1991 Nissan Pulsar N14 SSS- 118kW not raced
*1996 Nissan Silvia S14 200sx -220kW 13.0@109mph
*1990 Nissan Skyline R32 GTR- 350kW 12.0@118mph
*1996 Nissan Skyline R33 GTR- 520kW 11.0@127mph
*2015 Nissan Pulsar C12 SSS- 200kW 14.0@104mph
*1998 Honda Civic EK sedan 150kW-TBA stay tuned
*1987 Holden VL Commodore RB30ET Goal 300kW
*2000 Honda Civic Ek -Full Build Budget Street/Track Car
*Toyota SW20 MR2 2GR V6 swapped Street/ Track all rounder
*1990 BMW E30 318 M54b30 swap street car resto mod
Help me get to 50,000 subscribers please share my vids

Авто/Мото

Опубликовано:

31 янв 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 73

@Yamum691 2 года назад

If you use a bit of candle wax on that flap wheel it will polish that perfectly and won't clog the wheel, and you can buy a proper burr for aluminium, it will rip off way more. The carbide burr your using will still work they just gum up really quickly, smoosh on candle wax or use wd40 on the burr you have

@TURBOTRISTO 2 года назад

GREAT PRO TIP FROM THE MASTER THANKS AIDO

@or-ian6973 Год назад

@@TURBOTRISTO Can use acid to eat the aluminum off the burr. Works quick and easy. If you have more than one just keep rotating them.

@bongskag 2 года назад

My China skunked 2 was pretty bad on the port matching , it's like the casting sand or tooling went wrong 🤣👍 gotta port them to make it worthwhile. I'm sure it would make less power if it was just thrown onto a stock engine ! It's a DIY manifold to save money . I'm not scared of a bit of work 💪

@TURBOTRISTO 2 года назад

Me either man, the real skunks are the same who do you think makes them…

@user-hh4hc2lt6e 2 года назад

@@TURBOTRISTO i did all this and also cut off the water port, should i port the fuel injector hole like u did? I didn’t really touch it much other than gasket matching it perfectly. I’m not sure if it would be bad to take out more specifically on the injector area… you mention it at 7:04. If we could chat and i could send u pics/ videos of my current port job, it would be nice. I’m kinda worried since it’s a China2 😅😂

@carlosbezares4030 2 года назад

Great video! I bought the same one after I watched the video. I cut of the water section since I bought for my 02 RSX. I gasket matched the runners the same way I also did the throttle body side. I cut off the name plate part and all the extra chunks of meat. I got it nice and smooth painted it flat black. I also relocated the ABS hose to the underside of then manifold.

@TURBOTRISTO 2 года назад

Nice bro! I’m glad I inspired you

@user-hh4hc2lt6e 2 года назад

Pls i want to see the finished product, I’ve considered shaving down the name plate part

@ChatMotorsport 2 года назад

I found your channel by mistake a few weeks ago by mistake after searching info for my EP1 D14Z6, One day when my channel grows I'll have the funds to do some stuff with it!

@TURBOTRISTO 2 года назад

awesome man thank you if you haven't already please subscribe

@alextziolis7682 2 года назад

Looking good bro… some people have zero idea when it comes to generic vs name brand….. f@@k all difference when it comes to cast..

@TURBOTRISTO 2 года назад

Yup exactly

@Slot1Gamer 2 года назад

11:19 Captain planet has entered the chat

@TURBOTRISTO 2 года назад

I will be recycling the engine, gear box, subframe & running the car on recycled corn stalks and sugar cane , this will be better for the planet than a Tesla

@teamaxlestands 2 года назад

Belt sizes i cant give you the exact number but i can tell you with the EP3 Pulley you use a 7PK1320 without air con and a 7PK1640 with the pulley and air con. So 320mm difference. I'd just be chucking some string around it and checking. But my theory is if you take the stock CL9 one and minus 320mm it should be the size you want.

@teamaxlestands 2 года назад

oh you might want to also check you wont have bonnet clearance issues with power steering. I know the hasport has dual height mounts... but lower is wayyy too low in my opinion and upper has hood clearance issues on my EG.

@TURBOTRISTO 2 года назад

I have noticed that, i am not too worried about it I will cut it up if I need to

@itscompilated9266 2 года назад

looking good bro

@TURBOTRISTO 2 года назад

Thanks it’s complicated

@frostyflowers4207 2 года назад

The Ebay d16 china manifolds are really bad like cheese and gasket doesn't line up the k20 one you have looks good out the box was not far off

@TURBOTRISTO 2 года назад

It was ok no different to all the others , the last mxr d16 one I fitted was perfect

@jdmnuggets 2 года назад

Ohhh cheers 🍻🍻 from across the ditch 🇳🇿, hope you can make this a career 👍. Its tough work.

@TURBOTRISTO 2 года назад

Thanks bruuuu ❤️❤️

@TURBOTRISTO 2 года назад

Me too

@jdmnuggets 2 года назад

You use Instagram? Or best method to chat with you? Be good to bounce some kswap info

@TURBOTRISTO 2 года назад

@@jdmnuggets Facebook or email bro

@jonctr Год назад

Thanks for the info on these. Been looking at buying one for my EP3 CTR (K20A2), and ultimately for use for a future K24 swap for the EP3. I haven't bought one yet, as they don't seem to have the channel cut in the throttle body mounting plate that matches the one for the IACV on the K20 throttle body - do you have to delete the IACV?

@TURBOTRISTO Год назад

You don’t have to but I did

@jonctr Год назад

@@TURBOTRISTO I've just worked this out - if you use an manifold adapter plate for K20A throttle bodies (such as Tegiwa RRC or K-Tuned RBC/RRC etc), there is a built in air channel in the RRC/RBC adapter plate which allows the vacuum back in to the IACV port on the K20A throttle body :)

@jonctr Год назад

Also at 11:20 - that water jacket fitting is for the Idle Air Assist Valve (IAAV) which lets additional air bleed through to speed up cold starts etc (useful in UK where mines originally from, but not now in sunny WA). It used to always cause rev hunting on mine during warm up and quite a few other UKDM CTR's. When I cleaned out the IACV, I also put in the K-tuned IAAV delete kit which plugs this off. It now cold idles like a dream. That fitting is not integral to a K20A manifold, and is housed in a separate fitting on the K20, which can be removed and included in this K24 style manifold

@TURBOTRISTO Год назад

thanks heaps for the info man

@danielarnold7466 2 года назад

pretty good aye

@TURBOTRISTO 2 года назад

thanks mate, how have you been/ im in facebook jail sorry if you havent been able to get a hold of me

@danielarnold7466 2 года назад

@@TURBOTRISTO all good brother. We know how to find you if we need too

@stephanfouche5815 5 месяцев назад

Use some brake fluid on the carbite tips to keep it from clogging up. Try it and let me know what u think

@TURBOTRISTO 5 месяцев назад

Will do brother thanks for tip

@vtecchair 3 месяца назад

Hey how did the eBay manifold hold up?? Did u see any improvement/gains over stock? eBay’s flooded with with these k24 intake manifolds rn I’m thinking bout grabbing one🤙

@TURBOTRISTO 3 месяца назад

You lose power in an NA application with these but it’s not so crucial on a turbo application, it’s held up fine

@fulledbyarm 2 года назад

get a k20 box so you can get it going , you can use the cheap mounts

@TURBOTRISTO 2 года назад

I’m patient not in a rush I’ll do this one properley

@fulledbyarm 2 года назад

@@TURBOTRISTO you just said you can only afford a 180 dollar manifold

@TURBOTRISTO 2 года назад

@@fulledbyarm im allocating funds acording to priority and how much they matter, which is always my motto I dont believe in wasting money on top teir parts if you dont have to and I dont believing in doing everything cheaply as somethings you shouldnt skimp out on, like fuel and boost managment

@TURBOTRISTO 2 года назад

i already have a k24 box

@fabianfitness3627 2 месяца назад

Also do you have the specific person or company you bought this off or are they all the same

@TURBOTRISTO 2 месяца назад

they are all the same

@user-hh4hc2lt6e 2 года назад

What other injectors would work on this manifold without modifying the injector hole? I wouldn’t mind an injector upgrade and also not needing to cut/ sand the manifold more than i already have 😂 running a regular eBay fuel rail with a an line

@TURBOTRISTO 2 года назад

Any stock upgraded injectors should be fine

@user-hh4hc2lt6e 2 года назад

@@TURBOTRISTO I’m not sure what u mean. I got a 04 Acura tsx

@TURBOTRISTO 2 года назад

@@user-hh4hc2lt6e SORRY STOCK SIZE AND LENGTH WITH UPGRADED FLOW,

@user-hh4hc2lt6e 2 года назад

@@TURBOTRISTO but didn’t you have to bore them out for the stock injectors to work? I’m confused ..? If not i guess I’ll have to bore them out. Trying to use stock injectors

@TURBOTRISTO 2 года назад

barely i just put a drill bit in there to clean up the casting, I cant remember its been a minute since i shot that vid

@fabianfitness3627 2 месяца назад

How did this manifold work out in the end stock rbc prices are killer

@TURBOTRISTO 2 месяца назад

this manifold is ONLY worth it if you turbo your car and you correctly port it to match the factory ports and to clean out the casting slag inside, if you want to run NA you should never use this or any skunk 2 manifolds, they actually don't make any more power, the top end is exactly the same as stock and the mid range you actually loose more than 20kw in the midrange