Karcher VS Twinkle Star Surface Cleaner 

If you dont want those stripes do a pre treatment or post treatment or maybe even both, dilute chlorine with water till you get a 4% mixture, then just spray it all over the driveways before and after. Makes it look whiter too

Have now used this to clean house siding and it performed well ru-vid.comUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX I also bought some wand extensions which enabled higher washing without needing a ladder. I recommend both. This unit arrived quickly, was easy to assemble (only had to attach the handle), and arrived in perfect condition. The only very slight downgrade from a perfect score is the design has a low handle and requires pulling from the side. My old washer was an upright model, while this one is more horizontal. Other than that, it's perfect for my needs. It has a great deal of pressure and more easily cleaned the house siding, porch rails and concrete than did my older model. The engine is a bit louder, as well, but the total time to clean was reduced by the more powerful spray. Did I mention it starts on the first or second pull every time?!! I am definitely happy with this model.

I went through the same process and ended up getting the Twinkle Star Surfice Cleaner. Great video.

Hi. A couple of pointers for surface cleaning. First Make sure you wet down all grass and plant prior. Spray down area your cleaning throughly . This will help with clogging up machine and tip replacment Post treat area, I use a SH solution. Do sections and rinse them than go to next section Going back and forth than side by side.this will help with stripping issues. This will keep from dirt dring back onto surface. Rise area complete post treat area Than do another rinse of grass area Good luck with your business go get em

Hi Ethan I know your just getting started and that’s AWESOME 😎. Right now RU-vid is your best friend and if I could make a suggestion put all of your PW equipment away for at least a week. Then watch every video out there on surface cleaning check out Pre snd post treatment using BLEACH and learn how to mix how much bleach with water surfactant or soap. Surfactant is what we use to help the bleach dwell on what ever your going to clean. I’ve cleaned for about 7 years but this was 30 plus years ago snd a lot has changed so for the past two weeks I’ve been watching so many videos because so much has changed. Your surface cleaner might work better but go slow and even and use bleach before and after. Let it sit for at least 10-15 minutes before you pressure wash and then a lot of the super cleaners have suggested that post treatment is spray and go. I hope this helps and I certainly appreciate what your wanting to do. I think it’s great. Have a great summer and if your focus is on surface cleaning then the GPM is more important than the PSI. If you can get a 4000 psi and at least 4 or 5 gpm that would be perfect. If you want I can suggest a few RU-vid channels to follow if you want to learn from the best. Oh snd that’s not me by any means. 😬 Best of luck oh and get a .com too

💥 Great to see your self employment hustle. The streaking was because you didn’t overlap your passes enough.

Compatible pressure, extension rods and wheels! Got it and THANK YOU!

I have the same model, done about 6 jobs with it so far and it still seems brand new, mind you I take care of my equipment. Will buy again when it's time. Don't stutter when you say you are the best, believe it and you can achieve it!

Hi! Thanks for the great comparison! Could you please share the connection type between the Twinkle Star one and the hose from the pressure washer? Thanks a lot in advance! BR, Gabor

Looking at purchasing the Twinkle Star one. I'd like to know how it's held up since this video? Thank you

You get a lot of streaking because of how you clean. If you do a couple of passes the streaks are minimal. I have 2 cleaners the 15" Karcher and a 20" 4-wheeled and they both are great. Used Karcher for many cleaners and still like it. I got the wheel because I wanted more coverage and a faster outcome.

I was going to start my own Pressure washing business but after hearing you say you were the best in the world, I cant compete with that, So i guess ill just go back to my job at the Burger stand!

Surprised that German made device did not performed well, as I expected. Good to know , because I was thinking to buy one . Thanks a lot

As a Floridian, it looks amazing out there

Thanks for the experiment and sharing! Does the Twinkle star surface cleaner work with Karcher's pressure washer (those powered by electricity)?

just go across will get rid of stripes

Supposedly pretreatment and post treatment are the key to not having as noticeable overlap lines.

I can to watch the surface cleaner but I got to ask. What is the creation in the background at the 5 minute mark. Looks like a 50's chev bed with like a willys half cab.

The Karcher surface cleaner without the wheels is suppose to hover off the ground so that is glides and is easy to move so that is not actually a negative that is how it is suppose to function.

ethan try using different patterns cross flow then you will not leave strikes

Where did you get the shirts made? Quality looks decent

Look up a surface cleaner nozzle size chart. They work better if you match the GPM with your PSI

Check the dip tube on their water heater and I think you will find that it has started to break down and that's what you are seeing in the lines.

Where did you buy you’re shirts

If you have striping you are going to fast. Slow down. If you want to walk faster then go to 8GPM. Set up. Pulse pretreat and post treat. This will also help with striping

Epic last name dude!

Where’s the twinkle made?

What is you're he rate?

Where did you get the shirts? I liked the blue on you best.

Great video. Silly question but what's the point of the brushes if they aren't actually touching the driveway.?

Where did you get your t-shirts made?

I need an update on the minivan truck but this vid is sick

Awesome bro,best wishes on the future of your company. In your opinion,do you think that that surface cleaner can function well attached to a Honda 2500 PSI???

2:18 "my wand is kinda short"

I have a 3,000 PSI 2.4 GPM will twinkle star still work with my pressure washer???

I'm not sure if you made mention or not in your video, but is one better than the other with respect to leaving stripes in normal operation? I assume all surface cleaners leave stripes, at least the two I've owned before do, so I'm hesitant to buy either one even though they appear to be about as good as you get out there. Striping aside, which cleaner do you feel cleaned best and easier to use...sounds like Twinkle Star? THanks and good luck with the biz!

So after almost 2 years, would you please tell me if the Twinkle star still works? I bought a brand new Simpson and the wand stops spinning after 2 hours after initial use. It's really frustrating to find one that works reliably. Thanks for the video and hopefully you can tell me if the Twinkle Star still works after 2 years.

Cool

U need 4gmp with a b16 pressure washer .

You better not do that to a customer!!

Good video 👍🏽How did it go after with the twinkle star ? Is het highly recommended? Im planing to buy this one

So you started an llc without experience yet how did you get that started? And how do you approach customers not knowing much

400 bucks in australia

You’re moving way too fast with that one I just bought that one and it’s excellent moves easy you’re moving way too fast with it.

My mom told me that I was the best pressure washer in the world. WTF

You should private message me I’d be happy to make a Recommendation on a domain name.