Kawasaki KRX 1000, keep REPLACING Your Air Filter!!

Подписаться 6 тыс.

Просмотров 7 тыс.

50% 1

The KRX 1000 Air Filter is a BIG issue you should keep an eye on. Here is a little video about what we found on our KRX and others. Also worth mentioning is a Particle separator will do NOTHING for you if you still don't change the filter regularly.
Maintenance and inspection is your only defense until a better filter is offered for the KRX 1000. Spend some to save some.
Check out our videos here on the new UNI air filter. It’s better, cleanable, and reusable!
Thanks for watching and all your support!!
royoltyfreemusicfrombendsound

Авто/Мото

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 83

@1rustyshackelford 2 года назад

Thanks for this video Jake. I’ve had nothing but issues with dust getting into the intake with stock and R2C filters until I switched to a Baldwin filter. Like the Donaldson, it’s about a half inch longer than the stock filter and it works perfect, like it should.

@rockrunner4116 2 года назад

I have the KWT particle separator and it does a good job cutting down the dirt/dust that gets into the airbox

@CapN_Swagga 2 года назад

That flip forward kit looks like it gives you full access to that filter. Great products and service!

@fullaccessutv 2 года назад

Yes they do

@kaseyemd8504 2 года назад

Preciate the info

@bevanallen3032 Год назад

After finding and watching this video, I tried everything that was suggested, The three notches, Grease And A spacer on the bottom. All with a new filter .I still had dirt in the air tract. There was no signs of it getting past the seals, so it had to come right through the filter and this was with 250 miles Of light riding .I did this while I was waiting on the delivery of my new UNI.I had one on my 08 teryx and loved it ,cant wait to get one on the KRX tomorrow. Thanks for everything Jake.

@fullaccessutv Год назад

You are correct. And thanks for the purchase. The Uni filter was a mandatory thing for our rides. The stock filters

@markw5070 2 года назад

I agree, regret putting a k/n filter in my 2011 Polaris Xp900, destroyed my motor, never again!!!

@dr.who2 2 года назад

I had a polaris 900 200 Miles in dust the engine was whip starting burning oil before its first oil change. I had a 2015

@rogertrammell9061 2 года назад

What’s your opinion on the Wix #51358 it’s a little longer than the stock filter as well and I’ve always been under the impression that wix made great filters Good video, appreciate all the time you put into them for us😎

@jamesedwards396 2 года назад

Hey Jake, James here in Atlanta. I have many of the products you sell and you do a great job with keeping us KRX guys informed. What are your thoughts on the dry style R2C filter?

@fullaccessutv 2 года назад

How could it be clean?

@scottmckay3948 2 года назад

Just ordered a couple from yah, thanks for the tips. What do you think of the S&B particle seperator? I ran S&B on my 2015 RZR XP it really cut down the amount of dust getting to the filter on that machine.

@fullaccessutv 2 года назад

It helps, but it’s no replacement for maintenance. From what I’ve seen most people that have them don’t look at the air filter because they think it’s good. That’s really bad.

@calebunderwood2833 2 года назад

Nevermind you answered my question LOL

@parkersmith711 2 года назад

Great video. You might’ve mentioned it and I just missed it, but as a general rule of thumb, how often would you say replace the filter? 50 hours or once a year or sooner?

@fullaccessutv 2 года назад

Way sooner. It really depends on you and where you’re riding, but I’ve been pretty religious about mine and it wasn’t soon enough. That filter shown only had two trips on it.

@KRXBrandon 2 года назад

Yay, I'm (in)famous! 😜. I have been looking at the particulate separators that are available for the KRX. Have you had any experience with them? Also, do you have or recommend a video that goes over pulling the intake tubing off and cleaning it?

@fullaccessutv 2 года назад

Lol. Yes the separator’s help but in the end the maintenance is the main thing. There is no videos that I know of removing the intake tubing and air intake box. I know a guy though 😉

@gm780 2 года назад

Jake how much longer is your Donaldson compared to the stock, my car is a 2121. Someone said their filter was 1.5 inches longer than skock.I put a 1/2 inch spacer on the bottom on my filter to help with a tighter fit, and the door would not close. As for the three gaps along the seal I used silicone, but I let it dry before installing it. I would like to know your opinion on the washable RC2 . I hit the like button. 😀

@fullaccessutv 2 года назад

Thank you. I don’t remember the exact length but it’s around 1/4”. Read the other comments here about the rc2. We are working on a pre-filter for our filter now and in the next couple months will have a cleanable air filter available.

@HankMarducas Год назад

I have found that the NAPA gold filter fits really well. It also seems to be a quality filter. Two questions: Now that you have had ayear of changing filters more often, how often are you changing your filter? Secondly, how do you feel about using the air compressor to blow the filter out from the inside out every ride or two, in between filter changes?

@fullaccessutv Год назад

we have learned to no longer trust the paper filter and neither should you. We now make and sell a UNI foam oiled air filter that is always cleanable. The napa/wix are junk. Watch the video here on our channel. Even the new kawasaki motorcycles come with a oiled foam air filter, why not the KRX?

@57bugman 2 года назад

is there a ring for a secondary filter? when i worked on fork lifts, there was always a secondary filter inside the outer filter. and would putting a ring of grease around the filter help any ?

@fullaccessutv 2 года назад

Nothing and it does not appear the grease is helping

@marvinwilson5390 Год назад

great video Jake, what are your thoughts on a particle Seperator?

@fullaccessutv Год назад

They help some, but it’s the fine dirt that is getting in and they still let that by. Just less

@gm780 2 года назад

Update :I put silicone in the three notches of the stock filter, let dry. Then added a piece of 2"x2" piece of foam weather stripping to the door to put pressure on the filter and closed the cove. Now the cover springs open quick when the locking spring are undone.

@danheaney1011 2 года назад

what about using a little K&N filter grease around the intake side of filter?

@fullaccessutv 2 года назад

tried that.

@calebunderwood2833 2 года назад

How do you feel about K&N air filters or other washable air filters

@raptorshawn 2 года назад

did you not watch the video?

@ddm4v140 2 года назад

I take some grease on my finger and rub it on the seals and been doing it a year now and no dirt in the air tract might be worth a try

@fullaccessutv 2 года назад

we have tried it on all of them.

@michaellindsay4762 Год назад

How did the shoe goo work out after testing it. Also I was wondering what you think of the Trinity washable filters thanks Mike

@fullaccessutv Год назад

The shoe goo worked a little better but these paper filters are not the answer. The Trinity is definitely not the answer either. Lots of information and results are posted on the forums. We went to the UNI and have it looked back. Check out our newer videos on that filter.

@michaellindsay4762 Год назад

@FULL ACCESS UTV so is the new filter you sell is that get oil I thought the k&n type filters were not that great and did they fix the groves on the rear

@fullaccessutv Год назад

@@michaellindsay4762 they are oil foam filters. Not oil fabric like the K&n and others. The new uni we made is a clamp on. No push on issues.

@marvinwilson5390 Год назад

what about a uni filter cover that go's over the stock filter or your filter?

@fullaccessutv Год назад

This is 2 stage, so there is no need for a pre filter.

@SouthFLMudClub 2 года назад

I have always used k&n air filters with zero issues... Did you properly oil the k&n? That's wild to hear

@fullaccessutv 2 года назад

That’s actually not wild to hear. Most people in the racing world know that those filters do not hold up. Been racing off-road my whole life so I’m sure I had plenty of oil. Google it. Sorry.

@SouthFLMudClub 2 года назад

@@fullaccessutv I did read around on google and it seems like there are conflicted stories.. Some say they let it past some don't.... On my 2013 Grizzly I will say K&N is the best filter I have used on that particular machine but I clean it and oil after a dusty ride.

@stevescholler1552 2 года назад

What is the number on the Donaldson filter that u used. I like the fact that they are a little longer and having the pressure holding it in place

@fullaccessutv 2 года назад

Listed in the link

@rapsux 6 месяцев назад

I apologize, what is shoedo? or shoodew? I can't find it on line or don't know what that is? Silicone?? 2nd question is if you need to fill in those little slots on the filter, what is the reason they make it like this in the first place? There must be a reason they make it like this?

@fullaccessutv 6 месяцев назад

The reasoning they made them was for vacuum suction. However, we have gone away from using paper air filters in the Kawasaki. Check out our videos and we now have a UNI air filter made specifically for the Kawasaki. Lifetime and cleanable.

@rapsux 6 месяцев назад

@@fullaccessutv Thanks for letting me know that!

@bkambooboo 2 года назад

Why do the filters need the three notches? Seems like they are the main problem.

@fullaccessutv 2 года назад

not sure, but the main issue is the center radial seal that is sucking the dirt from those notches.

@tyronesebasky517 2 года назад

Maybe Donaldson can make one

@bretstephensen8821 2 года назад

Exactly why I told you before I adapted a UNI three stage Foam Air Filter to my car. Seven months later I have had no dust enter my intake tract since. People will not listen and most of them are in denial. Some people are like sheep and will follow each other off a cliff. I call them Sheeple.

@fullaccessutv 2 года назад

Agree. However I think that’s way too involved for the average customer to do. These manufacturers need to come out with something ASAP.

@peterkueffner747 2 года назад

I second that. I have moved on to a UNI. Made a small hole to tighten the filter clamp. No need for any goop.

@fullaccessutv 2 года назад

@@peterkueffner747 Agreed. They make one that fits, but the media is still too small. However it works if you keep it clean.

@cantseeme76 2 года назад

I looked on UNI’s site and found one that was close , but the clamping side was 3.5” and from what I can tell the one needed is 3.25”. What UNI part number did you use? I really think a UNI mod might be the best option till they release something better.

@gm780 2 года назад

Bret what the UNI part number?

@shannonstiles8751 2 года назад

What about those prefilters that. Mount on the roof

@fullaccessutv 2 года назад

they help, but knowing what your looking at and maintenance is most important.

@bradrichardson9774 2 года назад

What about the Kraken? Updates?

@fullaccessutv 2 года назад

soon hopefully.

@jimpainter73 8 месяцев назад

why not put a light layer of grease around the base which would stop silt coming through the base.

@fullaccessutv 8 месяцев назад

It may help. But in the end we realize the paper filter in. We have since gone to the UNI

@michaellindsay4762 Год назад

How often should I replace the airfilter

@fullaccessutv Год назад

We went to the uni filters we sell. There are a few videos on here about them.

@michaellindsay4762 Год назад

Can you send me the link to the uni filter video thanks Mike

@figureandfixit8066 2 года назад

Have you tried adding some grease/DC4 to the inside of the filter opening to seal it to the tube? I think that's where I'd start.

@fullaccessutv 2 года назад

We’ve been doing that for years. Just didn’t mention it in the video.

@figureandfixit8066 2 года назад

@@fullaccessutv I figured you probably had. You'd think that would be pretty effective against the leak by.

@fullaccessutv 2 года назад

@@figureandfixit8066 I definitely did.

@tahawknv4 2 года назад

What about the washable air filters?

@fullaccessutv 2 года назад

where? were waiting

@bretstephensen8821 2 года назад

@@fullaccessutv He is talking about the R2C Air Filters. Have fun with those!

@tahawknv4 2 года назад

@@bretstephensen8821 clean mine after every ride. The stock filters I've had traces of dust past the filter. Now I have a clean intake after every ride.

@bretstephensen8821 2 года назад

@@tahawknv4 You don't think that I have tested the R2C filters out? There is a full thread on the KRX forum that I posted about both the stock air filter and the R2C air filter letting dust past them. I know what I am talking about and can back up everything I say!

@tahawknv4 2 года назад

@@bretstephensen8821 👍