So I watched the whole thing but don’t know exactly how going into diagnostics mode helped. Note I bought mine 2nd hand and got no manual so maybe it was what told me why diagnostic mode was helpful. I never saw any diagnosis in the video. Thank you Appliance Flipper!
Once you've done the diagnostic - then what? Mine was pretty silent during 18/19 when yours was making a sound. Does that mean the agitation/spinning is not working? I don't see what the diagnosis actually is right now.
After diagnostic was finished it went back to 0:00 just as you said. If this happens does this mean nothing going on with the machine? I am having a problem with the washer. When the clothes are finished some of them have a stain like marks on them that appears to be lint. Is there a way to clean a lint trap?
My washer sounds like its washing as soon as i turn on the breaker for it and is giving a f3e2 code and will not let me do anything with bittons or knob any idea
Hold the cycle signal button down wait until the 8:88 shows up and then tap the spin speed button the 0: 00 should show and put in diagnostic for there.
Tried the 3 buttons 3 times and nothing comes up. Also start and pause button doesnt work. But the washer does turn on when i turn the big silver knob. Please help!
can you change the water level on these models? my clothes arent getting all the soap out during rinse on deep fill and two rinse cycles...5 pairs of pants shouldnt overload a machine like this right? thanks
I ran the diagnostic. No error message returned. During washing the 600 sounds like a bearing is out. Does not make this sound when spinning. Thoughts on what this could be?
What's the sound it's making? Usually, if the bearing is bad it'll make kind of a grinding sound when spinning. Diagnostic mode will not tell you if your bearings are bad.
Possible bad lid switch. turm washer off and try to power it up again. if that doesn't work unplug it for 5 minutes and plug ot back in and try to power it up.
