Kenmore Washer Repair - How to replace the Shock Absorber

Подписаться 72 тыс.

Просмотров 52 тыс.

50% 1

Need help replacing the Shock Absorber (Part wp8182703) in your Kemore Washer? Watch this how to video with simple, step-by-step instructions for a successful DIY repair.
Stay safe during your repair! Be sure to check www.fix.com/sa... for proper safety procedures before you begin. Use of this video is at your own risk, without liability to Fix.com.
Fix Part Number: FIX11745030
OEM Part Number: wp8182703
Why you might need to replace the Shock Absorber:
1. Noisy
2. Shakes and Moves
What tools you need for this repair:
• Adjustable Wrench
• Small Flat Blade Screw Driver
• Socket and Ratchet
• 7mm Nut Driver
The information in this video is specific to Kenmore, Whirlpool, and KitchenAid. To find a shock absorber specific to your model, visit www.fix.com
Not what you’re looking for? For more washing machine repair help click here: www.fix.com/pa...
Where you can buy this part:
www.fix.com/pa...
Connect With Us!
/ fixdotcom
/ fixdotcom
plus.google.co...
/ fixdotcom
Visit our blog: www.fix.com/blog/
Don’t forget to comment below and subscribe to our channel!

Опубликовано:

15 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@barry_was_taken8020 2 года назад

Thank You Sir, u explained the process perfectly. $35 for new shock absorbers. Washer machine works perfectly now. U da man!!!

@GaryTruesdale 4 дня назад

Thank you!

@runin1wild149 10 месяцев назад

I wish Sears made the front panel easier to remove to clean the pump motor filter basket. Which should be done every so often, some of the newer model have a access door but I still love my washer 20 plus years old.

@bp996959 7 месяцев назад

my front shocks just went bad and the machine vibrated violently off its concrete base on the floor! it was on its side when i raced down to the basement.. i bought my machine in 2005 at Sears and i guess i could buy an replacement but somehow i still love my Kenmore Elite.. it seems like such a solid machine!

@larrypriebe-jz5hz Год назад

Thank you , shocks and door lock replaced , your instructions were perfect, again thank you

@ianmacdonald2520 2 года назад

Clear instructions. Thank you! I would recommend replacing all four at the same time (I am not a professional).

@ralphgregory7616 10 месяцев назад

Absolutely

@igappleg3 3 года назад

Thank you for the visual I will be replacing the shocks on my mom’s 18 year old Kenmore Elite HE3t.

@danp859 4 года назад

Can you access the two rear shocks once the front lower panel is removed? Thanks.

@mobgma 4 месяца назад

I was able to but lots of cussing and swearing…

@amirsalib7277 3 года назад

Awesome thank you

@chrysippus7193 3 года назад

Huge help. Thanks!

@MrRiedemanJACC 4 года назад

Awesome video, thanks a ton, much easier than I thought. So, the next question is how do I tell which shock is bad of the four?

@MoeLilDel11 4 года назад

Replace them all if your washer is older like mine. 15 years. The from left was moving in the slot on the frame and making a lot of noise. I replaced it and the noise was gone but the vibration was still there. It needed all four.