Key fob programming 1995 Lincoln TownCar 

Thanks Jay! The keypad procedure didn't work on my 1995 TC, but the ignition cycling DID! It worked like a charm!

thank you, just bought a 96 tc.and had an old remote laying around. SUCCESS!

Thanks bro it work like a charm on my 95 Lincoln,I used the keypad worked on my first try 👌

I had an 07 ranger with that same fob. I didnt have the keypad, but cycling the ignition 7 times worked for me. I had to close all doors, make sure all doors were unlocked with the power lock button on the inside, cycle the ignition 7 times, the locks cycle and you press any button on the fob to program

I once had a 96 grand marquis the to program the remote all you had to do was enter the factory code which you did and then after that hold and press and hold 1/2 button for 2 seconds and then press any button on the remote control and then the lock's would cycle to confirm successful programming

Thank you Jay , you just show me how and where is the code located and how to open and closed my car😎👍🏼👍🏼👍🏼👍🏼👍🏼🙏🏼

Thanks, I’m going to try this today.

Thanks it worked on my dad's 96 Lincoln cuz I tried the others that you were talking about didn't work it had to been on the keypad for the door locks on the driver door thank you very much

Awesome video. Thank you

This will come in handy perhaps in the near future! Thank you!!

This was so helpful right now! Thank you very much bro !

Worked on my 97, thanks !

at first I did not believe the RU-vid video but when I actually tried it it works thank you

This video is f****** awesome it worked for me on the first try thanks a lot

Jay, i have a 01 Explorer Limited, to program my fab, i had to cycle my ignition 8 times, leave the key on, on the 8th time, the door locks cycle and then u press any button on the fab and its done.

Omg thanks for the code to doors. Had no idea

Remote locking. One of the best features ever fitted to vehicles. And sometimes, one of the biggest pains in the ass to sort out if it's not working or you got the car without any remotes, or (most commonly) one or more broken remotes (they don't particularly like being dropped, like pretty much any electronic component, and car keys are something that EVERYBODY drops pretty regularly...) Apparently, Ford went through so many remote systems during the '90s as, being common cars, they were the ones most targeted by thieves using code jammers or code stealers. So, Ford changed the system set-ups regularly to make life difficult for the low-lifes. The systems didn't become really standardised until the late '90s or 2000 when rolling-code systems were sufficiently well-developed and therefore cheap enough to be worth using on high production vehicles. The vast majority of Ford products made since 2000, whether European, US or Australasian products, use basically the same system and have basically the same programming techniques, though there are differences for vehicles whose chassis-type was introduced before 2000 and whose electrical/electronic system made using the rolling-code system inadvisable due to the risk of it creating ghost signals in other electronic systems, electrical cross-contamination, which can cause all manner of potentially serious problems...

I have the same problem with my 1998 Crown Vic LX. Cycling the key on/off 2-10 times doesn't cycle the door locks for programming confirmation. It was made in 12/97 and seems the fob may be specific for prior to June. You mentioned must have the older fob to do this. Phoned Ford and they said all Ford fobs are the same for 29 years??? I' don't know what to believe. I'll try the keypad way you did tomorrow. The code and then holding 1/2 will cycle the locks but the owners manual says that is only for adding your own key code or turning the horn chirps on or off. Did anyone else notice the owners manual forgot to show what to push to turn the horn chirps on/off?? They flat out forgot. Anyways, looking forward to tomorrow.

Wow thanks very much ! Save me a lot of money

Thanks i just re-install my two remotes for my 95 towncar

Thanks for the help!!!

Dang, couldn't get that to work on my 94. I need to drive my happy ass up from Columbia and pay you to do this for me. LOL

good video thanks for sharing

Thanks for the video very helpful

It Works man awesome !!!

Hello...I lost my original keys & fob,I bought a replacement and tried the keypad thing 1st when I got done with number sequence doors locked when I tried the fob it didn't work so I put in my 6 digit code,nothing,now my doors are locked and I can't even get into my car now...What do I do?..Thanks for your time

Worked perfect thank you

My 2000 town car was four turns on the key within 3 secs listen for to locks cycle then press the any button on your new key fob

The method you show on the keypad is the only way i can program my 95 town car remote.The owners manual shows a method that does not work.I tried them all also.Good info that does not appear anywhere

Thanks Jay

Will this work on a 1990?

Exactly which key fob do I need?

Didn’t ever work so how do I fix it the code we’re u said

How do u program a key less entery to a Chrysler Sebring gtc I was told that you had to have the organial to program it to the car

Okay how about all of this for a 2011 Ford Edge Limited???

What about a 1998 Lincoln town car that just have the key

Seems like no matter what I do (including this video) I can’t get my 97 to enter programming mode. Following this video my locks did cycle halfway through the second time entering the code but no luck with the fob. Any help??

Ok I have a 95 Town car.. Its the pin number then 1-2, 3-4 the pin then 1-2,3-4 the pin number.. Then try the new key fob?

Don’t work for me. Where is the sensor in the car ?

Thanks I never knew you could open all the doors and trunk with the key pad. Would that work on my 93 Lincoln.

I have a 1996 ex town car tryed the keypad way did not work try the turn key off 10 times that worked for mine.)

Does this release the anti theft mode?

Hey, did you ever look at the Corolla to see if the block is cracked? I hope not!

Помню у меня в багажнике была наклейка с напечатанными цифрами кода замка. На заводе наверное клеили.

great vid Jay. are you not in the pizza business anymore

Will this work on a park ave 96 with the key 11times?

Ford/Mercury/Lincoln is the only car company to use keypads on doors

OR....just use the key !

think you do you know if it will work on a 2000 ford taurus SE

Would this method work for a 05 Crown Victoria?? Hit me ASAP

Try going a little slower ,