KIA STINGER gets RAM AIR and IT'S LIT! EASY STEP BY STEP INSTALL - Velossa Tech

Подписаться 14 тыс.

Просмотров 33 тыс.

50% 1

#KiaStinger #LitKit #Install #TeamVT
Ok! We are putting the car back to stock and adding a special addition! The build will continue! I will be making more videos with b-role in the near future. I will also be investing in a wireless lav mic.
JB4 Affiliate Link - burgertuning.c...
Timecodes
00:00
0:38 - Intro
2:34 - Kia Stinger Injen Intakes
4:13 - Kia Stinger JB4 PNP Connectors
6:23 - Kia Stinger Removing Front Bumper
11:16 - Kia Stinger Removal of Shroud
13:41 - Kia Stinger LIT KIT SNORKEL INSTALL
17:49 - Connecting Power
18:55 - Wrap Up and Updates
NEW MERCH - twn2rbo.creato...
DISCOUNT CODE 8% at www.velossatec...
Amazon Link Clip Removal - amzn.to/3CZ54Ls
I will be making a separate video on the before and after IATS! Very interesting results!
Don't Forget to SUBSCRIBE so you are notified of the 5K GIVEAWAY VIDEO COMING UP. It will be free to enter.
MERCH LINK - twin2rbo.creat...
FOLLOW ME ON IG @ TWN2RBO
Email Questions or suggestions to - twn2rbo@gmail.com
The Velossa Tech Snorkels were provided with a discount in exchange for an install video and promotion. I still paid for this kit with my own money. No influence of opinion was advised.
As Always, thank you all for the continued support!

Опубликовано:

12 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 90

@ninthbit74 2 года назад

Another quality vid with good content. I always appreciate your efforts in presenting good information. Guess I have to add the VT snorkels to my shopping list now. 😀 Keep it up brother! The more mods you add the more I add!

@twn2rbo 2 года назад

That’s awesome bro ! That’s what’s all about 👊 appreciate the support

@SlipAngleG70 2 года назад

Great content! Those stock inlets that face up have been measured to be very restrictive. Removing them drops the intake vacuum from 9 to 4 inches as tested by a Stinger forum member using a mano meter. There was also testing by another member that showed great gains in the 1/4 mile by removing those and adding the VT snorkels with the stock air boxes. The question I have is which one makes the most difference. Anyways. I'm enjoying your channel! The VTs and Injens look awesome!

@twn2rbo 2 года назад

I believe it! That’s awesome, I can definitely tell a difference when dropping down to 3 gear and doing a pull, esp right now since it’s colder out here.

@twn2rbo 2 года назад

Learning a lot as a new creator, I understand that audio quality is VERY important. With that said, I am going to invest in some wireless lav mics. I will need them when I start making content with Zo, the M3 competition. We are going to race, do digs, rolls, track days, and swap cars for a day. Subscribe for more 👊

@Percol8r 2 года назад

Looking forward to meeting up with you one day soon! I actually just moved from Indy a little over a year ago, so to see your shots in the city, especially over off my old exit at 56th/Shadeland was cool! I’m new to the Stinger community, but I feel like mines is pretty badass already! Looking forward to some of these mods though!

@StreetbeefsScrapyard 6 месяцев назад

your video helped with install. I ran the wire through the firewall, so its right next to my brake snip switch. love the kit though, hope the LED's last .

@alexandermcdole8464 2 года назад

Very nice looking stinger and perfect mods 👍.

@badgoatnation1714 7 месяцев назад

Sub earned looking at picking one up soon as a daily till I save up for a c7 zo6 or a trx and looking at the modding community by far your one of the best content quality wise.

@lukemothug 2 года назад

Any future heat shields going to be installed for the air filters?

@twn2rbo 2 года назад

Yes - I would like to grab some carbon fiber ones but I’m checking into options

@drumtimer 2 года назад

Thanks, I'll use this video for my G70, it should be similar.🙂

@kellyaustin7487 2 года назад

Excellent review/video! However for me, not feeling the lit part of the kit. As you said I'll just take the functionality! Thanks for sharing.

@oolou041 2 года назад

Awesome how to video! I just recently bought a 2019 kia stinger as my daily and will def be doing these modz! much appreciated!!! :)

@1011001110001111a Год назад

Your page is incredible man, great info. Thanks for sharing. Just picked up a 2023 gt2 awd, excited to see where i can take it. I'll be referencing your videos a lot 😅

@twn2rbo Год назад

That’s awesome! Appreciate you, thanks 🙏

@392Reviews 2 года назад

Love the informative vids!

@twn2rbo 2 года назад

Thanks bro! Yeah that was a nightmare man, the audio was destroyed on the primer lol , I had to reupload it. Learning as I go 😆

@nicholascleveland7694 2 года назад

Just installed mine last week, did you ever figure anything out or downsides of the package they give you for the kit?(dead battery video didn’t give me warm and fuzzies) I’m looking at a custom lighting shop to do headlight work and underglow. Was thinking of having them integrate the Lit Kit into that circuit. Love your content man, if there is a go to for Stinger vids, it’s you!! Keep pumping them out!

@twn2rbo 2 года назад

Yes and yes, so I narrowed down what happened and I think it has to do with the app. If you leave the lit kit connected and disconnect the negative battery terminal to work on your car, it will auto turn on when you put the negative battery terminal back on and then the app will not shut the kit off until you manually unplug the lit kit under the hood. I’ve had a couple other people message me the same thing so I’m pretty sure that was it. I want to tap my power into the fuse box, I think that would eliminate it. If not it’s an app issue

@nicholascleveland7694 2 года назад

@@twn2rbo Thanks for the info, definitely some weirdness with the app. Just wasn’t sure how much I trusted the grounding points, I’ll be tapping into the fuse box in the future for sure. Thanks for the reply broski!

@Beskar_Sleeper 4 месяца назад

@@twn2rbo hi I’m a little late to the party, but I was wondering if you ran an actual dual in line fuse instead of adding to the post of the starter on the car? I just installed the light kit on my scoops today and when I first hooked it up the lights would actually stay on and then I disconnected the battery and reconnected it, connected to the lights with the app and then clicked shut off in the app and then when I turned the car off, the lights were not on all the time anymore. I still use the switch to shut the circuit down, but I was wondering if I left the switch on and the LEDs were not on if there were stall a draw on the battery because it was hooked up to the starter post? I hope that makes sense. 😂 Thank you.

@slackerx10 2 года назад

You really should have done the MM intercooler since you were already in there. Anyways, I’ve been up and down about the snorkels for a few short months now. Seeing how they look along with how well they function, I’m now seriously considering them. Being that I am in central Florida I am for sure going to go with them as well as the MM intercooler as well.

@twn2rbo 2 года назад

100% agree. I’m holding off on it for a couple months while the weather is really cold here right now. FMIC is a must with the mods I have.

@ricokimbro4316 2 года назад

Nice! Just wish I had a personal mechanic like Papa!

@twn2rbo 2 года назад

Hahaha facts! I’m on my own here but it gets me out of the office so

@djenygma1377 2 года назад

I like it, I would just install different LED headlights to match the new lights you put in.

@twn2rbo 2 года назад

The headlights can be hard to video , they always show up a little different. But I agree, I want to change them up with some brighter LEDs close to a pure white

@djenygma1377 2 года назад

@@twn2rbo nice 👍 I'll be here for it 🤘

@CameronMills1990 2 года назад

I have the AWD too but I swear I get sideways too easy when it rains lol

@jeffboss4317 2 года назад

Have you noticed any overheating issues since you removed the shroud that directs air into the radiator?

@IronGumby Год назад

I'm wondering about this as well. That's not a required step of the install, right? Can we leave it in and still use the snorkel(s)?

@Dwiggy0 10 месяцев назад

Excellent Video! I have just recently bought a Stinger GT and I love it! been watching a heap of your videos thank you for your commitment to your channel. I do have a question about the Lights... Would it be possible to wire them up to the headlights so that they turn on when the headlights turn on? Thanks again for your content!

@taylorbee4010 2 года назад

Went by the old dealership I used to work at it seems they made the 2022 recent models actually a little bit shorter. The body frame looks identical to the K5 other than the actual outer body pieces

@dantony136 2 года назад

Amazing Stuff

@LUIBROWN17 4 месяца назад

Wow ❤🔥🔥🔥 that’s is so siiick

@raythorn1671 2 года назад

Hey mate how are you, Love these and intend fitting some to my 22 GT. One question now you've had time to test in real world conditions: Water? Do the filter elements get wet from driving in rain, or say going through car wash. What checks are you doing routinely on the filter condition? Cheers from Straya, Ray

@twn2rbo 2 года назад

Great question and I’ve tested that throughly, no water has made it on the cones so no worries

@icheema3671 2 года назад

My dude thanks for the detailed video. How did you unclip those wire harnesses at around 13:20 when taking shroud out?

@twn2rbo 2 года назад

NP bro, just grab some needle nose pliers and squeeze/pull

@robertruiz9466 Год назад

Looks amazing

@carlosmolinapasaye704 4 месяца назад

You have happen to know the part number to the part where you removed the rubber seal to use on the new kit?

@twn2rbo 4 месяца назад

I do not sorry. Check with Velossa Tech

@Black2ghost 2 года назад

She's finna Bust!!!! 🤣

@twn2rbo 2 года назад

😆

@utuber1232 2 года назад

Well done 👌.

@jamesramirez7733 2 года назад

At 6:05 in this video, you mention you like the concept of the "glow" and that it's not too bright... Does this mean that the non-glow or other colored scoop bodies that are available are brighter than the glow LEDs??

@twn2rbo 2 года назад

Good question, no the other ones will not glow on their own naturally like mine. They are just hard colored plastic but once you turn the lit kit on, they will be just as bright as mine. Mine are an off white glow plastic that charge with light which doesn’t drawl as much attention as a solid white air duct would. Tbh I don’t turn them on that often, I got them to lower the intake temps and cool off the engine bay. But when parked or showing people they love them. Sometimes I roll with the white LEDs turned on to match the DRLs

@michaelellis2775 2 года назад

. It's time to change those tiny charge pipes. Bump it up to 3" And let some air flow through

@orlando1340 2 года назад

Nice video for sure. . About how long did it actually take to do the install?

@twn2rbo 2 года назад

Real time it took about an hour my first go. Now I can get it done in about 30 mins not rushing

@tannerbohack363 Год назад

I know this was a year ago, but do you remember having to tune the stinger after installing the intakes?

@twn2rbo Год назад

No tune needed on the intakes, but after I added a cat back with the intake, I did. It would go into limp mode all the time. The JB4 fixed that. Intakes only, no issues

@andrewmatthews25 2 года назад

So did there end up being any difference in IATs?

@twn2rbo 2 года назад

Yes

@superflunker87 Год назад

I'm thinking of getting the regular ram air or lit kit. Which one do you recommend and why?

@twn2rbo Год назад

Regular. I ended up doing an update in a vid not long after and I was having an issue with the LEDs, it drained my batter over night and the app sucks, well it did at the time at least. Diode Dynamics is the software. They may have updated it since, but I never turns them on really bc it’s easy to forget you leave them on etc. I would do regular if I did it all over again, same performance just aesthetics change

@superflunker87 Год назад

@@twn2rbo thanks. I'll prob get the regular for simplicity of install

@twn2rbo Год назад

@@superflunker87 good choice, have you picked out an intake yet? These snorkels with the AFe / Takeda intakes are 100% the best option.

@twn2rbo Год назад

@@superflunker87 you can see them here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--Yjd2y1nMfo.html

@gf1945__ Год назад

Where did you get the grills

@twn2rbo Год назад

Grills are oem , I just masked them off and hyper dip them matte black

@therod785 Год назад

Are these fine to drive in the rain ?

@twn2rbo Год назад

Yep! I checked them after driving in the rain several times and the cones stay dry

@MrPl0xygen Год назад

im just surprised by how many people got this and haven't had any sort of water ingestion. Like its an amazing product and concept because its are right to the box and filter, but at the same time the factory system seems like it keeps water and FOD out?

@twn2rbo Год назад

That’s a valid concern, I actually made a video shortly after doing a before after driving through a bad rain storm, cones were completely dry though

@MrPl0xygen Год назад

@@twn2rbo that's quite interesting, they were probably dry because of the gap still between the intake snorkels and the cone filter, if it was connected to the factory box still, it probably would have soaked a panel filter?

@twn2rbo Год назад

@@MrPl0xygen you would think but I know ppl that have dropped a k&n oem style filter in with the snorkels and have no issues after driving in the rain

@MrPl0xygen Год назад

@@twn2rbo true yeah, i got a buddy in FL that has a GT Line 2.5T with the snorkelers and im heavily wanting them, but living semi-rural its hard to find a good shop to help.

@twn2rbo Год назад

@@MrPl0xygen I have a step by step install video if that helps, I also have a 4 min video on how to remove the bumper, good luck! I hope you find success with it

@Justaliltlebitt 2 года назад

Any problems with heavy rain?

@twn2rbo 2 года назад

Nope, I’ve made some IG posts and I know I put a clip in one of my RU-vid videos pulling over after heavy rain on interstate and cones have been dry every time. The only time people have issues with the cones getting wet is with heat extracting hoods. Injen makes hydro covers that hep with that, but totally separate issue

@jamesramirez7733 2 года назад

What year car is this? My 2022 looks slightly different than yours

@twn2rbo 2 года назад

Mine is a 2021, I purchased it 2 months before they announced a refresh was coming

@jamesramirez7733 2 года назад

I hit the Velossa link and only shows 6% off; no 15% discount code

@twn2rbo 2 года назад

Hanks for letting me know, I will ask them and update the description accordingly if they changed it. This was a few months ago

@jazzbeau507 Год назад

Nice accent.

@Etwize83 2 года назад

Does anyone know where I can find a cold air intake filter for my 2022 Stinger GT line 2.5L turbo

@twn2rbo 2 года назад

I order most stuff from K8stinger Store and KMTuned - I’ve seen some 2.5 stuff there but not sure on the intakes

@Etwize83 2 года назад

@@twn2rbo thank you!!! Appreciate you

@twn2rbo 2 года назад

@@Etwize83 no problem, They have some Black Friday and cyber Monday sales right now too

@Etwize83 2 года назад

@@twn2rbo sent you a video on IG.. installed a AEM cold air intake system in the 2022 Kia stinger GT line. Kept the main hose, installed filter, modified cone!!!! The ppffff!!! Of the intake and turbo sounds awesome. Thanks for videos made me want to modify my whip

@twn2rbo 2 года назад

@@Etwize83 nice bro!! 👊👊

@Asalyers1 Год назад

How many times have you forgotten to turn them off… hahah kinda annoying to have to remember to turn them off every time.

@twn2rbo Год назад

So many lol, I quit turning them on bc I had issues with them. One time it drained my battery with only 10k miles on it.. I would get the not lit ones if I did it all over again

@YoungBurr94 2 года назад

Will you be adding a water meth injection in the future?

@twn2rbo 2 года назад

I’ve considered it, I want to fit the dyno next to see where we stand. I’m also looking at CPI mod. Intercooler will need to be one of the next performance mods, it’s winter now so I can get away with it, but come spring