***EDIT TO THE VIDEO!!!*** Switch needs to be in the OFF position to use the boost for launch control. You’ll know if it’s working if you don’t see the launch control ready notification in the dash. Only keep the switch in the ON position when: -Starting the car and -When normal driving
My switch was in the correct position. The “I” is the “on” position. When i switch it off, the car won’t start unless i switch it in the position it’s in for the video. Also the brake lights don’t activate with the switch off either. And as you can see in the video, i was still building boost and spinning tires with light throttle.
Will this still work if i just remove the switch after starting the car and put the fuse back in. Will it give me some kind of light after i put the fuse back in.
I don’t see why not. You’d just have to make sure you have that correct fuse in the switch. If the AWD fuse is a 10amp then you would just plug this in and go. But the AWD fuse is in the engine bay so you’d need a much longer switch to run inside the cabin. Or you can keep this switch and switch it off from under the hood every time you want to turn off AWD.
The guy who makes tgem is Tanner Meade. Look up “Boost Launch Harnesses” on FB. Join it then watch for when he makes a post for you to get in on an order. He’s going to post a drop for 10 available ones to order on the 3rd of July.
