Тёмный

KidKraft/Cedar Summit Tube Slide Tips | Kid Kraft Preston Play set 

Mark Pappas
Подписаться 1,4 тыс.
Просмотров 9 тыс.
50% 1

Sorry about the wind noise...this is not my typical content.
I recently put together the KidKraft/Cedar Summit Preston playlet. The playlet itself was relatively easy to do with 1 other person...the tube slide however was next to impossible and took longer to put together than the entire playlet. This is the same tube slide included in the KidKraft Castlewood, Lookout Lodge, Preston and several other playlets.
I strongly recommend buying a box of 50 1 inch 1/4 screws at your hardware store they should run about $5. And to be clear I did use the included screws to put the individual sections together - but used the 1 inch screws to join the sections of the slide.
#kidkraft #tubeslide

Опубликовано:

 

16 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 38   
@cgoosrun2
@cgoosrun2 3 года назад
I love you. Thank you
@patrickallen7363
@patrickallen7363 2 года назад
Just finished mine your video helped me tons. We ended up using vice grips to hold each elbow joint together then feed the screws through
@njb570
@njb570 Год назад
I helped a neighbor with this in 2021 and told my wife, never gettig a tube slide. Yet here I am, even though i did it before 🤣
@AlexandraVegaAronne
@AlexandraVegaAronne 3 года назад
Oh my gosh! Thank you sooo much! It is impossible to put it together. We are on the way to home depot to get the ones you mentioned. Thanks a lot for sharing this!! You are an angel!! 👼
@markpappas
@markpappas 3 года назад
I hoped they helped!
@AlexandraVegaAronne
@AlexandraVegaAronne 3 года назад
@@markpappas It helped a lot! Kids love the Playground. we got exactly the same screws from Home Depot and they worked perfectly. Thanks sooooo much for sharing. :)
@TyHunt
@TyHunt Год назад
Your my hero thank you 🙏🏼
@orbitalchild
@orbitalchild 3 года назад
Thank you for this. My kids got one of the KidCraft swing sets a year ago and we still haven't gotten the damn slide together. I'm going to try this tomorrow
@markpappas
@markpappas 3 года назад
Good luck!
@joev707
@joev707 4 года назад
Dude this tube slide assembly is definitely the hardest. I can’t figure out where they want the little yellow tube slide support that attaches to the 4th elbow assembly (and screws to the left rear corner post). Was hoping your video would show where the tube supports are all supposed to attach. Directions say the little yellow support should attach to the clamp ring but the ring doesn’t line up anywhere near the rear corner post.
@markpappas
@markpappas 4 года назад
They want you to undo one of the screw in that ring to attach it. No thanks. I skipped that part. It’s impossible to get in there to do it. I weigh 185 and went down the tube slide...it didn’t move so if I didn’t mess it up my tiny 5 and 1 year olds won’t.
@joev707
@joev707 4 года назад
Mark Pappas I took one pan head bolt out of the seam that joins the two halves of the 4th elbow assembly, which was closest to where that little yellow support is supposed to attach. The KidKraft video instructions, although for an outdated model of tube slide, shows the support goes where I put it. The instruction manual says to attach to the clamp but the clamp just isn’t anywhere near it. Also, the bottom of the slide (last elbow) really jams up against the side of the fort. Surprised there wasn’t more clearance. But finally got through it. On to the roof assembly next.
@joev707
@joev707 4 года назад
By the way, had a feeling you were from the Philly area by the sound of your voice. Just sounded local to me. Checked your profile and saw that you are...me too (Delco; now South Jersey).
@malinois73
@malinois73 4 года назад
Hey man. Was the final part a pain in the ass??? Mine only aligned 1 hole
@joev707
@joev707 4 года назад
malinois73 Almost every step of aligning the elbow joints of the slide were a pain. Really had to put pressure on the whole thing to get the holes to line up, even the last step. Best to stick a couple of screwdrivers through the holes to hold the alignment in place while you tighten the first screw and locking nut.
@JonVaught
@JonVaught 10 месяцев назад
What is the height from the ground to bottom of the opening if of the slide?
@mattblackhurst4081
@mattblackhurst4081 3 года назад
Hi, I was just wondering if you know the dims of the play centre minus the A-frame swing part? All the dims online are for the complete play centre.
@brittanyjaboro
@brittanyjaboro 3 месяца назад
do you think the tube slide provides support to the playset? do you think you can do without the tube slide and close area off?
@markpappas
@markpappas 14 дней назад
the tube slide doesnt provide support at all.
@paulfavale5273
@paulfavale5273 3 года назад
I recommend putting the slide together completely and then attaching to the rest of the swing set, saved me a bunch of time and aggravation
@markpappas
@markpappas 3 года назад
If you did it by yourself you’re a super hero. That thing still gives me nightmares
@paulfavale5273
@paulfavale5273 3 года назад
@@markpappas haha not quite that good. Needed help attaching it to the rest of the set
@spdracr4life
@spdracr4life Год назад
Great tip. I have an issue getting that brace to line up and no matter what I do I can't get it. I'm ready to throw this thing in the trash. Could you share some tips on that brave mounting or maybe take a quick video of how it mounted for you?
@markpappas
@markpappas Год назад
Not sure what you mean about "brave" - typo?
@spdracr4life
@spdracr4life Год назад
@@markpappas definitely a typo. I'm talking about the vertical wooden brace that holds the slide up.
@donngu
@donngu Год назад
Do you recommend springing the $600 to just get it installed?
@markpappas
@markpappas Год назад
I mean its subjective - if you have the $600 laying around def do it. I would have paid for assembly but they weren't offering it during Covid...
@Chloe.zyxwvu
@Chloe.zyxwvu 2 года назад
Thanks for this. Have been torn between this set and one from Gorilla. How did the KidKraft set hold up over time? Is the twisted slide still holding up? Is the bottom clubhouse big enough for kids over 5?
@markpappas
@markpappas 2 года назад
So far so good 2 years later. My oldest is now 7 and she still uses it often, top and bottom clubhouse.
@Chloe.zyxwvu
@Chloe.zyxwvu 2 года назад
@@markpappas Found a deal at Sam's Club and just went for it. Thanks!!
@ieseniameza5307
@ieseniameza5307 4 года назад
I ordered this play set but fed ex lost box 5 out of 5 😖
@markpappas
@markpappas 4 года назад
oh man isnt that the box with all of the hardware?
@AlexandraVegaAronne
@AlexandraVegaAronne 3 года назад
This happened to me. Call kidkraft, they will ask you to call the place where you bought it. In my case walmart. Walmart made a refund. You send that prove of retun to kidkraft and they charge you that exact amount and sent you the box 5 of 5 which is the slide. It has happened to a lot of people. I called also fedex and they said that they lost the package.
@mariamayon8927
@mariamayon8927 3 года назад
@@AlexandraVegaAronne did you get the 5th box? Was it just the slide? I need to do this because we are also missing the fifth box
@AlexandraVegaAronne
@AlexandraVegaAronne 3 года назад
@@mariamayon8927 Yes, After i did the process I explained in my comment above i did get the 5th box. It is the yellow slide. it comes only wrapped in plastic but it arrived like in 2 weeks after i contacted KidKraft helpdesk and sent them the receipt from Walmart showing the return of part of the money. They charge you exactly that amount on the phone. I hope this helps
Далее
Cedar Summit Tube Slide Installation
5:09
Просмотров 40 тыс.
How To Build A Wooden Playhouse And Swing
17:35
Просмотров 22 тыс.
KidKraft TNR4 Playset Slide Step by Step Assembly
5:54
TUBE+SLIDE+INSTRUCTIONAL
5:03
Просмотров 18 тыс.
Building the Kid Kraft hilltop playset
12:42
Просмотров 24 тыс.
Building the Ainsley KidKraft Playset
16:01
Просмотров 98 тыс.
KidKraft Swing Set SELF-ASSEMBLY Tricks & Tips
4:13
Просмотров 14 тыс.
Big Backyard Tube Slide Installation
5:09
Просмотров 16 тыс.