Тёмный

King Suspension Install (3") | 5th Gen 4Runner 

SnailTrail4x4
Подписаться 31 тыс.
Просмотров 85 тыс.
50% 1

Today we installed a 3" lift King Suspension lift on a 5th Gen 4Runner. This kit was a great kit from filthy Motor Sports, very straightforward with good instructions.
To do this install it would be very nice to have a friend and an extra hand. Removing the shocks and removing the pivot bolt is difficult by yourself.
Get this Kit from YotaMafia:
yotamafia.com/product/king-0-...
Tools we used in the install:
Cheap Door Trip Tools: amzn.to/35uF0dI
GEARWRENCH 3 Pc. Body Clip Plier Set: amzn.to/3pC8Wga
GEARWRENCH 3/8" Drive Electronic Torque Wrench: amzn.to/36yhBY3
GEARWRENCH 1/2" Drive Electronic Torque Wrench:amzn.to/3ktZzLF
GEARWRENCH Ultra-Thin Flex-Head Work Light, 500 Lumen: amzn.to/2ICHkXk
Perfect beginner Tool kit: amzn.to/326ReVf
Video Review of the Kit: • 216 Pc. GearWrench Too...
Ratcheting Box End Wrenches: amzn.to/2nLjRoy
Video Review of the Wrenches: • What is one of your fa...
00:30 Disconnecting Spindle from Upper Control Arm (UCA)
2:23 Removing Pivot Bolt
4:25 Remove OEM Coil-Over
5:02 Installing New King Front Coil-Over
8:02 Adjusting UCA
8:30 Installing UCA
10:07 Connect UCA and Spindle
12:12 Install Front Shock Reservoir
14:37 Remove OEM Rear Shocks
16:35 Install Bracket for Sock Reservoir and Bumpstop extender
17:16 Trick to Remove OEM Rear Coil Springs
18:15 Explaining Coil Springs
19:07 Installing New Coil Springs
20:13 Install Bumpstops
20:31 Installing new King Rear Shocks
22:30 Install Rear Shock Reservoir
The Exact Kit from Filthy Motor Sports:
www.filthymotorsports.com/Kin...
Don't forget to subscribe!
-- keep crawling --
*******************************
FOLLOW US ON SOCIAL MEDIA
Website - snailtrail4x4.com
Facebook - / snailtrail4x4
Instagram - / snailtrail4x4
Twitter - / snailtrail4x4
Google+ - plus.google.com/u/1/105004491...
*******************************
LIST OF MY CAMERA GEAR
DJI OSMO - amzn.to/2vMqTPP
Rode VideoMicro (compact) - amzn.to/2fxEy6S
DJI Mic Mount - amzn.to/2vMxTMJ
GoPro 8 Black: amzn.to/33kDp9P
GoPro Media Mod: amzn.to/31ffhmm (Hero8)
GoPro Max: amzn.to/39TGQoZ
SanDisk 256GB Extreme microSDXC: amzn.to/2XpWaVu
Rode VideoMicro Go - amzn.to/2hRkoW9 (No Batteries Version)
Bendy Tripod - amzn.to/2vMs9m0 (DSLR Version)
Bendy Tripod Head - amzn.to/2uNxMfb
DISCLAIMER:
Some of these links are affiliate links at no additional cost to you. I will end up receiving a small commission if you end up purchasing some of these tools or products in the links. In some cases, you will actually receive a discount. I believe in being transparent with my community, and hopefully, with providing you with tools of the trade, you will, in turn, have no problem helping me out.
#snailtrail4x4 #toyota4runner #offroadtoyota

Авто/Мото

Опубликовано:

 

14 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 163   
@Summitclym
@Summitclym 3 года назад
I’ve been a little intimidated doing spring compression and shock fitting on the install but you make it look easy with the ratchet strap and compression kit. Thanks for the great video!
@SnailTrail4x4
@SnailTrail4x4 3 года назад
Safety first!
@richardjohnson6874
@richardjohnson6874 Год назад
Thank you for the very helpful vid. On removing the rear shocks, I found it easier for the vice grips to go 7cm below the top, under the grommets/bushes.
@86curryman
@86curryman 3 года назад
Awesome video! Nice touch with torque specs and tool sizes.
@SnailTrail4x4
@SnailTrail4x4 3 года назад
Thanks, I try and add those as often as needed
@Libertarian_Neighbor
@Libertarian_Neighbor 3 года назад
Thank you. These videos are amazing. Keep up the good work! 👍
@SnailTrail4x4
@SnailTrail4x4 3 года назад
Happy to help, that's for commenting
@freedomfighter2911
@freedomfighter2911 2 года назад
Thorough as my borough! Great content bub.
@White_buffalo_4r
@White_buffalo_4r 3 года назад
this is a very good tear down and install video thank you very much cause I am getting ready to ours soon
@SnailTrail4x4
@SnailTrail4x4 3 года назад
Awesome, glad to help
@Mortiz350
@Mortiz350 3 месяца назад
U can tell how safety is a priority with this guy 😂
@iddddaduncan
@iddddaduncan 3 года назад
End result picture with ride quality comparison of stock vs lifted would have been nice.
@jasonno
@jasonno 3 года назад
OH MY DAAAMN man! that 2x4 is genius! I wish I knew years ago when I did my install. I'm so happy for this video since I have to replace my shocks.
@jasonno
@jasonno 3 года назад
@snailtrail4x4 with zero threads showing. What is your spring rate for the 3” lift?
@hijinks21
@hijinks21 2 года назад
I use to do that myself. Just sit on the 2x4.
@franciscocisnerosjr7101
@franciscocisnerosjr7101 2 года назад
Is this the best lift kit for a 2x4?
@00SingleSeven
@00SingleSeven 3 года назад
Great video. I think I will install my spacers by removing UCA instead of messing with the kdss. It look like I might be able to put the spacers without actually taking off the UCA but either way I will have fun.
@SnailTrail4x4
@SnailTrail4x4 3 года назад
Yes, you can add spacers with the UCAin place
@jailbreakoverlander
@jailbreakoverlander 2 года назад
Well done man
@SnailTrail4x4
@SnailTrail4x4 2 года назад
Thanks
@dat1dsm
@dat1dsm 2 года назад
Wow. You made it look so easy. The KDSS sway bar has been scaring me but looks like you didn't even have to remove the 2 bolts from sway bar/low control arm.
@SnailTrail4x4
@SnailTrail4x4 2 года назад
Nope, no worries
@dat1dsm
@dat1dsm 2 года назад
@@SnailTrail4x4 you didn't have to touch anything at all with KDSS upfront?(strap down, jack, or removing the 2 bolts on low control arm) Having the front wheels hang in air doesn't over extend or affect the KDSS? Maybe im just over thinking it lol. I've been reading a lot of back n forth on forums but then again, they're old threads
@SnailTrail4x4
@SnailTrail4x4 2 года назад
@@dat1dsm I've never done the two bolts on the bottom of the lower control arm, but that seams easy. But it's not bad
@dat1dsm
@dat1dsm 2 года назад
@@SnailTrail4x4 last question i swear lol, did you find it harder doing the driver side FIRST? I hear it's easier doing that passenger side first. Just trying to be really prepared so when I receive my kings in. I ordered them about a month ago =\
@dtrn750
@dtrn750 2 года назад
You made that look so easy. Now I feel confident switching my Icons to Kings. I don’t know why everyone was making it sound so hard to install due to KDSS.
@SnailTrail4x4
@SnailTrail4x4 2 года назад
It's not hard, definitely doable. Even for me a dude playing a mechanic online
@alexortlieb3434
@alexortlieb3434 5 месяцев назад
@@SnailTrail4x4 playing or not, you do a great job describing the steps and struggles in detail. Keep it up!
@pewterZ01
@pewterZ01 3 года назад
You can avoid the spring compressor and using a bottle jack to push axle down by simply disconnecting the track bar on the rear.
@SnailTrail4x4
@SnailTrail4x4 3 года назад
Good to know 👍
@joeburgart750
@joeburgart750 3 года назад
Hi. i'm a new 4Runner owner and in looking around for info have found your videos to be very relatable and helpful for my needs. Quick question for you: what coil compressor do you use? do you recommend it? Thanks, Joe
@SnailTrail4x4
@SnailTrail4x4 3 года назад
Here is a video I did. The short is, it's cheep and from china and I needed to fix it after I got it. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-aEWz30c3GPw.html
@jamessanchez4208
@jamessanchez4208 3 года назад
Do you need extended brake lines for the 3 inch lift on the KDSS system Runner.
@eddiesorianog
@eddiesorianog 2 года назад
Did the 4Runner have any lean after the install? Did the rear springs require any spacer to correct for lean if any? Also did the king shocks come adjusted equally on the front?
@brianaustin1328
@brianaustin1328 3 года назад
Too bad you didn’t actually *show* the final results...
@AndreyNabutovsky
@AndreyNabutovsky 3 года назад
he always does it lol or not haha
@gevorgnazaryan8720
@gevorgnazaryan8720 Год назад
Did you add any spacers to the swaybar to accommodate for the lift?
@brenwesterland6306
@brenwesterland6306 3 года назад
One thing you missed was the torque on the rear shock top nut. Did you just guess since im assuming you couldnt fit up there. Thanks so much for sharing!
@SnailTrail4x4
@SnailTrail4x4 3 года назад
Yeah I don't have a crow's foot, so I can't get the correct torque. Typically on the top of the rear shocks I exposed two to three threads and call it good
@jasonno
@jasonno 3 года назад
what I've done and many of my buddies, we wrench the nut down and watch the rubber squish until its flush with the washer. bam! lol.
@smashwindow01
@smashwindow01 Год назад
I honestly think it's easier to turn off the KDSS by closing the valves and disconnecting the sway bars. If you're installing the KDSS spacers in the back, you will have to do it anyway, and then the rear will droop out enough to avoid messing with the jack & spring compressors.
@SnailTrail4x4
@SnailTrail4x4 Год назад
That's a good suggestion,I've done that before and honestly didnt feel like it made much of a difference. But maybe I didn't turn it enough
@P90X4Lizer
@P90X4Lizer 3 года назад
Very informative! Would you recommend install a front differential drop kit with this setup? Thanks!
@SnailTrail4x4
@SnailTrail4x4 3 года назад
I advise anyone going 3" or above to do a diff drop.
@P90X4Lizer
@P90X4Lizer 3 года назад
@@SnailTrail4x4 thank you
@JPJamster
@JPJamster 3 года назад
@@SnailTrail4x4 newbie here, what is a diff drop and why is it needs for lifts 3" and above?
@warweaponx6629
@warweaponx6629 2 года назад
@@JPJamster To remove stress off of the CV’s so they are better aligned.
@dat1dsm
@dat1dsm Год назад
How much lift did you get out of those front coilovers. Noticed they don't have much or any preload on them. Thanks
@Nightmarehc130
@Nightmarehc130 3 года назад
did you get the stardard stock or the custom size? I need to up grade my 2019 suspension. I have drawers and freezer installed...I think I'll need the upgraded springs as well...
@SnailTrail4x4
@SnailTrail4x4 3 года назад
I'd say yes, especially if you're going to add a bumper
@M4runner13
@M4runner13 3 года назад
Do you know if the 3” left is only possible with the KINGS when having a KDSS or can you get that 3” lift with say FOX 2.5 as well?
@ShockSurplus
@ShockSurplus Год назад
You can get 3" of lift out of the Fox 2.5 setups as well
@jimsonaranda2512
@jimsonaranda2512 Год назад
is this coilovers pre set to 2inch lift out of the box?and how many turns to make it 3knch lift?
@margehernandez9902
@margehernandez9902 3 месяца назад
How many turns for 3” height? Thank you
@98supraman
@98supraman 9 месяцев назад
How much lift does it give you without adjusting the preload?
@haneulhwang194
@haneulhwang194 3 года назад
the way you install it is way different from how most people do it? did you put the car in 4low or did u even loosen any of the kdss brackets? and the rear seems like u just took the shock out and just used like a jack to separate the springs? i really want to know ur way seems like a good better easier way mahalo from hawaii!
@SnailTrail4x4
@SnailTrail4x4 3 года назад
We didn't put the car in 4low or loosen any of the KDSS brackets. The Runner has been in 4low since the video and had a complete wheel alignment. As for the rear we removed the old shocks, used the bottle jack to remove the old springs, and when we installed the new springs I used coil compressors and the bottle jack.
@haneulhwang194
@haneulhwang194 3 года назад
@@SnailTrail4x4 wow thanks alot! i might try ur way i saw ur old video so im guessing u found a better way!
@ochirokobay4113
@ochirokobay4113 2 года назад
How many inch of your rear spring? 2.5” or 3”?
@ds10wtf71
@ds10wtf71 3 года назад
Hey. You show the driver side. But, curious what you did on the passenger side front with the KDSS. Did you detach the KDSS sway bar on the pass side or just push down on it with a block to remove the coilover and re-install it?
@SnailTrail4x4
@SnailTrail4x4 3 года назад
I did the same on both sides, didn't need to remove the KDSS at all
@ds10wtf71
@ds10wtf71 3 года назад
@@SnailTrail4x4 Thanks! I've been detaching the KDSS on the pass side to take off the coilovers on that side. I didn't this last time and just used a pry bar and some wood blocks to make some space to get it back on. Not sure I"m doing it the best way, but saved some hassle. Appreciate your videos and response!
@blazinhott112
@blazinhott112 3 года назад
Just put a toytec lift in my 19’ 4runner. Install went well. Now I’m chasing a rear end clunk when going over bumps at slow speeds. Any ideas?
@SnailTrail4x4
@SnailTrail4x4 3 года назад
Is your panhard bar hitting your sway bar?
@arizonacolour8793
@arizonacolour8793 День назад
Does King not make shocks for F150s or any Ford vehicle??? I dont see any videos w said cars
@Reverend1776
@Reverend1776 3 года назад
I'm curious as to why the reservoir bracket is so different from my King OEM lift?
@SnailTrail4x4
@SnailTrail4x4 3 года назад
Just a different kit I guess
@science999
@science999 3 года назад
End results please brother
@barrybadgernath1703
@barrybadgernath1703 3 года назад
Did y’all install a differential drop kit as well? Do you recommend it?
@SnailTrail4x4
@SnailTrail4x4 3 года назад
We didn't at that time, but one was installed later.
@ethanwong9950
@ethanwong9950 3 года назад
Does the kdss end up hitting the front reservoirs when going through their range of motion?
@SnailTrail4x4
@SnailTrail4x4 3 года назад
Not that we have seen
@demobiker1
@demobiker1 2 года назад
Did you do anything about the kdss? Did you experience any lean after install?
@SnailTrail4x4
@SnailTrail4x4 2 года назад
Nope, and maybe slightly but not very noticeable
@dhubbs4
@dhubbs4 3 года назад
Can we see the after? Hard to tell from a single clip that gets quickly covered up
@SnailTrail4x4
@SnailTrail4x4 3 года назад
What do you wanna see?
@dhubbs4
@dhubbs4 3 года назад
SnailTrail4x4 amount of lift...stance...you know...”the goods”! Lol
@eddiesorianog
@eddiesorianog 2 года назад
Did have to touch the kdss system? Did you have to do any to correct the lean? Do kings come already to the 3 inch height?
@SnailTrail4x4
@SnailTrail4x4 2 года назад
These kings were preset to the height. And no we didn't need to adjust the kdss
@kaelyaniep4267
@kaelyaniep4267 2 года назад
If im not replacing the UCA arm do I still need to remove it to get the strut off or can I just unbolt the ball joint?
@SnailTrail4x4
@SnailTrail4x4 2 года назад
You can just unbolt the ball joint, no need to completely remove it
@BP-uj9uq
@BP-uj9uq 2 года назад
You need a set of ratchet wrenches!
@zenofthemoment
@zenofthemoment Год назад
What makes Kings better than Icons?
@White_buffalo_4r
@White_buffalo_4r 3 года назад
So question do you suggest or recommend someone do the rear panhard and rear trailing arms when doing the lift in the rear as well?
@overlandperu6084
@overlandperu6084 3 года назад
I do have it installed to correct the rear axle . I have a OME 2.5 inch lift .
@SnailTrail4x4
@SnailTrail4x4 3 года назад
It really depends on how high you're going to go. Over 2.5 I would change the panhard bar, 3+ I would start looking into getting trailing arms
@White_buffalo_4r
@White_buffalo_4r 3 года назад
@@SnailTrail4x4 going around 2 to 2.5 in the rear so sounds like I like I should be ok.
@viewoptic
@viewoptic 3 года назад
Are these the OEM replacement shocks? or custom built?
@SnailTrail4x4
@SnailTrail4x4 3 года назад
Custom, they are taller
@atroche1978
@atroche1978 2 года назад
I always torque everything down to TAF! 😂
@SnailTrail4x4
@SnailTrail4x4 2 года назад
What's TAF?
@LionRunner
@LionRunner 3 года назад
Yikes..!! Hope this video won't regret my choice of ordering Elka 2.5 remote res over Kings. I was told that the Elka would be more comfortable than kings and has both high speed and slow speed adjust ability vs only one in Kings. (I still have time to cancel my order though. Will see after this video..)
@SnailTrail4x4
@SnailTrail4x4 3 года назад
To be honest, I have never heard of Elka. I'd be interested to hear your thoughts on them if you get them.
@LionRunner
@LionRunner 3 года назад
@@SnailTrail4x4 yeah. So far no videos on RU-vid for 4Runner. Definitely will share a video after its install. But its a loong wait time until the shop get them.. :(
@White_buffalo_4r
@White_buffalo_4r 3 года назад
@@LionRunner I've heard from several people say that Elka is an amazing brand
@LionRunner
@LionRunner 3 года назад
@@White_buffalo_4r after 5 month finally I got the ELKAs. Dropping my 4Runner tonight for the install. I will get it back after few days. Will definitely share the feedback.. :-)
@ClimbAClassic
@ClimbAClassic 2 года назад
How did elka work out for you?
@ST-zc7tn
@ST-zc7tn 3 года назад
Looks like your 4runner have KDSS, doesn't that limit the lift height?
@SnailTrail4x4
@SnailTrail4x4 3 года назад
Not to our experience, what limits the lift height is the UCA angles
@devildog1168
@devildog1168 3 года назад
Will this kit fit a 21’ 4runner sr5 premium ??. This video is the most recent putting on a lift kit.
@SnailTrail4x4
@SnailTrail4x4 3 года назад
Yeah, it should!
@devildog1168
@devildog1168 3 года назад
@@SnailTrail4x4 okay because I just got one two weeks ago. And I have yet to see 21’ sr5 premium lifted where I am from
@christophermika6655
@christophermika6655 2 года назад
is there much of a difference between doing the same lift but for a 4th gen? Thanks!
@ShockSurplus
@ShockSurplus Год назад
no difference at all really
@thomaskoemel
@thomaskoemel 2 года назад
What keeps the bottle jack from slipping off the axle?
@SnailTrail4x4
@SnailTrail4x4 2 года назад
A solid placement, and pressure
@joelramos6254
@joelramos6254 2 года назад
Did the toytech spacer come with the rear king suspension?
@SnailTrail4x4
@SnailTrail4x4 2 года назад
I don't recall a spacer being installed on the rear of this project. If there was one it was probably part of the overall kit from the business
@Steezy.gunz_
@Steezy.gunz_ 2 года назад
Wouldn’t u want that reservoir hose on the outside not under the uca ?
@SnailTrail4x4
@SnailTrail4x4 2 года назад
As long as it's not getting pinched then you will be fine
@00SingleSeven
@00SingleSeven 3 года назад
Is alignment necessary? What if I don't remove the uca to install only the spacers?
@jaredsmith6109
@jaredsmith6109 3 года назад
Yeah because whenever you raise a vehicle your wheels get positive camber at the very least. Negative camber if you lower it. It’s always recommended to get an alignment done everytime you do any sort of suspension modification/replacement.
@SnailTrail4x4
@SnailTrail4x4 3 года назад
Yes, Jared is correct
@00SingleSeven
@00SingleSeven 3 года назад
👍🍻
@ajentink85
@ajentink85 3 года назад
What was the lift of the rear springs?
@SnailTrail4x4
@SnailTrail4x4 3 года назад
It was a 2.5" lift, the front was 3"
@michaelrutledge4820
@michaelrutledge4820 3 года назад
I understand that it’s more of an instructional video, but I would like to see a better showcasing of the end result.
@SnailTrail4x4
@SnailTrail4x4 3 года назад
What would you like to see?
@michaelrutledge4820
@michaelrutledge4820 3 года назад
SnailTrail4x4 a before and after side shot and maybe some measurements. Don’t get me wrong, I liked the video.
@SnailTrail4x4
@SnailTrail4x4 3 года назад
@@michaelrutledge4820 -- No, no, I appreciate your feedback and help. I was thinking after you said this that I could have a video before and after of it driving over bumps
@bigcountry9457
@bigcountry9457 3 года назад
@@SnailTrail4x4 that would be awesome and much appreciated SnailTrail4x4!
@FrenchHawk878
@FrenchHawk878 3 года назад
This is an install with a 4runner that has the kdss. How does this differ if you don't have kdss?
@SnailTrail4x4
@SnailTrail4x4 3 года назад
The major difference between KDSS and Non is the sway bars. You will have more flex without KDSS
@ShockSurplus
@ShockSurplus Год назад
King has KDSS specific part numbers with longer reservoir hoses
@jeffreymcdonald8267
@jeffreymcdonald8267 3 года назад
King vs OME, who wins and why ? Thanks.
@SnailTrail4x4
@SnailTrail4x4 3 года назад
It really depends on what you want. If you want a go fast race set up shock, I'd get kings. If your looking for something that is more daily friendly, OME
@jeffreymcdonald8267
@jeffreymcdonald8267 3 года назад
@@SnailTrail4x4 Thats what I figured. Thanks bud
@dad3562
@dad3562 3 года назад
So did you set it to 3 inches or does it provide 3 inches?
@SnailTrail4x4
@SnailTrail4x4 3 года назад
They came set up as a 3 in lift
@dad3562
@dad3562 3 года назад
@@SnailTrail4x4 you lucky dog!
@carloshereaud5463
@carloshereaud5463 3 года назад
Donu have a link for the control arms?
@SnailTrail4x4
@SnailTrail4x4 3 года назад
www.spcalignment.com/spc-performance
@ShockSurplus
@ShockSurplus Год назад
www.shocksurplus.com/products/specialty-spc-adjustable-control-arm-kit-25480
@RohitSharma-tb6mq
@RohitSharma-tb6mq Год назад
Are they orovide the same at India?
@misterxkato
@misterxkato 2 года назад
So you never had to do anything with the KDSS sway bar?
@misterxkato
@misterxkato 2 года назад
or remove the skid plate?
@SnailTrail4x4
@SnailTrail4x4 2 года назад
Nope leave them both
@warweaponx6629
@warweaponx6629 2 года назад
@@SnailTrail4x4 Is this true for non-kdss 4Runners as well? No sway bar relocation needed with this kit?
@SnailTrail4x4
@SnailTrail4x4 2 года назад
@@warweaponx6629 -- we didn't, but that's not saying it's the best... It might be a bit firm, I relocated the sway bar on my Bilstein kit
@warweaponx6629
@warweaponx6629 2 года назад
@@SnailTrail4x4 Thanks for the response! Is it normal to add spacers on the radiator support brackets after the sway bar relocate? Shop that did my icon install did this.
@skiptonmcphee1669
@skiptonmcphee1669 3 года назад
How much does this system cost???
@SnailTrail4x4
@SnailTrail4x4 3 года назад
Link in the description
@schaptai1963
@schaptai1963 3 года назад
👍👍👍🚘
@jeffreymcdonald8267
@jeffreymcdonald8267 3 года назад
Nothing to address the notorious driver side lean of the 4runner ??
@ShockSurplus
@ShockSurplus Год назад
I think King presets the driver side different than passenger side to account for the lean. If the vehicle has KDSS, then it automatically addresses the lean
@jeffreymcdonald8267
@jeffreymcdonald8267 Год назад
@@ShockSurplus No offense sir, but "I think" is no better than "I assume". And we all know how that story usually ends. Facts rule.
@ciredeezle
@ciredeezle 2 года назад
I know it’s dumb but i wish they came in other options other than blue lol
@SnailTrail4x4
@SnailTrail4x4 2 года назад
They do, I know they have a black option
@CrazyGreek80
@CrazyGreek80 3 года назад
Good review besides the music.
@SnailTrail4x4
@SnailTrail4x4 3 года назад
What music would you like?
@CrazyGreek80
@CrazyGreek80 3 года назад
@@SnailTrail4x4 none. But its your vid.
@SnailTrail4x4
@SnailTrail4x4 3 года назад
@@CrazyGreek80 -- Thanks for you're honesty. When I add music people complain, and when there isn't any music people complain. There is no winning
@jvogler_art4708
@jvogler_art4708 2 года назад
Can’t even see the end result cause of those icons.
@freedomfighter2911
@freedomfighter2911 2 года назад
What could the average Joe paying his local mechanic, expect to pay for this complete install? Thanks
@ShockSurplus
@ShockSurplus Год назад
The shocks themselves run about $2800 for front and rear. Install is about 5hrs give or take, about $600-800 for labor depending on where you live
@ThePolaris2
@ThePolaris2 3 года назад
Torque specs dont matter on suspension. Over my 10 years of a suspension tech you have no idea how much bad shit ive seen happen because it was ^torqued to spec^
@SnailTrail4x4
@SnailTrail4x4 3 года назад
There is one thing to just hammer the parts on and its another to do it correctly. The majority of people watching my videos are not trained mechanics and they need to know how tight is tight.
@cjstew75
@cjstew75 4 месяца назад
I hate it when mechanics call coil over shocks struts. There’s a difference. I’m at Canix should know the difference. Sounds like a backyard mechanic.
@lostagain2992
@lostagain2992 2 года назад
Thumbs down for no before/after pics. For that matter any pics👎
@armondhammer9
@armondhammer9 Год назад
Dude i was cringing when you were sticking your fingers in the spring with it compressed... yikes. baaaad idea..
@dunnoyolo2238
@dunnoyolo2238 5 месяцев назад
So kit was $1805 with all options you have or what are the prices ?
@dunnoyolo2238
@dunnoyolo2238 5 месяцев назад
Lift kits on these Toyota's are easy unless they are super rusty.
Далее
New 4Runner Lift Kit | Old Man Emu BP-51
19:53
Просмотров 95 тыс.
What is the Best Lift Kit for Your 4Runner?
3:15
Просмотров 24 тыс.
CHANGE 4runner shock WITHOUT Spring Compressor tool???
31:07
Modifications I USE that I should have bought FIRST
18:22
4Runner Bilstein 5100 Front Shock Install
24:02
Просмотров 140 тыс.
IT S SUPRAAA 🔱💪🔱 إنها السوبرا
0:12