Kioti Backhoe vs tree stump round 2!!! It's a beast! 

Thanks, Keith! We’re still hanging around. I’ll put it this way, I had roughly nine months to get a bunch of work done on the inside of the house and filming and editing videos just wasn’t in the cards. Once I get caught back up on my sleep I’ll see if I can get some videos going again.

Good idea! I’ll have to give that a try!

Thanks for the tip! The backhoe although was an expensive attachment, it's one of my most used!

Thanks! This time went much better than the last go at it. No check engine light!

Surprisingly, per the manual, it actually says not to lift the wheels off the ground. Weird I know. I think they want them there more for tip over support rather than large outriggers like a actual backhoe where you do lift the tires up. Learning curve for me with always seeing machines with outriggers lifted off the ground. I do plan to add some cleats to the pads though. Future video!

@@Curtis1824 My "kubogy" MX5200 TLB ( very similar in size) " loves" to be "jacked up & planted". I lift the front-end up 98% with the loader bucket "knifed in" back curled in. The 68 ( yes sixty-eight) 15mm bolts hold & "unitise" the backhoe-loader to the tractor VERY WELL. The backhoe is Tremendously Strong with 925hours of Excelent service--thats WHY l went with the "kubogy system "; never met a stump it couldn't handle,= poor thing has almost been tortured! By "cleating" the stabilizers & "planting-knifeing in" the loader bucket the " jukeing,sliding,& skidding around are 99% eliminated. There is no such thing as the "best tractor" just one that is PAID for and has given impeccable service for the long-haul with 3000-plus hours. By having 4 tractors ( blessed) l can find the right one for the rite job. Good to see you got ALL the " kinks werked out" of your tractor rig. May l suggest; get another little helper like a CK3510SE open-station tractor T&L only.Thank you Sir for the Excelent vidio and happy safe tractoring ( boy you have lots of work to do).Best wishes with all your endeavours.

Ripper tooth would definitely make it easier! That would be a fun build. Do you think the steel on the bucket is thick enough to handle the stress?

Ripper is nice , I purchased the tooth for the 3510 we have and it cuts right through the roots no problem

I know, got pretty close! Thankfully no damage! That's all I need now is another repair!

Hi Derek, I can do that in a future video no problem!

Hi Don, I’ll try and do that. I also have all the info for everything I use down in the description of each video. Thanks for watching!

Oh yea ; WE ARE in the DARK.

Thanks! It’s a 60hp tractor.

Stumps are hard to grab! I think this one had one last root I needed to break. They are an expensive attachment, but so far I’m very impressed with it. For what I’m using it for, it’s a lot cheaper than a standalone excavator!