No video :(

Kirby Heritage II Vacuum Belt Replacement - How To Do It Yourself - Repair / Replace

Подписаться 363

Просмотров 21 тыс.

50% 1

Video showing the process on replacing / repairing a belt on a Kirby Heritage II Vacuum. Step by Step How To Video to guide you through the process.
You Can Do It specializes in all things DIY for the outdoors, indoors and all things inbetween. Great projects and How To's.
Helpful links
Featured items from video
Official Kirby Vacuum Belts - amzn.to/2LscuPP
Tools used
NONE
Our technical gear
Camera - amzn.to/2LssXUe
Laptop - amzn.to/2NaE06x
Editing Software - FREE Hit Film Express
Tripod - amzn.to/2Ludovv
Memory Card - amzn.to/2I3bwYd
Flash Drive - amzn.to/2LqxbLY
Some links are Affiliate links and we recieve a small snipit if you buy any of these products, and that goes into making this channel grow. Prices are not affected for your purchase.
Thanks for taking the time to watch our video and check out all of our other content. Subscribe, share with your friends and leave a comment we would love to hear from you.

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 15

@Makeuptootzy 4 года назад

Holy hell, my recently passed grandmother had a 1976 Kirby passed to me I figured the new belt and I had to purchase an agitator works great!

@richnoe9072 6 лет назад

I was slightly fearing this job but your video made the job a walk in the park. Thanks for all the help buddy!

@pixiemermaid 6 лет назад

This video is exactly what i needed. I just bought a used kirby heritage 2 legend 1984-1988 model. I wondered what those side screws were for. I appreciate this video. It helped me to understand my new (pre owned) kirby.

@VintageGentleman1947 Год назад

Heritage 2?! That’s a legend 2.

@GetHealthyWithZ 3 года назад

Thank you!!!

@drtimoshea4087 3 года назад

this sucks--- the trick is hooking the belt again -- which he glosses over

@gweezerus Год назад

Kinda, but at 6:10 you see that you have turn it counter-clockwise again (after resetting) to hook the belt. I also had to use more muscle than I expected to get enough rotation so the belt cleared the shaft. Anyway, liked and subscribed just for this video.

@flippy6744 3 года назад

Hello ive tryed this on my legend 2 and the front bit u turn (this is once the belt is on) it doesnt go all the way

@chandlerclanmama 4 года назад

information was good, but, was disappointed everything he was doing was out of the camera view. The camera was focused on the body of the machine where he took the front part off.

@GEORGEMONTEVERDE 5 лет назад

Thank you for the video... Can you please tell me what belt number to use? I have the 301291 but it keeps breaking or being cut by the tension relief bar. Thank you!!

@janetardin9484 6 лет назад

does it matter which side the white end goes?

@ClassicTVMan1981X 6 лет назад

The side of the brush roll with the white cap must face the side of the machine where the toe-touch control is. The brush roll will only properly fit in that way!

@lauriemacquanan2141 5 лет назад

How can I tell if the bearings are worn out??

@mattjones7621 3 года назад

If you mean in the motor, it will make a grinding sound similar to a circular saw. When you stop the motor, and spin the fan shaft, it will sound rough when you spin it. In the roller brush, it will grind or feel gritty when you move or spin the brush. Some roller brushes have a long axle with bushings in it. Sometimes it will lock up or it will make a growling noise when in motion. All of those things can be easily fixed or replaced.