Тёмный
No video :(

KIRBY VACUUM REPAIR :NEUTRAL DRIVE PEDAL FELL OFF HOW TO FIX 

Kirby Enthusiast
Подписаться 11 тыс.
Просмотров 28 тыс.
50% 1

KIRBY VACUUM:KIRBY AVALIR TECH DRIVE PEDAL SPLINE REPAIR MEASUREMENTS DIY
LINKS:
(some of the links below may be affiliate links)
teespring.com/....
Sentria / Avalir Belt Lifter amzn.to/3cGR5N6
Kirby USA Hose End Suction Blower, color black amzn.to/3jnXUHK
Kirby USA Vacuum Tools Attachment Hose, Grey amzn.to/2SbdeLS
Genuine USA G6 Kirby Vacuum Cleaner Swivel End amzn.to/3l3hgSV
Kirby USA PET HAIR BRUSH ROLL amzn.to/3d0vW2d
Kirby UK 6 Pack Bags amzn.to/372KmNR
Kirby UK F Style Top Adaptor amzn.to/373wIde
Kirby UK PET Owners SHAMPOO amzn.to/3rMh8KK
Kirby UK Brush Roll amzn.to/2OjRH4S
DISCLAIMER: Links included in this description may be affiliate links.
If you purchase a product or service with the links that i provide, i may receive a small commission. There is no additional charge to you!
I appreciate the support for my channel so i can continue to provide you with free content.
In this video i will show you how i get the Kirby pedal assembly back to the exact position to work properly when it has fell out of you Kirby vacuum or Kirby Avalir
This is a common problem with the Kirby vacuum transmission pedal assembly falling and broken
This is the Kirby Enthusiast channel, the only dedicated Kirby owners channel on RU-vid.
On my channel i do Kirby vacuum repairs, Kirby Vacuum demonstrations of the Kirby vacuum floor mop, the Kirby avalir shampoo system.
I share known Kirby vacuum secrets of easy DIY repairs.
The Kirby Vacuum has been sold door to door for over 100 years.
The Kirby vacuum is as good today as is has been for over 100 yrs.
In my opinion the best vacuum of 2020 is a new Kirby avalir 2.
With all the accessories ranging from the following.
Kirby avalir portable shampooer
Kirby avalir 2 shampoo system
The Kirby avalir 2 hard floor mop attachment
the Kirby Avalir 2 tile and grout attachment.
Welcome to my channel Kirby Enthusiast, this is the only dedicated Kirby Owners channel on you tube.
Dedicated to sharing knowledge that will save you time and money and help you get the most out of your Kirby Vacuum.
Welcome to the Kirby Enthusiast You[Tube channel.
This is the place for all your Kirby Vacuum demonstrations.
On this channel do Kirby vacuum demonstrations , from demonstrating how to take apart your Kirby vacuum and clean to as good as the day it came out of the Kirby vacuum company factory.
Ready to reassemble in a Kirby Enthusiast video.
To shampoo demonstrations to money saving tips to get the most out of your new Kirby Avalir 2 in 2020.
Whether you have just had a Kirby vacuum demonstration and bought your new Kirby vacuum in 2020.
Or if you have owned your Kirby vacuum for years or bought a 2nd hand Kirby vacuum off your local marketplace.
You know in my opinion own the best vacuum of 2020.
The question are Kirby vacuums worth it or are Kirby vacuums worth the money, will be answered.
Whether you are a new Kirby owner or have owned an Kirby Avalir 2 from new.
As you Know the Kirby Vacuums has been sold door to door for over 100 yrs by the Kirby company.
The best way to see all the benefits of a Kirby avalir 2 or other Kirby vacuums is in a Kirby vacuum demonstration.
The Kirby home cleaning system is 2nd to none and cant be bought new in stores across the UK or Europe . So the only way to see the benefits of owning such a great and successful home care system is in your own home by watching a Kirby vacuum demonstration from a door to door salesmen.
The purpose of my channel is to share all the Kirby vacuum tips and tricks.
Demonstrating the deep cleaning power of the Kirby Avalir 2 and other Kirby Vacuum right back to the Kirby Legend 2 or the Kirby Heritage 2.
The Kirby Avalir 2 isn't just and upright vacuum.
It is in my opinion the best vacuum cleaner of 2020 and beyond.
The Kirby Avalir 2 is capable of deep cleaning mattress with the Kirby deep cleaning portable.
This will show you how to deep clean your mattress and how to remove dust mites and bed bugs from your bed and home for good.
The Kirby home-care system is a complete home care system that comes with the following.
The Kirby Portable shampoo system that you can use to clean your curtains and dry clean your couch.
Saving you money on new furnishing in your home over many years.
The best Kirby vacuum accessory in my opinion in 2020 is the new Kirby shampoo system.
The Kirby shampoo system has come on leaps and bounds over the years with the Kirby company improvements with each Kirby Vacuum .
The Kirby shampoo system can not only dry clean your carpets saving you money on carpet cleaning.
It now has a Kirby hard floor mop system that can mop your wooden or tiled floors.
It had a Kirby tile and grout cleaning system, bring those tiled floors and grout looking new again.
#kirbyenthusiast #kirbyavalir #kirbyhardfloorsystem #kirbybeltlifter #kirbylegends #kirbylegend2 #kirbyvacuum #kirbytechdrive #kirbytransmission

Опубликовано:

 

22 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 61   
@geordonp
@geordonp 3 месяца назад
You are the man! I had the drive pedal out but didn't know how to realign the assembly on the splines. Using the combo-square to 1/4" (6mm) was brilliant. It slid right on without using force. Thank you for the clear instructions.
@KirbyEnthusiast
@KirbyEnthusiast 3 месяца назад
So glad I could help thanks for awesome comment and support of my channel. If you’d like to buy me a coffee use $uper Thank$ button below video. Thanks again for supporting my channel. 👍🔔
@stevecrounse1789
@stevecrounse1789 4 месяца назад
Thank you for trying to explain it. Thank you for actually using rulers and measurements. Thank you for having good camera angles. Thank you for getting to the point. Great video!
@KirbyEnthusiast
@KirbyEnthusiast 4 месяца назад
Your welcome, thankyou for awesome comment and support of my channel really appreciated 👍🔔
@williesanchez9302
@williesanchez9302 5 месяцев назад
That’s was awesome. Once you made me aware of the that little round circle the splines slid right in. Thank you. You saved quite a headache
@KirbyEnthusiast
@KirbyEnthusiast 5 месяцев назад
So glad I could help and finally reaching more Kirby owners across the world to make using Kirby more simpler and save owner ££££ on repairs and maintenance. 👍🔔
@busaj383
@busaj383 3 года назад
Nice video! I bought my Kirby over 20 year ago this was the first issue I ever had with the unit. Happy to know it was easy enough to fix even tho they should had designed it better to not happen. Thanks for helping me get the pile of parts I had sitting on my counter all back inside and working 👍🏻
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Your welcome , so glad my channel is helping so many Kirby owners. Thankyou for watching and support of my channel 👍👍 🔔
@Syeico
@Syeico Месяц назад
Dudes got the london look 🤓 a kerrbi
@graysonsvacsandmowers5426
@graysonsvacsandmowers5426 2 года назад
Thanks for the video, this helped me replace the switch to my G5, I just recently put a new transmission in it, but hated the way it looked with the G6 pedal and wheels. So I basically swapped the wheels and switch to the new one, and it looks original and has a virtually silent trans.
@KirbyEnthusiast
@KirbyEnthusiast 2 года назад
So glad I could help , really appreciate support . I put Avalir trans in my g4 made it a lot smoother
@Homepage.
@Homepage. 3 года назад
YOU JUST SAVED MY AUNTS G7 diamond Edition THANK YOU THANK YOU THANK YOU
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Your welcome thankyou for supporting my channel it’s really appreciated, please share with friends and family so I can reach all Kirby owners worldwide 👍👍
@brendazabriskie6246
@brendazabriskie6246 2 года назад
Thank you. I'll wait for your next video before I tear it apart again.
@davidbenton8842
@davidbenton8842 3 года назад
Mine fell off and I thought I'd have to buy the entire assembly before I saw your video. However, since yours already had the arm on the shaft, I didn't find the separation washer that goes on the shaft between the frame and the arm, so I had to take it back apart and follow your great instructions twice!
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Your welcome so glad my videos are helping to save Kirby owners $$$$ thankyou for your support of my channel 👍 🛎
@geordonp
@geordonp 2 месяца назад
Thanks!
@KirbyEnthusiast
@KirbyEnthusiast 2 месяца назад
Thankyou really appreciate support, means a lot . Helps me continue to make free content 👍👍
@grahamewray8146
@grahamewray8146 2 года назад
Hi thanks for help thus far. Ran new brushes to try & run them in & remedy arcing but result was brushes wire right down & kirby stopped altogether. Brushes were genuine kirby parts but I noticed one was 4w & one 7w. Will try upload photo. Help appreciated.
@Be22ThePig
@Be22ThePig Год назад
Just used your videos to repair the mother in laws G6 great help thank you.
@KirbyEnthusiast
@KirbyEnthusiast Год назад
So glad I could help thank$ for awesome comment and support of my channel 👍👍
@ronaldstrik
@ronaldstrik 3 года назад
Good instructions to fix this.
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Thanks Buddy hoping this helps slot of Kirby owners 👍👍
@FeosBG
@FeosBG Год назад
Thank you very much! I fixed the damn thing with some epoxy resin glue and a liquid plastic. I hope it will never fall out again. ~ Kind regards ~
@KirbyEnthusiast
@KirbyEnthusiast Год назад
Glad I could help , I’ve been fixing these this way for over 3 yrs and never had one fall out on mine or friends ever again . It’s a issue kirby need to resolve really
@DavidStirneman
@DavidStirneman Год назад
Very much appreciated!
@KirbyEnthusiast
@KirbyEnthusiast Год назад
Glad i could help , thanks for great comment and support 👍🔔
@duanehovenga2965
@duanehovenga2965 3 года назад
I could not do that with mine it was all rusted out.. But if mine ever does that i will do that. Great info...
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Your welcome thankyou for continued support 😀😀
@user-pr6zm1lc7j
@user-pr6zm1lc7j 3 года назад
Thanks man, it works!!!
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Your very welcome 👍🛎
@hendiep227
@hendiep227 3 года назад
Thank you for your work. Saves me a ton of misery.
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Your welcome, glad I could help . Thankyou for watching and support 👍🔔
@petsrule5198
@petsrule5198 3 года назад
Sorry I'm late but it's a realy Good video 👍
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Thankyou you continued support it much appreciated😀😀
@paulwindler3040
@paulwindler3040 3 года назад
Great info.
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Thankyou for supporting my content , make sure to thumbs up as helps me with RU-vid algorithm and ding 🛎 not to miss new uploads . 👍👍
@nanraaf9823
@nanraaf9823 2 года назад
Nice explanation but I don't know what kind of screwdriver to use to get the back of the vacuum off to begin the process.
@KirbyEnthusiast
@KirbyEnthusiast 2 года назад
It’s a torx 20 , hope this helps 👍🛎
@beverlybeauford7412
@beverlybeauford7412 Год назад
It seems to be able to push easier with the Drive and Neutral Pedal off....Is it safe to continue to use the kirby vacuum without the pedal on?
@KirbyEnthusiast
@KirbyEnthusiast Год назад
It’s , safe though you will at some point push the Kirby while turned off and cause more damage to the tech drive or motor .
@kanashipanda
@kanashipanda 3 года назад
How do I put it back on
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Check out my other tech drive pedal repair video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-iKt87RUaJmA.html
@spacecruisers
@spacecruisers Год назад
Hey, I replaced the switch on my mother in laws unit but the problem I’m having now is when you shift it into drive it just takes off 😂 and it won’t let you pull it back! My mother in law said she should be able to vacuum forward and back with it in drive? I asked if she could just use it in neutral but she said it’s too hard to push. I have no prior experience with the vacuum and how it’s “supposed” to work…
@KirbyEnthusiast
@KirbyEnthusiast Год назад
So glad I was able to help you fix your Kirby switch and save on repairs . This may be the cause of your problem with the Kirby shooting forward . Let me know how you go ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zgW2gPhmrEo.html
@lindasanders1068
@lindasanders1068 Год назад
I've been all over trying to find the drive neutral switch on my Kirby 84 I just got it secondhand and it didn't come with the manual and it's not wanting to roll forward whenever I'm vacuuming unless I put it on the very highest deal and then it's too high
@KirbyEnthusiast
@KirbyEnthusiast Год назад
There is no tech drive on a Kirby 84 , the tech drive didn’t get fitted to Kirby until, the Kirby Generation starting with the G3 in 1991. The 84 is hard to push due to airflow . When you lower down , lower until tone changes then 1click more. Never lower all the way down on pile carpet at that will be too low . Hope this helps 👍🛎 not to miss new tutorials 👍👍
@busaj383
@busaj383 3 года назад
Question for you after putting it all back together... it does not power up now? Push the Power button down and nothing. Is there a safety switch or button I forgot to plug in? I thought the power power "clicked" before, now it just goes in/ out with no notable change. Do I need the power switch now?
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
There a metal baron the right that connects from the switch to the pedal you haven’t put it back in. It’s a orange hook it should clip into that then in the little lug on the switch
@busaj383
@busaj383 3 года назад
@@KirbyEnthusiast I had that all hooked up and it did not turn on, but after putting in the other 3 screws in the front and the 2 in the bottom, that did not need to be removed for what I did today... plus the handle and bag too, hit the power button and it fired up! Can't explain it, maybe one of those grounds something I can't see, don't know, but it is working now :) Even tho I was slightly off with the lever and it hits the rear cover so I left the screw loose in the back, will mess with it again another day. Thanks again
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
@@busaj383 your welcome thanks for support 👍👍🔔
@geordonp
@geordonp 3 месяца назад
@@busaj383That happened to me trying to turn on without putting all together. There is a kill switch on the bag attachment.
@brendazabriskie6246
@brendazabriskie6246 2 года назад
I followed your instructions but now when I turn it on it goes backwards. Any thoughts as to what I did wrong?
@KirbyEnthusiast
@KirbyEnthusiast 2 года назад
Just check you have put the tech drive on the front fork when refitting the top. Common mistake. I will try and upload video this wknd explaining this problem
@randomvids5883
@randomvids5883 2 года назад
So I just did this, but now my Kirby is making a high pitched noise….What should I do?
@KirbyEnthusiast
@KirbyEnthusiast 2 года назад
Is it when tech drive is activated or from the belt and spindle ??. Can you post a video in the my Facebook group so I can get a better idea to diagnose
@marlaparham99
@marlaparham99 3 года назад
I took my Kirby apart to fix the peddle as the video show put it back together it not working I have the transmission in the hook the belt on and still no sound what is wrong
@KirbyEnthusiast
@KirbyEnthusiast 3 года назад
Do you mean it’s not turning on now ??
@ceewhy1
@ceewhy1 Год назад
what if the pedal fell out and its put back together but it goes in reverse
@KirbyEnthusiast
@KirbyEnthusiast Год назад
You haven’t put it back on spline correctly
@ceewhy1
@ceewhy1 Год назад
@@KirbyEnthusiast thank you for the response, i’ll let my brother know!
Далее
Девочки, у вас тоже так? 💅🏻✨
00:17
МЕГА МЕЛКОВЫЙ СЕКРЕТ
00:46
Просмотров 473 тыс.
KIRBY VACUUM REPAIR NEUTRAL DRIVE PEDAL HOW TO FIX
8:36
KIRBY AVALIR TECH DRIVE PROBLEMS: 3 REASONS WHY
17:52
Fix Your Kirby Drive Pedal Three Ways
10:08
Просмотров 38 тыс.
Replacing the Kirby Foot switch off on
10:59
Просмотров 6 тыс.
Девочки, у вас тоже так? 💅🏻✨
00:17