Klein tools non-contact voltage tester NVCT-2P NCVT-3P review

Подписаться 11 тыс.

Просмотров 20 тыс.

50% 1

We take a look at the klein tool non contact voltage testers.
NVCT-2p and NCVT-3p are very similar but the 3p has additional features such as a flashlight.
Both are great tools and seem to work properly. Have had no issues so far. Pretty much has a high sensitivity mode and a low sensitivity mode. Can also work in silent mode.
When using something like a non contact voltage tester make sure you get something that is absolutely reliable. Your life may depend on it.
NCVT-2p
Non contact voltage tester's dual-range capabilities allow tester to detect from 12 to 1000 V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
Electrical voltage tester detects voltage with simultaneous visual and audible indicators
Non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems
Green light indicates no voltage
Lightweight, compact tool with pocket clip provides convenient storage and quick access
Auto power-off feature conserves and extends battery life
CAT IV 1000 V rating provides expanded operation and protection
Screw-thread battery cap with O-ring ensures protection against dust and water ingress
6.6-Foot (2 m) drop protection
IP54: Dustproof and waterproof
NCVT-3p
Non contact voltage tester's dual-range detects from 12 to 1000 VAC or 70 to 1000 VAC for a broad variety of low-voltage or standard voltage applications
Detects voltage with simultaneous visual and audible voltage indicators
Bright flashlight illuminates work area and may be used independent of voltage detection function
Green light indicates no voltage
Lightweight, compact tool with pocket clip provides convenient storage and quick access
Auto power-off feature conserves and extends battery life
CAT IV 1000V rating provides expanded operation and protection
Screw-thread battery cap with O-ring ensures protection against dust and water ingress
6.6-Foot (2 m) drop protection
IP67: Dustproof and waterproof
-------------------------------------------------------------------
Instagram: / ak4thewin
Twitter: / 4thewin8 | 4thewin8
Site: www.vlog.4thewin.net/
Facebook: / ak4thewin
-------------------------------------------------------------------

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@NyxKemo Год назад

I have the Klein Tools one which also has a thermometer, it’s insanely sensitive and can detect voltages below 12v ac or dc, i use it usually to find wires or see if there’s voltage going through wires, when i work with 120v, i will always double check with a multi meter afterwards to really make sure the circuit is off

@mikeanderson1139 5 месяцев назад

good thorough presentation. Found out everything I wanted to know. I, too, have no use for the green ones!

@inventamus Год назад

Skip to minute 5:00 if you want to see how to use it.

@turkeyspoony Месяц назад

A fun test is an air filter ionizer, will set it off 6 inches away.

@davetuttle9701 9 месяцев назад

Excellent video thank you

@RobertSloan-rh1gk 4 месяца назад

Good video but you missed one of the key uses. NCVT are great for detecting no ground. The field around ungrounded wiring is much bigger than grounded. In my case we do a lot of knob and tube replacement. If you put the sweet spot of most NCVT one the cover plate screws at a switch or outlet it will not indicate if grounded, but will indicate if not grounded. Big light fixtures with a lot of metal have enormous fields. Sometimes I can pick up no ground 18" away from any wire because the metal of the fixture enhances the magnetic field of the ungrounded wiring.

@skywalker8396 Год назад

How’s it compared to Fluke NCVT?

@joshneill6057 2 года назад

Just bought the 2p and when its in 12-1000v mode and I turn it on it beeps 3times with red and green leds flashing then powers down? When I turn it on in 70-1000v it turns on and when ai switch it to 12-1000v and i get close to electrical it beeps slow with no flashing lights? Do I have a bum tool?

@chwk2003 Год назад

Mine has given me problems from day one. It's not reliable so it's going into the garbage.

@mbwatson122 Год назад

What does it mean when it blinks blue

@peterprice6365 Год назад

why isn't it NCVT?

@8bitsamurai6 2 года назад

We call them dummy testers in electrical. You really should fully trust a dummy tester anyways if actually worried for ur life. But they are great tools for finding wires or circuits.

@4thewinak 2 года назад

agreed. Good practice.