Тёмный

KLR 650 Mod That Isn't Worth Doing (For Me) | 14 / 16 Tooth Sprocket 

SWANKY CAT
Подписаться 34 тыс.
Просмотров 15 тыс.
50% 1

For years I've been told I should try the 14 tooth or 16 tooth mod on my gen2 & now gen3 Kawasaki KLR 650. Here's why I don't think it's worth it.
Buy Me A Beer: paypal.me/SwankyCatBeerMoney
Patreon: / swankycat
T-Shirts & Sweatshirts: teespring.com/stores/swanky-c...
Links to my gear & parts!
(If you click these and make a purchase on the sites I earn a small commission, which goes towards more videos like this!)
KLR 650 Stuff
Camel ADV 1 Finger Clutch Mod: camel-adv.com/?ref=eOBjZXsn
Racks & Bags: www.rockymountainatvmc.com/pa...
Crash Bars
Uppers: www.rockymountainatvmc.com/pa...
Lowers: www.rockymountainatvmc.com/pa...
Nilight Lights: amzn.to/3XDFdmC
LED Brackets: www.rockymountainatvmc.com/pa...
ATV High Bend Bars: www.rockymountainatvmc.com/pa...
Fat Bar Risers: www.rockymountainatvmc.com/pa...
Lexx Pipe: www.rockymountainatvmc.com/pa...
Tusk Tank Bag: www.rockymountainatvmc.com/pa...
Tail Bag: www.rockymountainatvmc.com/pa...
Other Gear
Voyager Coat: www.rockymountainatvmc.com/ri...
Voyager Pants: www.rockymountainatvmc.com/ri...
Base Layer Shirt: www.rockymountainatvmc.com/ri...
Base Layer Pants: www.rockymountainatvmc.com/ri...
Boots: www.rockymountainatvmc.com/ri...
Gloves: www.rockymountainatvmc.com/ri...
Helmet: www.rockymountainatvmc.com/ri...
Motovlog Stuff
Helmet Camera: amzn.to/36BHqdM
Mic (requires adapter or media mod): amzn.to/3qEW4Ia
Hero9 Media Mod: amzn.to/3JLLF4O
Power Bank for GoPro: amzn.to/3iCxanZ
Power Cable: amzn.to/36rxlQT
Helmet Camera Mount: www.amazon.com/gp/product/B01...
360 Camera: www.amazon.com/gp/product/B08...
Insta360 Selfie Stick: www.amazon.com/gp/product/B07...
Clamps For Holding Selfie Sticks: www.amazon.com/gp/product/B07...

Авто/Мото

Опубликовано:

 

7 июл 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 101   
@garykentner7557
@garykentner7557 Год назад
The engineers knew what they were doing with the 15 it does it all just like a KLR
@SwankyCatProductions
@SwankyCatProductions Год назад
Yep exactly, not great at either extreme and of the spectrum, but can certainly handle both!
@kawabungah20
@kawabungah20 Год назад
Definitely appreciate your thought process and "riding explanation" about sprockets. I'm very happy with my 15t, even though it's sometimes a compromise in certain riding situations. When I bought my Gen 3, I accepted a compromise and I can live with it: the price is right and it's a great bike! I did meet a guy, on the NV BDR, riding an older Suzuki DR650, who was well-practiced in swapping out his sprocket, and was very happy doing it. I like my Gen 3 as a "stocker." I don't mind roadside wrenching, but not any more often than necessary. Your channel is top rate!
@SwankyCatProductions
@SwankyCatProductions Год назад
Thanks man! That's interesting about the DR guy. I suppose if I'd seen how helpful swapping them for the extremes could be and was doing really long stretches on a big trip it would probably be with swapping between sections. I think I'd still get sick of it lol but I can see it being worth while.
@stallrod
@stallrod Год назад
I run a spare set of tires and wheels 705/700 and D606/MT21 combos for street/dirt on my 16’. While changing it’s fairly easy to change gearing, the 14 is nice off road just by slowing down the bike and not having to feather the clutch as much. 16 is nice for long periods of sustained hwy riding reduces some vibrations but keeping it below 5000rpm will reduce oil consumption. I have ridden 600+ interstate miles with a 14 and I consumed 8oz of oil per 100 miles. Still runs fine 30,000 miles later.
@matthewbritton5374
@matthewbritton5374 11 месяцев назад
No complaints here. I like all of your KLR stuff. Thanks Ben!
@gagehamilton2497
@gagehamilton2497 Год назад
I've Thought about going up to the 16 but from what I've read speedometer sensor uses the front sprocket to calculate your speed and changing it throws that calculation off. Didn't expect to see my name at the end of the video but I'm glad to help this channel as I find it to be most in line with the type of mods and riding that I do. Thanks for another great vid!
@SwankyCatProductions
@SwankyCatProductions Год назад
Huh, yeah the gen2 definitely had a cable and gear system to measure speed but the gen3 doesn't have that so it must use the output shaft for speed sensing. That's another good reason to stick with the 15! I really appreciate the support and I'm glad to hear your finding the content helpful!
@insatiable_mind
@insatiable_mind Год назад
I like the stock 15 tooth. I bought my gen 2 with a 16 tooth that the previous owner had installed. My RPM was 4500 at 70mph and now it’s 5000. With the extra torque to the ground at all speeds the bike feels happier. It only gets “vibey” above 70 and it’s not that bad. I’m sure 14 tooth would be fun if you don’t spend much time on the highway but I would get a much lighter bike for that personally.
@markcollins5026
@markcollins5026 Год назад
Man, nice I'm 69 and have a 2022 KLR, I think the stock gearing is perfect, I was just cruising 70mph the other day no problem !
@Bowstringdotcom
@Bowstringdotcom Год назад
I put a 16T on my Gen 3. I feel the 15T is pretty much good enough for the off-road that the bike can handle, and on road that the bike can handle. The KLR isn’t a single track weapon, it’s a dirt road, two track, mild off-roader, a great in town bike, and great for 55-65mph cruising. And for those parameters, the 15T is perfect. The 16T is nice in town as I’m shifting less, and is noticeably nicer on hwy at 70-75, but, in my opinion the KLR just is outside it’s realm past 70mph. The tires are too narrow, and it’s too light for anything faster and doesn’t have the stability needed for extended distances. At 65 it’s comfy, 70 it’s ok, and 75 it’s stepping out of its realm. I felt acceleration was just as good with a 16T scrim 0-60, just less shifting, but 5th gear acceleration suffers for sure. So while I am happy with the 16T when I do have those short stretches of 70-75mph to deal with, it’s a small gain. The beauty of it is that it’s a $12 part to try out.
@SwankyCatProductions
@SwankyCatProductions Год назад
That's true, it's definitely not an expensive experiment, even if you need to try both options. Honestly I'll bet I could adapt even my riding to either option, but I still figure this is the best middle ground for both of the extremes that I dabble in.
@RVAMotorsports
@RVAMotorsports Год назад
I use my 3rd gen KLR for way too many open road miles. I learned my lesson on a trip to Tennessee from South Carolina... I'll be going to the 16T
@SwankyCatProductions
@SwankyCatProductions Год назад
Makes sense, I'd do the same if I was racking up miles like that.
@tomservo5347
@tomservo5347 11 месяцев назад
When I lived in the city I switched to a 16 tooth counter that really helped dropping revs on pavement by around 400 to 500 cruising speed. Since moving out to near the family farm with gravel roads and very steep hills I switched back to the 15 tooth. With all of the deer out here I shouldn't be going too fast anyway. I also noticed the 16 tooth really dropped low end torque and I feel overworked the clutch. However I'm missing the reduced vibration at around 65 mph.
@mkramsauer
@mkramsauer Год назад
That was perfect brother 👊 your doing awesome really getting it all worked out great info on the sprockets
@SwankyCatProductions
@SwankyCatProductions Год назад
Thanks man!!!
@Magnus0311
@Magnus0311 9 месяцев назад
I’m perfectly happy with the stock gearing. Does everything I want.
@renodave77
@renodave77 3 месяца назад
My first gen klr has the 16 tooth front stock rear. Also 685 cylinder kit. No clutch slipping off road and great freeway cruising. Perfect setup I think. The bit of extra power from 685 kit does the trick
@ohdear9961
@ohdear9961 Год назад
I am sticking with the 15 tooth sprocket myself. I don't care to go over 65 on the highway anyway most of the time so I have never really been tempted to go to a 16 tooth front sprocket. I would prefer a lower first gear though. I rode a TW200 for the first time a couple of weekends ago. WOW that first gear is low! I loved it! It is the first gear I wish us KLR folks had. But you demonstrated here that low speed technical single track is possible with some extra effort and skill. Since I don't do that often either, I have stayed away from switching to a 14 tooth front. Thanks for doing this video. I agree 100%.
@SwankyCatProductions
@SwankyCatProductions Год назад
Yep %100 agree! Just because I can do 75 doesn't mean I want too, lower speeds are much more enjoyable and probably a lot safer too lol. Haha yeah everyone seems to think that a higher top gear would be best, I think a TW200 granny low 1st gear below the KLR 1st would be amazing!
@simonmears1726
@simonmears1726 11 месяцев назад
I'd leave 15 go 46 Rear
@thorsmith59
@thorsmith59 Год назад
Totally agree with your reasoning. That said, I really wish it had a six speed as it would do what both of those changes would do.
@SwankyCatProductions
@SwankyCatProductions Год назад
Yeah that would be the ideal solution!
@ADVF800GS
@ADVF800GS Год назад
I have a 2nd gen and went with a 16 tooth front sprocket and a 39 tooth rear sprocket, I can’t crawl crawl but I have done the NVBDR with it no problem and can do 75 mph at 4400rpm all day long.
@tippytailmckitty2658
@tippytailmckitty2658 Год назад
Thanks for the shoutout at the end of the video!
@SwankyCatProductions
@SwankyCatProductions Год назад
Thanks for the support!!!
@denniscoles9461
@denniscoles9461 Год назад
Keep doing your thing the way you want to bro. I love the mod vids sooooo helpful for MEEE yo go ride foh
@johnniewade6504
@johnniewade6504 Год назад
I like the product reviews. It helps my riding and safety decisions.
@SwankyCatProductions
@SwankyCatProductions Год назад
Glad to hear that Johnnie! Thanks!
@stefanpuffer
@stefanpuffer 8 месяцев назад
I went to the 16 tooth because I did mostly highway riding. I liked the lower RPM however, I knew my bike wasn't tuned right when I bought it. After going through the carb and installing the proper jets the bike ran as it should. One day I got on the highway and did a thirty mile ride shifting by feel rather than by RPM. When I got to my destination about thirty miles later I realized that I was only in fourth gear the entire time. That's when I realized that with a properly tuned bike that I didn't need the 16t sprocket. Smaller engines run better at higher RPM and it's best not to lug them which can happen if you take things too far. I also didn't like that I was having to feather the clutch more. After riding for the past two years or so on the 16t I have decided to go back to a 15. I might go up one tooth on the rear just to give me a little extra torque which should come in handy when I've got the beast loaded up.
@blueoceansailingexpedition4863
@blueoceansailingexpedition4863 4 месяца назад
Try 38 rear gear for voyaging
@keithg01
@keithg01 9 месяцев назад
I have a 1995 KLX650 that I bought new (in 1995!) currently , the bike is mint and all original with the exception of a new rear tire, a smaller 43 tooth rear sprocket, and a LITHIUM battery. Since new this thing was a dog to start because the starter cranks so slow and the decompression does not like to disengage. I also installed a primer plunger because the choke sucks too. Now with 11,000 miles on it. It starts right up anytime even after sitting all winter, and with the smaller rear sprocket, I still have more than enough power for the steep power line trails, and I can make 105 mph on the road without blowing it up. overall, the bike is a "frog", not great on the road or the trails but good enough for a good time. I say this because I've owned soo many bikes of multiple makes. the problem is the weight and weight distribution...very front heavy, and the single cylinder 650 cc engine vibrates any bodily fluids or poop you may not have expelled yet.I know some Harley owners used to fill their handlebars with sand to reduce the vibration. I wish Kawasaki would either make a better counter balance for the engine or go to a twin cylinder for better balance and probably quicker response. As for the many complaints from people about the foot pegs, mirrors, handlebars, etc. I could care less while I'm flying down the trails. I take it fishing deep in the woods to some really nice lakes. my collapsible fishing pole fits right in the small tackle box I have on the rack.
@seanhewitt2521
@seanhewitt2521 Год назад
I think your thoughts on the sprocket change are valid. I will probably go to a 16 / 42 as I will be doing way more road miles on the gen 3 than I did on my gen1. Good videos keep it up.
@SwankyCatProductions
@SwankyCatProductions Год назад
Thanks man!
@bravo_victor
@bravo_victor Год назад
Went back and forth between 14/15/16 on my ‘22, 15 is probably best, but I enjoyed the 14 most. Made the bike significantly more useful on dirt bike trails. The 16 was terrible off road and would lug the motor badly up any remotely difficult incline. Instead of choosing one, I sold the KLR and bought a WRR, which I am loving.
@SwankyCatProductions
@SwankyCatProductions Год назад
I appreciate the test results! I'm betting that's the exact outcome I'd end up with. Pretty sure I'd really like the 14 tooth for just about everything except for the few times I need to put on longer highway miles.
@Motovader72
@Motovader72 2 месяца назад
There are videos on RU-vid, changing from 15 to 16 will lower the RPM about 300 rpm at 75mph. The "upgrade" was done to mine before I got it and I don't like how much harder it grunts from a stop, takes a bit more to get it rolling. Luckily the original sprocket was included in the sale.
@grigorirasputin996
@grigorirasputin996 6 месяцев назад
I run 15/43 but I keep 14 and 16 cs sprockets with me. Switching to the 14 has saved me some grief a few times riding way out in the sticks. I haven't put the 16 on yet but its there I'd I ever decide to ride across the country. Switch the cs nut to prevailing torque style if you plan to change sprocket sizes mid ride.
@keithnortje1720
@keithnortje1720 Год назад
Love my 16t, on / off road
@SwankyCatProductions
@SwankyCatProductions Год назад
If it works, it works!
@MeasureInGrains
@MeasureInGrains Год назад
If you live "near" that hwy intersection, that must take a while to get to Harrison Hills. Would it be more worth the drive to go there, vs Tigerton trails?
@toneighty6913
@toneighty6913 Год назад
i recently put a 16 tooth on my gen 3. after 2 full tanks i switched back to 15. i didn't care for the changes in street performance on my daily commute. i lost a few mpg with the 16 too.
@SwankyCatProductions
@SwankyCatProductions Год назад
I think the gen3 actually uses the output rpm to determine speed and distance, so you'd actually have gone farther than the odometer said. I can still see the bike struggling between gears on the highway and burning up extra fuel too though.
@timothysalmen2747
@timothysalmen2747 Год назад
Factory gearing is the best balance for my riding . I think your next modification should be the jd jetting fuel tuner. Made a world of difference on my 2023 klr.
@SwankyCatProductions
@SwankyCatProductions 11 месяцев назад
Yeah? I suppose I really should do something like that. I keep hoping my usual tune supplier will offer one but it's been almost 2 years now so I'm not sure it's going to happen lol.
@bluezhawg2104
@bluezhawg2104 Год назад
Keeping the 15t as the bike runs best with that one. It keeps the bike at near peak torque when cruising. The engineers had it right.
@SwankyCatProductions
@SwankyCatProductions Год назад
That's a good point too. You might see gains in certain areas, but overall the stock gearing is usually going to be the best option.
@Surly1966
@Surly1966 Год назад
After watching hundreds of klr650 videos I’ve discovered there seems to be a low cost way to increase the wheelie power of your KLR. Simply get a mullet hair cut, remove your helmet and remove your shirt! From the videos I’ve see these mullet riders shed the terrible wheelie stopping weight of both shirt ad helmet so they can keep the front wheel in the air for as long as you wish. Do your own research you’ll find the amazing things that this combination combined with the attitude that your invincible can change your life( or end it) I’m joking of course but if you do look for klr650 whellie videos. Many are involving the mulleted helmetless daredevil.
@shortattentionspangarage1312
@shortattentionspangarage1312 8 месяцев назад
That looks a lot like east-central Wisconsin. Fox Valley area maybe? I've spent years all over WI.
@billysharp2242
@billysharp2242 5 месяцев назад
I wish I could ride trails like that in Arizona... Most "trail riding" has been shut down here for a long time.. there are lots of long dirt roads out here... I want some trees!!!
@SwankyCatProductions
@SwankyCatProductions 5 месяцев назад
Ah man that sucks. My brother lives out there! Wisconsin is hard to beat!
@RTOutdoors
@RTOutdoors 7 месяцев назад
Had a 16t on my gen1. Great for highway and was okay on fire roads. On trails the clutch was taking a lot of abuse though.
@SwankyCatProductions
@SwankyCatProductions 7 месяцев назад
Mmm, yeah I suppose you would end up dragging the clutch a lot. Good info, thanks!
@ricardok5593
@ricardok5593 Год назад
@swankycat did you try the fork brace for the KLR-650? I wonder if that makes a difference on the freeway.
@SwankyCatProductions
@SwankyCatProductions Год назад
I ordered one a while back actually yeah, haven't done any testing yet though.
@justinbruck9602
@justinbruck9602 4 месяца назад
So, I haven't really gotten going on the KLR yet, by my thought is to drop to the 14th for my daily commute riding (country roads, city, etc) and then get a second rear wheel with a more highway oriented tire and a 38 tooth sprocket for the long highway trips.
@slalomking
@slalomking 7 дней назад
Way too much trouble to switch wheels. You haven’t had it off yet, right?
@theorthobiker
@theorthobiker Год назад
I think the KLR S model will be my second bike. I ride a sporty now and I have only had 5 gears for years. If I ever did get a bike with a 6th gear, it might take me a long time to use it. Lol
@SwankyCatProductions
@SwankyCatProductions Год назад
Haha yeah I still search for it but even after owning a Tenere 700 I'm pretty happy with 5th most of the time.
@mrt4755
@mrt4755 Год назад
defiantly don't want to spend allot of time on the freeway with those tires i had the dsport rear on my KLR barley 500mi in and ive noticed the rubber is already starting to split in-between the knobs
@SwankyCatProductions
@SwankyCatProductions Год назад
Agreed, although I haven't noticed and splitting yet. Just the mean wobble.
@Willie_MN
@Willie_MN Год назад
What Radio are you running on your Tank Bag?
@garrettno2906
@garrettno2906 Год назад
KLRs are built on the premise that they can do everything good enough. The 15 tooth sprocket follows that same logic. It may not be the best on the trail or the highway, but if you need one part to do both adequately the 15 is the perfect middle ground. I ride a Gen 2 and what I love is being able to pull directly off the road onto a trail without having to stop or adjust anything.
@SwankyCatProductions
@SwankyCatProductions Год назад
Agreed!
@JD1459
@JD1459 10 месяцев назад
I agree 100%.
@Stuntmanjeff
@Stuntmanjeff Год назад
I’m sticking with the 15 for the exact same reasons
@chadkline4268
@chadkline4268 11 месяцев назад
There's 17t available too.
@cybrnathan
@cybrnathan Год назад
Yeah, i thought about switching one way or the other but I didn't really see any real beneifit..... what i'd really like to know is how you have your mic setup in your helmet. There's so little background noise (wind, etc....). Are you doing something special (extra foam.....), or is that just how your mic is working?
@SwankyCatProductions
@SwankyCatProductions Год назад
The mic I have is actually really inexpensive but does work very well. The secret is the helmet though, it's sealed up around my neck really well an let's in very little wind.
@gunghoadventures871
@gunghoadventures871 7 месяцев назад
Good vids, 16 tooth with a laden expedition ride makes a difference. Im talking Dempster Stuff. Not bush riding.
@Ebbonified
@Ebbonified 2 месяца назад
I would think that this difference of sprocket choices should all just boil down to riding preference. The mod to 16/42 should not at all entice a trails-mostly rider. If your style is to transport your bike to "the fun place" on a trailer, then don't dare touch the sprockets. If you plan to ride a lot of highways with the possibility of rugged tracks, then this might be a great change. If you do 60/40 favoring improved roads, or if you're like me with about 85% on hard ball, then the 16/42 makes all kinds of sense.
@JerryAndKimcheeADV
@JerryAndKimcheeADV Год назад
I don't mind the front tire at all at 65
@anthonyschroeder7458
@anthonyschroeder7458 Год назад
Came to same conclusion 👍
@SwankyCatProductions
@SwankyCatProductions Год назад
It might not be perfect, but it works!
@bricetetrick1457
@bricetetrick1457 Год назад
Tried both directions, went back to stock.
@ivanhamlyn
@ivanhamlyn Год назад
Think mine has a 16/42
@user-xp5vb5zd6r
@user-xp5vb5zd6r Год назад
What is the camera that is mounted on the front?
@SwankyCatProductions
@SwankyCatProductions Год назад
Insta360, links for it and the mounts are in the video description of you want to take a look.
@kurbs1234
@kurbs1234 2 месяца назад
What mount is that for your navigation
@SwankyCatProductions
@SwankyCatProductions 2 месяца назад
Here's the video on it: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KugBNb3-PCc.html
@roxtarcool
@roxtarcool 6 месяцев назад
14 on a Gen 1 lends a more fun character to the bike on the city streets (given it's way lighter than the next gens).
@blueoceansailingexpedition4863
@blueoceansailingexpedition4863 4 месяца назад
If you are not riding bush and voyaging , 38 rear gear may be an option.
@longrider9551
@longrider9551 Год назад
My 2 cents with 45 years of riding , racing and raising hell, a single will never be ideal on the hwy, a small 4-600cc twin around 400lbs is my dream
@SwankyCatProductions
@SwankyCatProductions Год назад
Yeah that is true, they just never seem very happy at that speed haha.
@RotorflyFpv
@RotorflyFpv 2 месяца назад
15/47 do you try?
@bullbutter9699
@bullbutter9699 7 месяцев назад
14t for around town, zippy in and around traffic. 15t is too tame,14t still runs 65 70 mph all day if needed.
@denniscoles9461
@denniscoles9461 Год назад
The internet exposed how weird people really are. We go on the internet to get info for our bike so WE can go ride. Wtf would I rather watch someone else ride instead.😐
@nealstanton2892
@nealstanton2892 Год назад
I like product reviews.
@SwankyCatProductions
@SwankyCatProductions Год назад
Glad to hear that!
@randomkadrmas2630
@randomkadrmas2630 10 месяцев назад
Just wanted to say.. wooo
@SwankyCatProductions
@SwankyCatProductions 10 месяцев назад
Me too!
@billcotton1551
@billcotton1551 Год назад
I can't see changing sprockets all the tome either.
@SwankyCatProductions
@SwankyCatProductions Год назад
Yeah I'd rather spend that time riding lol
@KLRmurdercycle
@KLRmurdercycle Год назад
I run a 16. 14 isn't practical for a 24/7 rider. 1st and 2nd is plenty enough low end on a KLR with a 16. Best mod for any bike is to skill up✌
@SwankyCatProductions
@SwankyCatProductions Год назад
Yeah, with a slight shift in my expectations and some practice I think you could really make either work. 16 would probably be the most practical for most though.
@glennmcgown5814
@glennmcgown5814 Год назад
Gen 4 needs 14T and a Sixth gear (and a Doohicky). Simple
@SwankyCatProductions
@SwankyCatProductions Год назад
I'll bet they actually plan on riding the gen3 out until internal combustion engines are legislated out of existence.
@slalomking
@slalomking 7 дней назад
So you didn’t even try the other sprockets but, you know you like the 15 best? Swanky not a very good video in my opinion.
Далее
Does ONE TOOTH REALLY MATTER?  - Gearing EXPLAINED
7:13
지민 (Jimin) 'Who' Official MV
03:28
Просмотров 13 млн
НОВАЯ ПАСХАЛКА В ЯНДЕКСЕ
00:20
Просмотров 233 тыс.
T2W Review: 16 Tooth Front (Drive) Sprocket
15:09
Просмотров 52 тыс.
KLR 650 Ride to Virginia City
42:13
Просмотров 56 тыс.
Dyno Tuning 2023 Kawasaki KLR 650
18:38
Просмотров 14 тыс.
16 tooth sprocket review on a 2015 KLR 650
10:29
Просмотров 29 тыс.
KLR 650 14 tooth sprocket!
5:55
Просмотров 37 тыс.
3 Best Modifications To Improve Your KLR650
9:24
Просмотров 14 тыс.
зил
0:32
Просмотров 734 тыс.
😳 ВЫЖИВАЮ В ДРИФТ МАШИНЕ
0:39
Просмотров 2,7 млн
ЗЛОЙ ВЫХЛОП на КИТАЙЦА #shorts
1:00