Love this shit. Just picked up another '22 klx140. Exhaust on the way, new front springs, and rear shock on the way. Might pick up that 22mm carb too and itll be a ripper.
Yup the 140s are Cadillacs for sure. We have more videos coming out installing the tb cam and a bbr rev box. Don’t forget to drop a tooth on your front sprocket too
Is there a way I can adjust the stock carb air to fuel on a 2024 klx 140 some people cut a slot for a flat head to on the brass plug but it’s running lean with the slip on
Definitely need some jets in her. Don’t be afraid to put in jets. More fuel more power and way easier starts. They come lean from the factory, so the fact you have added exhaust she definitely needs it now.
Looking for an update video on this. My 2020 klx140 runs like doodoo. I am at elevation, need to mess with the jettings. I need the bike to run decent enough at 6000'-10000' Just wondering if I should purchase this carb and then mess with jettings or just mess with the stock carb. Thanks man.
@keatonpeterson9176 well normally these bikes are jetted pretty lean from the factory but that’s at a elevation of 600ft. Lol. I would try going leaner on your jets with your stock carb. Does it start okay then run like crud?
@@FullSpeedImpulse it is definitely running rich. I was thinking better airflow would help lean it out, maybe a different carb would be better to get more airflow. I'll start with the stock carb. Is the uni filter mod worth cutting up the air box for? Thanks man
Dude I can’t get my 24klx140 to run good with the vm26 kit. Have you had good luck with them? If so what carb settings ? I’m at 1000 ft bogs like crazy past 1/4 throttle.
I would think the 22mm would do well to create good low end and mid range grunt for Woods riding. The smaller opening creates a faster intake vacuum, better snap open throttle control without the engine getting the occasional hickup. Try plugging the vacuum port for the air cut valve if your carb has them. It will make the bike run better when you need to chop the throttle multiple times.
@jasonphillips3297 I purchase the 22mm from tboltusa. You have to be careful there are two versions. You do not want the carb with the main jet access on the side of the bowl.
