No video :(

Knife Making - How To Make Micarta / Homemade Micarta

Подписаться 76 тыс.

Просмотров 77 тыс.

50% 1

I wanted to try and make my own micarta. And a fellow french maker, Olivier Chambon, inspired me to do so in one of his video (the video is in french : • fabrication / recyclag... ).
I used leftover materials from my Native American Headdress build and cheap "crystal clear" two part epoxy resin I found at my local craft store.
This video is a test, a proof of concept. As you will see in the video I used only few layers of cloth and around 90ml of epoxy. It was enough to make what will become knife scales in a future build.
It's quite thin but just thick enough for what I intent to do with it.
So stay tuned to see what I make out of it. :)
Music : Namaste by Audionautix
Find me on
my website : www.theredsmith.com
Facebook : / the-redsmith. .
Instagram : the_redsmith
Twitter : @the_redsmith
Check my other videos :
Three cup holders : • DIY - Making Coffee Cu...
Custom Leather Watch Band : • DIY - Making A Leather...
Making a Woodworking Marking Knife (x3 - Making It Podcast Homage) : • Knife Making - How to ...
Part V - Final Assembly - DIY Native American Headdress / War Bonnet : • Part V - Final Assembl...
Part IV - Ornaments - DIY Native American Headdress / War Bonnet :
• Part IV - Ornaments - ...
Part III - Feathers Preparation - DIY How to make a Native American Headdress / War Bonnet : • Part III - Making the ...
Part II - Feathers Preparation - DIY How to make a Native American Headdress / War Bonnet : • Part II - Feathers Pre...
Part I - Headdress Beading - DIY How to make a Native American Headdress / War Bonnet : • Part I - Headdress Bea...
DIY Leather Earphones (Earbud) Holder and Phone Stand : • DIY - Making A Leather...
DIY How to Make an Alcohol / Oil Lamp Forged Chandelier : • Blacksmithing - Forgin...
Blacksmith's Leg Vice & Anvil Restoration (mouting the vice + Forge Set up #2) : • Blacksmith's Leg Vice ...
Wooden Giant Ant with Brass legs : • Video
DIY Viking Canvas Tent : • DIY - Making A Viking ...
Knife Making : Forging aKnife from a file : • Knife making - Forging...
Forged Chain & Wooden Sign : • Blacksmithing - Hand ...
Euro Makers Collab 1 : Alex Q² & The Redsmith / Ninja Rebar Shuriken with Leg Sheath : • Euro Makers Collab 1 :...
1K subscribers Thank You : making "1000" shaped Shuriken : • 1K subscribers Thank Y...
Giveaway Winner Announcement : www.youtube.co...
Leather Knife Sheath : • Making A Leather Knife...
DIY Customization : Kid's room Vault / Safe from an old bedside table : • DIY - Making A Kid's R...
DIY 2x 72" / Belt Grinder with buffing wheel : www.youtube.co...
Knife Making : Knife by Stock Removal : • Knife Making : Knife b...
Leathercraft : Bracelet - First Giveaway : • Leatherworking - Makin...
Blacksmith's Wrist Cuff : • Leatherworking- Making...
Axe restoration : www.youtube.co....
DIY Perspective sign / Lamp : www.youtube.co....
Anvil restoration & Smithy setup : www.youtube.co....
Leathercraft : Key Holder : www.youtube.co....
DIY Customization : Steampunk Handgun Crossbow : www.youtube.co....
Jimmy DiResta inspired Ice Pick : www.youtube.co....
Blacksmith's Old Forge Restoration : www.youtube.co....
Thanks for watching !

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 133

@karlhurtubise7073 7 лет назад

I was thinking about making my own scales for knifemaking yesterday night, and then this comes up! Thumbs up!

@RedSmith 7 лет назад

Thank you Karl. Good thing I decided to post this one on the last minute then ;) Keep me posted with the result of making your own !

@davewolf8869 5 лет назад

I am looking to make custom handles for my BKT combat bowie that saved my life once, I like this no nonsense video! Thank you!

@RedSmith 5 лет назад

You're welcome. I hope it helped. Thank for watching!

@theone2-three438 4 года назад

How did the knife save your life?

@frankpearce834 7 лет назад

I make my own as well. Never thought to clamp it in a tray. Great idea. Less mess. great video

@RedSmith 7 лет назад

Thank you ! :)

@DiesInEveryFilm 7 лет назад

Awesome stuff man never thought of using felt buddy 👍🏼👍🏼👍🏼

@RedSmith 7 лет назад

+Diesineveryfilm Customs Thanks man. I tried to use what I had. And it worked pretty well. 😉

@WorksbySolo 7 лет назад

I really enjoyed watching this. Very nice pace to the video. Thank you for showing the details of this technique 👍🏼

@RedSmith 7 лет назад

Thanks Bernie. The music is great for a slow build. ;)

@ShogunJimi 7 лет назад

that chisel work - wow! you have me re-thinking the wax paper that I use.

@RedSmith 7 лет назад

Shogun-Jimi Haha ! the chiseling was the hardest part 😉 Thanks Jimi.

@mrsaskriders 5 лет назад

Thank you for the video and I really like the plastic dish idea.

@RedSmith 5 лет назад

Thank you very much. The plastic dish helps a lot as cheap and reusable mold :)

@turkeycreekknives133 5 лет назад

I’m guessing if you put tick marks on the plastic dish like 1/4 3/8” then you would get the micarta closer to the finished size easier? Any thoughts on that thanks for the video

@tomsdreamshopworx 7 лет назад

Came out nice and even. Look forward to seeing them on the project.

@RedSmith 7 лет назад

Soon ;) Thanks for watching.

@ijessup 7 лет назад

mesmerizing...

@RedSmith 7 лет назад

Thank you Jessie. The music helps a lot ;)

@Badgerworkshop 7 лет назад

Nice. Those layers look great when exposed

@RedSmith 7 лет назад

Thanks. I hope it will be nice on a knife ;)

@danthemakerman 7 лет назад

Awesome video man! Micarta is on my list of builds, I've been watching a bunch of videos lately of people making it. Love the Red Smith colors.

@RedSmith 7 лет назад

Thank you Dan. I had no black flet, otherwise it would have been black & red, once again ;) Good to change color for once !

@BlackBeardProjects 7 лет назад

Nice!!! It came out great! :)

@RedSmith 7 лет назад

Thank you. Now I just have to make something with it ;)

@BlackBeardProjects 7 лет назад

I bet you already know what to do! xD

@RedSmith 7 лет назад

Yes I do ;)

@AdventuresInDIY 7 лет назад

Great job! Should be a fun piece to a project.

@RedSmith 7 лет назад

Thanks Chris. I hope it will. It's a little thin but it should be just fine for what I've got in mind ;)

@fresh2salt318 7 лет назад

hey man I realy love that clear tape on the wood trick that's such a simple solution, very cool thanks for sharing .

@RedSmith 7 лет назад

You're welcome. Happy to share if it helps ;) Thanks for watching !

@samaker4 7 лет назад

Very cool. Well executed

@RedSmith 7 лет назад

sa-maker Thank you ! 😊

@SharpWorks 7 лет назад

Super clean results. Great job man!

@RedSmith 7 лет назад

Thank you !

@chadfrommancraftingtm5734 7 лет назад

I have to say I'm suprised it was red and white. I thought you would do red and black. I love the combo though and look forward to seeing what you do with them and of course as I start making more knives micarta scales made by myself is a must.

@RedSmith 7 лет назад

Thanks Chad. I had no more black felt left ;) Give it a try and tell me what you thought of it. I found it quite fun to make. And possibilities are endless.

@RedSmith 7 лет назад

That would be very cool !!!

@LivefreeanddiyTv 7 лет назад

Nicely done! 🤓👍🏼

@RedSmith 7 лет назад

Thank you very much !

@MichaelLawing 7 лет назад

Awesome! I need to get some casting resin!

@RedSmith 7 лет назад

Thanks Michael. Yes, you should. It's fun to play with ;)

@KinuGrove 6 лет назад

Interesting choice of music for this video..... makes it feel like your doing some serious work...

@RedSmith 6 лет назад

Very interesting indeed how music changes our perception of things. I'm always serious when I'm working but no serious work here :) Thanks for watching.

@LetsPrepTogether 7 лет назад

Great idea my friend! I was thinking about making micarta too but wasn't sure yet which materials to try out. How happy are you with the way the felt micarta turned out! Also great idea to use that plastic box to contain the glue up!

@RedSmith 7 лет назад

Thanks Alex. This one was just a proof of concept but worked pretty well. Happy with the flet but I should have brushed a little more epoxy into it. I was afraid to be short on epoxy (this stuff is expensive...) ;)

@lagrottedubarbu 7 лет назад

super nice result :D i'm curious to see what you'll make with it...

@RedSmith 7 лет назад

Thanks Olivier. You were a great inspiration for this one ! ;)

@RedSmith 7 лет назад

Olivier Chambon And you got credits on the descirption 😉🖒

@chybz 7 лет назад

Hey mate ! Always a pleasure to watch you working. Gave me an idea of round/tube micarta for a pen where finger "rests" would show the pattern.. Thank you !

@RedSmith 7 лет назад

Thanks. You're the second one to tell me this today. I'm happy to "transmit" the idea I "received" from someone else. Being the messenger of inspiration is awesome :)

@davidendres7808 5 лет назад

I would have loved to have seen these made into knife handles

@RedSmith 5 лет назад

It's the plan ;) Thanks for watching!

@thebeardedchad 7 лет назад

You should use those to make a knife because you'll get to see the layers when you form the curves to fit your hand

@RedSmith 7 лет назад

That's the plan ;) Thanks Chad !

@Heartwing37 3 года назад

Yes....finally, someone used epoxy!!! The colors stay true and the Micarta is even stronger than using that nasty smelling yellow/brown fiberglass resin!

@RedSmith 3 года назад

Thanks. You're right, the colors are still the same, before and after.

@leksey7870 7 лет назад

Interesting!

@RedSmith 7 лет назад

Thank you !

@andii1701 7 лет назад

Cool!

@RedSmith 7 лет назад

Thanks Andrew

@ShadowNuke 7 лет назад

Love the looks of this stuff!! I'm curious, and I can't seem to find any videos doing it, but what would micarta look like with a printed photo on it? I'm curious how well it would work if you were to print a logo on paper and then make micarta with it. Has anyone ever seen it done?

@RedSmith 7 лет назад

Thank you ! I don't know, I've never seen that either. But you gave me an idea ;)

@ALLCOLOURSOFLIFE 4 месяца назад

Looks great, but still some bubbles noticeable at top red glossy surface. How to make without them?

@RedSmith 4 месяца назад

Thanks. I should have used a torch or some kind of heat source to get rid of the bubbles. Didn't have anything at the time to do it. Thanks for watching!

@JENNISWISS 7 лет назад

good job💪

@RedSmith 7 лет назад

JENNI.SWISS Thanks Lukas !

@alaskankare 7 лет назад

micarta is just cloth epoxied together? mind blown!

@RedSmith 7 лет назад

alaskankare Cloth or paper. Mostly paper. 😊

@ESCAGEDOWOODWORKING 7 лет назад

Nice.....!!!!

@RedSmith 7 лет назад

Thanks Eloy.

@holgerpresents Год назад

Hello, some of the best looking micarta I have seen. Great job! Leave a subscription - keep it up! Holger

@RedSmith Год назад

Thanks a lot and welcome aboard!!

@AndyBirkeyMaker 7 лет назад

oh man, you just gave me an idea.....

@RedSmith 7 лет назад

Nice. ;)

@28gaball 6 месяцев назад

Vraiment un beau résultat! Est-ce que tu utilises de l’époxy spécial ou c’est la même que tu utilises pour coller des manches?

@RedSmith 6 месяцев назад

Merci. J'ai utilisé de l'epoxy Cristal je crois, différente de la bi-composante pour coller.

@tonysargsyan4846 7 лет назад

wow great.looking good. what is the material?

@RedSmith 7 лет назад

Thank you. I used felt. Glad you liked it.

@ISTOmaker 7 лет назад

You do no talking videos like me...but this is bad point for us. but we survive, haha

@RedSmith 7 лет назад

R Santana Exactly 😊

@theshamanist113 7 лет назад

Can this be done with construction paper?

@RedSmith 7 лет назад

Yes, micarta is usually paper in epoxy.

@anddysworkshop8337 7 лет назад

i tried to make micarta too using polyester resin but i ended up throwing it cuz the layers were not sticking maybe because i wraped them in foil and al the resin was on the sides after clamping. can u tell me please what kind of resin did u use?

@RedSmith 7 лет назад

I used Pebeo Gedeo crystal resin (www.amazon.com/Pebeo-Gedeo-Crystal-Resin-150ml/dp/B0085M0DWK/ref=sr_1_1?ie=UTF8&qid=1500654801&sr=8-1&keywords=gedeo+resin) and it worked great. What did you use to make your micarta ? Paper, fabric, felt ?

@taqqeek 5 лет назад

What type of fabric did you use and does it matter what fabric you use? Also does the thickness of the fabric make a difference?

@nathanholbrook7276 5 лет назад

Great video! What was in the cups (Ax2 and Bx1) and where can you buy it at?

@azyfloof 7 лет назад

That came out so sharp :D Can't wait to see what you make with it! Knife handles?

@RedSmith 7 лет назад

Yes, it's for a knife handle. Have to experimente something for the blade before making the video.

@azyfloof 7 лет назад

The Redsmith Nice, Red! Can't wait to see :D

@steveprice9133 5 лет назад

What fabric is best to use?

@RedSmith 5 лет назад

Felt works well, any fabric will do

@Mr.BigweldNBTX 4 года назад

I like the plastic tub method you used. What brand epoxy are you using? I would like to try it.

@RedSmith 4 года назад

I used crystal epoxy from Gédéo. Not the best one for the job, but the only one I could find at the time. You can use the cheapest clear epoxy you can find for micarta as long as you let it cure fully. Thanks for watching!

@abdopeche Год назад

Good job،،🇲🇦🇲🇦🇲🇦🇲🇦🇲🇦

@RedSmith Год назад

Thank you!!

@stoneblue1795 7 лет назад

Nice. They look like bacon when they are done. I love bacon.

@RedSmith 7 лет назад

Thanks. Me too :)

@coenraddeclerk2356 3 года назад

love the info, BUT the music is really not working!!!!

@RedSmith 3 года назад

Thanks. And I agree. At the time I was only working with free RU-vid music and it was not the best match. Thanks for watching!

@alonzosanchez8577 7 лет назад

I'm #3?!?!? :D And Great Videos As Always I Have Your Channel Set Up For Alerts👍👏👍👏

@RedSmith 7 лет назад

Thank you Alonzo ! Thanks for setting up the alerts ;)

@davidendres7808 5 лет назад

I wish 2 things first please talk about what you are doing and show the end result in a knife handle

@RedSmith 5 лет назад

That was not the point of this video, but it will happen soon.

@camillesennegon 7 лет назад

il est super beau mais la couleur j'accroche moins...

@RedSmith 7 лет назад

Merci. Je le voulais noir et rouge, mais ce sont des couleurs que j'utilise trop souvent. Rouge et blanc, ça change un peu. De plus, c'était surtout un test pour voir si cela fonctionnerait bien.

@camillesennegon 7 лет назад

The Redsmith noir et rouge sa m'étonnes de vous !!!😂😂😂 après le micarta il y a pas trop de jolie d'assemblage possible

@RedSmith 7 лет назад

Exact. La prochaine fois j'utiliserai d'autres couleurs et sans doute du papier épais.

@phfoutdoors3892 4 года назад

What kind of resin/epoxy is that

@RedSmith 4 года назад

"Hello, nice video. Could you please tell me what kind of epoxy you used?"

@phfoutdoors3892 4 года назад

What

@phfoutdoors3892 4 года назад

@@RedSmith what

@RedSmith 4 года назад

Do you remember the last time you went to a shop and asked for something/advice? What was your first words?

@phfoutdoors3892 4 года назад

@@RedSmith What kind of resin is that

@extraSPARErib 5 лет назад

I felt let down? Feel felt up? Feltcher.

@RedSmith 5 лет назад

😊

@davidendres7808 5 лет назад

Why don't you talk?

@RedSmith 5 лет назад

Why should I?

@ClimptonDiddlehopper 7 лет назад

nice job especially for your first time. one thing though, make it thicker. when scale building you can always thin down but adding isn't an option unless you stack liners. a thicker handle is more desirable to most knife users. it gives much more control and is more comfortable. not being a dick just trying to help. good vid.

@RedSmith 7 лет назад

Thank you Billy. I always appreciate constructive criticism ;) I agree, it's a little thin. This one was a try / test / proof of concept. Next time I will definitely make it thicker ! Thanks for watching !

@ClimptonDiddlehopper 7 лет назад

The Redsmith not a problem. I like to think we can still help each other in this day. I don't claim to know everything but if I can help I feel good doing it.

@RedSmith 7 лет назад

That's the point and exactly why I make RU-vid videos ;) I was inspired for years by other makers and thought I could help / inspire other too. Thanks again !