Kohler Courage 24HP - Head Gasket Replacement

Подписаться 807

Просмотров 13 тыс.

50% 1

Here’s a video on how I replace a head gasket on a lawn tractor. Enjoy!
All the work I do is for entertainment purposes. Make sure you always refer to the service manual for which the way I do things may not be the proper way. If you choose to duplicate what I do, you are doing it at your own risk.
Links:
Head Gasket: amzn.to/4494Sau
HERCULES 12V Cordless Variable Speed Polisher/Sander - Tool Only - Item 57735 hftools.com/app57735

Развлечения

Опубликовано:

13 мар 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@bertgrau3934 2 месяца назад

Good video sir. I just finished this on a Kohler CV 730 mine was a little easier. I put the engine on a Murray 40 inch cut. Plus it has dual exhaust. I had a valve job on both heads since I had both off. Not a difficult job. The CV 730 has hydraulic lifters so no need to reset the rocker arms.

@thomasvittetoe1930 11 месяцев назад

Wish I would have found this sooner before I took the whole throttle linkage and having trouble getting it back together

@DIGGINGDEEP007 11 месяцев назад

Bummer, hope everything worked out. Thanks for watching!

@thomasvittetoe1930 11 месяцев назад

@@DIGGINGDEEP007 having trouble finding a good picture of how everything goes but together

@DIGGINGDEEP007 11 месяцев назад

Pull up the service manual online.

@tomformicola8096 6 месяцев назад

Great job , thank you for the VIDIO it will help us all 😊

@DIGGINGDEEP007 6 месяцев назад

You’re welcome, thanks for watching!

@DavidS-dj7sn Год назад

THANK YOU

@DIGGINGDEEP007 Год назад

You’re welcome! Thanks for watching!!!

@philliphall5198 Год назад

I use a peace of hd glass and sheet of sand paper to resurface them if not very bad

@DIGGINGDEEP007 Год назад

I have a piece of glass from a refrigerator shelf.

@paultakoy7091 11 месяцев назад

What polishing head is that? Thank you for the great video

@glennsprague8535 Год назад

Kohler saved $1 on these gaskets! If there was a flame ring around the hole in the gasket for the cylinder, they would last a lot longer! Mine went bad at 130 hours. Junk! I’ll stick to Briggs & Stratton!

@philliphall5198 Год назад

I very very much agree with you It’s made to fail for sure

@willwork2fish261 Месяц назад

So you don’t tighten the rock arms and leave them loose?

@DIGGINGDEEP007 Год назад

Head Gasket link is in the description.

@leonheavner9048 Месяц назад

Does kit come with both head gaskets

@richardcole6566 10 месяцев назад

what grid sand paper do you use to making sure the head was flat? Good show thanks!!!!

@DIGGINGDEEP007 10 месяцев назад

I’m not around the shop currently, but I do believe 600 grit wet sand. Thanks for watching!

@tomformicola8096 6 месяцев назад

600 grit

@bertgrau3934 2 месяца назад

I use 150 and it does a job. I use on head as he did and on the block with sand paper wrapped around a flat file. Works great.

@philliphall5198 Год назад

New head gasket number would be nice because I can’t read it that fast on phone

@DIGGINGDEEP007 Год назад

Link in the description. Thanks for watching!

@MrRam2003 Год назад

What's the difference between the two push rods? Why can't they be mixed?

@DIGGINGDEEP007 Год назад

I’ll be honest, I could never tell any difference, but in a lot of service manuals they tell you not to mix them up. Honestly, I have dropped them before I had them marked and put them back with no issues. Thanks for watching!