komatsu loading shovel sand blast 

Thx glad you enjoyed it that's what it's all about 💞👍

😁 glad your enjoying the content 👌 thanks for a nice comment stuff like this makes me enjoy it that bit more 😎

Problem with sponsors no one would trust your opinion after they found out it was sponsored I would perfer to stay honest this channel is only a hobby I enjoy makeing videos and connecting with like minded people. 😊💞

😊 thank you

😵🙉😂

😁 I'm doing a stone clean as I text made a massive difference looking brill 👌

No time to rest quotes invoices and more videos to make 😂💞

Good !!!

Thankyou glad a hobby of mine can bring joy 😊

Thx glad you enjoyed it 🤙 please feel free to have a snoop through my other videos 👌

😁 thx it's appreciated 💞

Yeah I'm aware of that the bucket was on the ground taking the weight I know its no substitute for a stand but 3 rams would have to fail for it to move? I believe they have check valves and run on separate plumbing I could be wrong but I feel much safer with the bucket on the ground than in the air 😂 I would feel better with a ram lock in place haha

There should be a prop next to one of the rams. If the customer has removed it he'll go to jail if anyone is hurt.

Thx 😊💞

😊👌👍

👌👍💞

😂

Thank you 😊

I would load up 750kgs but have the hopes of using 15/20 25kgs bags I forget exactly how many I used sorry. Normally they are taken to the spray booth ready for paint the following day 👍

😊😎💞 I'm glad you see the skill involved most people see it as point and squit alot more too it than hit and hope haha. Yeah it's a tow at times I've kinda got ust too it after an holiday my first couple of days back I know about it 😂👍

😎👌👍

terima kasih itu sangat dihargai selamat datang di pesta

😏😎 it was a rental unit and it had to look respectable just as it landed on the customers yard on the low loader😏

😊👌👍

Thank you 😊

Factory reset button in the shape of a wond 😊💞

It depends on the job in question I would say phone the supplier and explain what you want to achieve and how ie blast booth as you can reuse the media in them so different media's do different jobs just like sand paper

Thx its appreciated 👍and hello from the other side of the planet haha

@@Mobileblaster you're welcome sir i like watching your video so much nice to meet you and i wish you have a amazing day God bless you 💙💟

😂🦷😬

Thx that's appreciated 👌💞

Thx pal 👍 it depends on what your blasting and the kind of finish your after mate. Look at it like sanding a wood 80grit will rip it to bits 320 would leave it smooth. Too many variables to say 1 media suits all 👌💞

I use a selection of crushed glass from supa fine to medium+ then steel shot and soda on this job would have been fine+ crushed glass or along them lines maybe medium

Water on a job like this isn't a good idea. I have the ability to add water on this pot but every internal corner I get slurry all over me and the visor then at the end of the job it needs washing down to get the slurry off and it takes a very long time to get it all off plus the chemical that's needed to add to the water isn't cheap all this makes it not worth using 👍💞

@@Mobileblaster with the time saved it is, TSP is not that expensive. used compressed air to blow out the wet spots..

@@SegoMan TSP? Adding water is adding problems it won't make it any quicker than dry blasting all water does is suppress the dust but using water covers me in slurry the visor and then the job needs washing down to remove the slurry. only 1 pro less dust 5 or 6 reasons to keep dry if possible

5 gallon overall haha 😊

Sorry could you translate to English please I'm away from my pc and won't be near 1 for hours. Regards Mick 💞

@@Mobileblaster my fault sir.nice work you did.

@@einarvindenes9509 thx it's appreciated 👍💞

@@Mobileblaster your welkome.reminds me of old days when i used to sandblast mostly small bits and sometimes even cars and flagpoles.

@@einarvindenes9509 please feel free to have a snoop through my other videos I get upto alsorts 😁👍💞

Possibly so with the state of it. I once had to do a 12 months old 1 that was worse than this turned out it was working in battery recycling factory they tuck it back off hire when they seen it for its service 😂

RPB nova 3000 👍 the clemco lid is like a bucket and living in the past nova 3 is living in the future 😊👍 not all action cams are created equal hindsight gopro wasn't the best option alot of other options look more appealing now I know a little about video making 👍

Yorkshire 👌👍

Really don't know pal

Please send business enquiries to info@mobileblasting.co.uk. Regards Mick

Unfortunately not I tend to only get involved in the blasting process 👌💞

It's not as glamorous doing it 😂 dust gets into places you wouldn't even think of 😂👌👍

@@Mobileblaster 🤣😂🤣 I bet, but I still want to have a go at it 😊

7.5 hour 👌💞 😊 alot of work for 1 man 1 day 👌

Thx it's appreciated 👍No I don't fink so as it bounces off rubber so seals are normally fine. The pins that don't have seals only bushings they have auto grease feed so eventually it will push the media back out hopefully haha

😊👌👍

Not sure off top of my head but if I was going again I would load the van with 750kgs and hope to bring some home around 18/20x 25kgs bags 👌💞

18/20 bags to complete I would say 👌 not bring home haha would be nice lol

Depending on the paint applied and the environment its working in

I cannot remember off the top of my head but I would have loaded the van with 1 ton with the hopes of bringing most of it back with me 😊

Steel shot will get more passes but its a course media and expensive. I'm a contractor so I get paid for speed I only use my media 1 x so don't have much experience with reusing media only with steel shot I know this lasts as long as it can till it turns to dust 👍 10 15 x through the pot

AHH ok, so if you don't mind me asking, what material do you blast machinery with ?

@@MrPb99 99% of my work is with different grades of crushed glass 👌👍

Cheers bud I'll give it a try as the clean up of the iron fillings is hard going..... Great bids by the way, very interesting how you tackle different situations and products. Maybe we could get you up to Scotland for a training session.....

@@MrPb99 I'm no teacher 🤯 I will share what I know but learning someone is a different story if you can take anything from these videos please do so at your own risk I would hate for someone to get hurt by coping my ways of doing things you will find your own style that works good for you 👌💞

Fine & fine+ and medium crushed glass👍

@@Mobileblaster Top Bloke thanks, which blast pot do you use for dry blast & your wet blasting? I've been looking at an EcoQuip2, but they are very expensive

@@Milner_THX I will be doing a video shortly when I get my patent for my build blast pot 👍

@@Mobileblaster Brilliant.. Thanks Mick :)

Oooo that's bad sillica sand as been banned in the UK since the 60s with the free silica you would have been exposed to high chances of getting silicosis nearly as bad as working with asbestos 😷

@@Mobileblaster It may have been banned but a local company used to dry it and bag it for me cheap , it was my own company i knew the risks . Do you breathe the air filtered via you screw compressor ?

@@PaulGreenwald If im honest I've used sand too and not used a better media it cuts fast removes heavy scale and its cheap 😊 yeah I filter the compressed air so it's grade C air I make sure the wind from the compressor is blowing away from the intake as to reduce the chances of co2 getting into the air. It's poor air I'm breathing in I should have listened at school maybe I would have had a better job by now haha

@@Mobileblaster Nice reply ' I always felt the danger of breathing air/oil mixed compressed air was a risk ,so i bought a mains powered air pump for my helmet , worked fantastic but obviously needed mains . I was lucky enough to inheret land so i am a farmer now , still kept all the kit though . Good money in blasting now due to all regulations a lot of people got out .

@@PaulGreenwald @Paul Batchelor yeah eva mains or 12v would be ideal I did buy a 12v air pump and filter but it hammers batteries don't last a shift i was going to rig it to work off the compressor battery but nether got round to it. I would love some land it would make my life easier 😁 Its always handy having a blaster on hand ya nether know what ya want to clean up next 😊 I don't know about good money I make a modest living but I put the hours in to make it work. If I turned these hours into minimum wage I would be well below it. Not a lot of people could do the job putting a bucket over ya head for 8 hours aday getting covered in all sorts of crap and breathing 2nd grade air all day haha the unglamorous truth haha

I don't I normally leave this to the customer 👍

OK Thanks for your answsers @@Mobileblaster

Yes your right you could spend extra money and time on a slightly heavier grit then run the risk of damage to other stuff that dony need the grit in or on. At the start I explain what this company was after and all they want from me is to make the serface free from loose materials and etched for paint. They don't require me to get SA3 standards. I could do it but then the costs would make this job not feasible. This serface is totally fine to paint over as this was over 12 months ago and that's the warranty period without any issues. If a good primer is used it will eat into any remaining blooms on the metal and neutralise it.

@@Mobileblaster Thanks for your reply. I did not realise that using a heavier media can damage things. It's good to know. Thanks for sharing.

@@colinmartin5994 Your more than welcome the is a lot more to blasting than these videos show thats why I dont say they are a how to as everyone else will have a different take on things

hello and welcome I don't recall how much media I used but if I did the same job again I would load the van with 25/30 25kg bags on the hopes of using around 15/20. Time taken 7 or 8 hour my compressor is 260 cfm and I use a nozzle that gets me 100 psi. 11mm I think I know it as cdx650 3/8"

@@Mobileblaster all the best, great results, what is the size of quartz sand and what is the sandblasting machine in question, which valve do I use for the same results, much more sand :(

@@jmiki984 fine plus crushed glass don't worry about trying to match my media usage every rig and operator is different experience takes time my mate

thank you friends, all the best in your future work and I wish you a lot of success;)

Could you please translate to English I'm away from my desktop only on my phone at the moment and it don't allow me to copy paste 😳

@@Mobileblasterit's sunday! And rules is not to work on Sunday

😊💞👌

😏

This tuck me 7 hour lot of work in a shift like 👍

Please let me explain :) Ive done a lot of work for this company and they know what to expect the job sheet was hit as much area as possible the notes was its going back out on hire and just needs to look good as it roles off the low loader. Area was more important then digging the rust out this was a lot of area in the time that was allocated and only real way to save on time was to give a light blast still perfect for paint and a lot better than rubbing it down by hand in the same time frame :) the customer knows what to expect for his money all this is explained before hand plus its a repeat customer for the past 10 year or so. I know what to deliver and in the time frame he asks for. I can certainly strip every part and blast it to a inch of its lift and rebuild with brand new pipes etc but the man hours and costs involved would out price this unit. knowing what to deliver at what costs is key in this business. Thanks for your feedback.

@@Mobileblaster that makes sense. Thanks for letting me know. I love watching your channel.

@@aloggins69 I'm Glad your enjoying the content 😊 💞

@@Mobileblaster I am one of your subs now. This way I can follow your work. Thanks for sharing.

I can add inhibitors to water and then add this to the stream but then I have a slurry to remove from the steel also soon as I hit an internal corner it blows back and covers me and the visor in slurry 😵 I wouldn't know what to add to the media to do this dry to give a little protection doing it dry?

@@Mobileblaster Thanks for the reply. I was going on a past memory. I looked up the information and yes it was an inhibitor(Holdtight 102) added to water, not dry blasting media. My mistake. You were dry blasting. It was the wrong application on my part. Cool that you caught that. Thanks for the videos.

No you are correct there is a solution you can spray on after a dry blast, my local place in the us does it to avoid flash rusting

@@3000gtalex You don't need to spray anything on the metal after dry blasting all thats required is keep it dry if you plan on painting the next day and put it in dry storage over night it won't flash rust anyways. This saves money I was explaining that you need to wash the media off with a solution after wet blasting as wet blasting would reduce the dust but also increases the costs and complexity of the job 👍💞

depends what you want doing?

@@Mobileblaster Cleaning the truck body.

@@user-zm8hz2yw8t your going to need more than 1 hour 😂 if you could send enquiries to info@mobileblasting.co.uk

9.5mm on this job 👍

@@Mobileblaster спасибо 👍

Sorry what does ASMR mean?

That must have taken some guts to up root and move half way round world 😯

Please see some of my newer videos I'm starting to get the hang of it well kind of haha unfortunately I don't get involved with the painting stage very often. No more work is required to prevent rust other than painting. These early videos I was finding out what works as in time speed etc. As the very 1st videos people was asking for longer without editing thx for your feedback 💞

Skip to 7mins into the video its at 5x normal speed 👍

😎👍👌

😎👌

Your entitled to your opinion but my customer was more than happy. If you watch all the video I explain this. As all he wanted was the scabs knocking back no steel profiling just run over it. If you new what the customer had planned for this loading shovel you would say its too good so please refer to slating someone's work like this before knowing the outcome and all the factors involved. Yes I could have spent a full day on the bucket alone and made it 100% split mint but the price wasn't in the job to do this. Hope this clears things up 👍 Regards Mick

Just watched the video again what bit is poorly executed? Could you time stamp it please and I will explain what was going off or what was required because if I could get workers to do this amount of work in time allocated I would be quids in 😂👍some areas I have to leave due to knowing what will happen if I keep at a certain area or like the bucket the 1st time it's used will pull the paint off anyways so pointless wasting time effort or gear when I could spend the time doing something that would be more beneficial to the customer 👍

How much PPE do you use? And how are your hands at the end of each day? Thanks again.

@@ifyougetstucklookitup237 PPE hard hat/air fed helmet safely boots gloves 👍

@@ifyougetstucklookitup237 oh sorry its not my hands that's gets hurt my for arms skin is like leather haha amount of shot that's bounces back and hits em