Update: Please look at 10:55, the resistors would be still needed, we include them into the box for necessary use if you modified your turn signals to aftermarket LED turn signals. Please be noted, thanks.
Right after I did allllll this, and even more.... like, opening headlight, mounting morimoto, mounting smd halos, gluing headlight back together and testing it, I realize that I just mounted the morimoto hid projectors with the solenoids up side down. :):):) Instant breakdown in tears at 5:14 in the morning.
Good video man, Pburg from Atlanta here. With the green DRL's and I must say they are great headlights. One thing I didn't agree with were the very light scratches inside and even scuffs or just not clean back there, for me to reach and clean. Inside the housings. So making the light catch more through the plastic. I was able to see it on yours too. I said to myself, they just come like that then. Again, I do enjoy my product but can always be a little more looked over, you know? I would like to say again, great presentation.
Hi it is all me Crawford. I am also glad that our customer did this install video for us. We would for sure be creating more better headlights for our bike friends :)
Hello mate I can see at the last of the video that the position light (center light) is off and I have that problem, I don't know where tu plug the cable and Im searching all over the internet where I should plug it and haven't found any answer, do you know where is the right place to plug this cable? I will be very grateful if you tell me thanks.
I installed the same headlights on my 2006 r6 everything works great except the turn signals. When I turn on the indicator the lights stand still it only flash when the engine is off. Do you know a fix for this problem?
Hey In the 12:30 to 13:30 section, my kit did not come with a switch so I am going to buy one but how does the switch get power if there is only two wires from the switch and then only the white/blue wires from the demon eyes. Are the blu/white wires already powered or is there more wires for the switch??
@Led Headlight hey so I connected every thing but my demon eyes only comes on with the signaling light, and it blinks. The hi/low beam lights don’t work. Where am I doing wrong?
@@olson5252 Hey buddy I figured it out right after I posted that comment lol. Switch the low and high beam connectors that connect to the bike. That fixed everything for me.
@@DrCaptainObvious I got it figured out my ground wasnt working properly.. also does the power button turn the demon eye on and off? Mine doesn't work, wonder if anyone gets pulled over riding around with that light on .
Is there a fix for the wire if it disconnected from the ballast? When I was trying to ground the bike it came out and won't stay back on. Also when you spliced the switch with the factory switch, what are you talking about
Hello, if the wire is broken from the ballast, you'd better change a new ballast. And for the newer R6 V2 headlights, we directly add a handlebar switch to the wiring harness so that no need to spice the wire, just hook it up on the handlebar position it will be okay.
Hey what's up boss I'm trying to follow through with the video on an installation but I'm lost around 12.30 to about 13.30 not sure what wires to splice?
Hi, it is about installing the low beam on/off switch on the handlebar position, now the newer relay harness is directly with handlebar low beam on/off switch I guess, if so you can ignore this step. Thanks.
Led Headlight Hey a am also lost around this point. I have the V2. My low/high beam do not turn on but everything else is working. What can be the issue?
@@ericwashington527 I ended up having a bad wiring harness. I contacted ktmoto and they shipped me a new harness and also spar HID bulbs for the inconvenience.
Hi this is the whole headlight assembly, just unload original headlight and directly replace this headlight assembly, no need to crack the old light case to fit, thanks.
is there a troubleshooting guide? i paid the dam shop 4 hours to install them and they say they are defected....when bike turns on (first mode)its in high beam but just 2 lights no brow on, turn signal will flash amber...now when i flip my high beam switch on the brow and 2 lights will go on but when i put signals on the brow will light amber solid no flash..i get no low beam and no demon eye on did they wire it wrong? oh also my flush mounts dont turn on when signaling
Sorry to hear the issue, so where did you buy the headlights? You can directly contact the customer service for help, they would always help till the issue get resolved. We don't go check RU-vid news very often, we talk on FB or the platforms like ebey, amazon directly.
anyone have any idea to splice the turn signals? Do i just connect it to all the wires or is there one specific one I connect it to? Having trouble with this a little bit. Thanks!
I can’t seem to get the headlights to turn on....my turn signals work but not the low beams or high beams.. everything is connected like the video said.... please help
In that case we have to add one more toggle switch, or if you don't want to light up the opticals all the way you can cut the relative wires to disable them.
Hi i have a Yamaha R1 rn12 with one built in projector and I intend to modify it and install a projector where the high beam reflector light is,my question is do i need a wire harness for the high beam projector ? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-juX-dORXpSA.html
