No video :(

KTM Duke 390 Rear break fluid change

Подписаться 467

Просмотров 16 тыс.

50% 1

After using bike for 4 years, I had to change rear disc break oil. In Indore it was really difficult to find Motul DOT 4 break fluid, so finally got HP bajaj DOT 4 break fluid which is being used for Dominar 400.
Hence I made video of changing rear break fluid. Hope you people like it.

Опубликовано:

29 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@jithinmathew7066 4 года назад

Bleed it man. Damn wrong

@prathamchauhan8421 4 года назад

Wron mether ...u r only topup oil If u want to change oil u have to open caliper oil nut and drain tottle oil then re built copretion.

@GameloverSquad 3 года назад

Bro before giving information check first about the process then make video. That was completely wrong and the black oil is still in your entire break system or hose. If you know how to do oil bleeding then you can do it.

@rzzsmr 3 года назад

You know you do it wrong when the amount of dislike is higher than the likes of this video

@domididdee3329 4 года назад

That's horribly wrong!

@umeshshiwakoti2227 Год назад

There is air in the pipe you have to pump i dont think you brake works properly

@1xplorer 3 года назад

Hello, I have question, After flushing the old fluid and refills the new, The brake works normally but when I started the engine, then the ABS lock the brake that was flushed. How do I do?

@dabhi2002 3 года назад

Means abs not working for that brake?

@1xplorer 3 года назад

@@dabhi2002 I solved the problem, because I push the fluid too much so it’s overflow in the brake hose, I release the unwanted/overflowed amount of fluid and the brake works normally