KTM WP shock servicing with selfmade bleeder and filler tool 

You should position the shock such that the bleed hole is at the very top. That way any small remaining air bubbles will float out of the reservoir. The way you have it laying sideways any remaining air bubbles will bee trapped inside the reservoir. Yes, I know you pulled a vacuum. However unless you pull and Absolute Vacuum there will be some air still inside the shock. Thanks for the video.

Hi I made a system really close yo yours but I today i tried and there are two things i would like to ask you. 1 how many psi do you use to pull inside the oil and 2 when i vacum the ammo doesnt go inside by itself i have to pull it inside slowly.same story on vacum mode

Excelente vídeo! Do you keep the shock body at only one position during all the procedure?

Would like to see some pictures of the plumbing and valving you have at the machine. Demonstrate how you switch from pressure and vacuum with the one line and not introduce air. I built mine just like dezertxer's in his youtube videos. Seems to work pretty good.

Muy buen trabajo 👍👍👌👍👌

How powerful is your vacuum pump? l/min ?

how much vac you pulling on that shock in the beginning? Do you finish it off with hand bleed after. I usually find there is still lots of air in there and have to invert the shock back and forth after 2 cycles of push pull cycle.

Hi How much pressure is needed to fill the SHOCK ?

Moin, hast du eine Teileliste? Bzw. wo hast du die Sachen alle bestellt

Hello sir. Can i ask where can i buy this equipment

looks pretty cool and effective , can you advice how to fill nitrogen

Hey can you send me your plan for your homemade tool ?

ciao, the transparent vase is a filter holder for water ??

Hey

Most of video consists of listening to vacuum pump running while nothing visible is happening. You should edit this out. Video would be 90% shorter and still convey same info.

Hey, kannst du mir vielleicht noch ein paar Informationen zukommen lassen über dein Vakuumgerät? Gerne per Facebook MOTO INDUSTRIES. Gruß Flori

Hey Hast selbst gebaut?