No video :(

Kubota LX2610 50hr Service

Подписаться 1,8 тыс.

Просмотров 7 тыс.

50% 1

Thanks for watching. Please like and subscribe. Links to parts shared in video below. Have a Blessed Day!
Tennessee Yankee
Engine Oil Filter Link: amzn.to/3voWiVW
4.2 Quarts for LX2610 HSD w/ROPS. Pg 123 of your manual. Oil & Filter Initial at 50hrs, Then every 200hrs.
Engine Oil Link: amzn.to/3WNR29N
Transmission Oil Filter Link: amzn.to/3VDLcqQ
Left Rear Tire on LX2610HSD w/ROPS.
Initial filter replacement at 50hrs w/fluid top off, Filter at 200 hours w/fluid top off. Filter at 400 hours with initial complete fluid change.
Hydraulic Oil Filter Link: (Could not find link to this one at this time)
Right Rear Tire on LX2610HSD w/ROPS.
Initial filter replacement at 50hrs w/fluid top off. Filter at 400 hours with initial complete fluid change.
Transmission & Hydraulic Oil Link (same product): amzn.to/3VvDGhm
Anchor Hocking Measuring Glass: amzn.to/3C8wZuP
As an Amazon Associate, I earn from qualified purchases.

Опубликовано:

20 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 24

@thomasbutler4451 Месяц назад

Thanks for posting! Super informative!

@TNYankee2020 Месяц назад

Glad it was helpful, I appreciate you watching!

@roberttoomey1755 28 дней назад

Thanks, nice job !!!!

@TNYankee2020 27 дней назад

Thanks for watching

@coolhacker011 3 месяца назад

Thanks for taking the time and detailed demo/explanation on changing the fluids on LX2610. This helped me a lot!

@TNYankee2020 3 месяца назад

You bet. 200hr coming soon 😎

@shawnlaidley8385 Год назад

Thank you for the very detailed and thorough walkthrough. The filter part numbers were extremely helpful and I too could not find the 2nd one on Amazon otherwise I would provide the link for you to include.

@TNYankee2020 Год назад

Thanks for the feedback Shawn I appreciate it. Happy Bota’Ing.

@jimkasianides5676 Год назад

next time you do a filter change on the hydro try the vacuum trick by putting a small shop vacuum in the fill hole on the back of the tractor, this way when you pull the filter you don't lose as much fluid as you normally would

@TNYankee2020 Год назад

Thanks for the tip.

@JelenOutDoors Год назад

Nicely done. I like that you do percise measurements when refilling. Those factory filters are on very tight and the yellow dipstick makes it extremely hard to see the fluid level on it. I did my 50 hour service awhile ago. I had completely drained all of the hydraulic fluid, front axle and transmission at 50 hours. It's just me and it's not required as per manual so I am disqualified from your least amount of fluid lost challenge. I did post a video doing it on my channel. Have a great day!

@brandonkelly458 Год назад

Good video

@roberttoomey1755 Год назад

Nice job ! Thanks 👍

@TNYankee2020 Год назад

Thanks for watching!

@thegreatnorthwoodswithbb2863 Год назад

Owned my tractor 1 year. Ready to do my complete 400 hours service.. that's going to cost me a fortune.😬

@thegreatnorthwoodswithbb2863 Год назад

It doesn't matter what filler cap for the oil that you use I use the top one

@thegreatnorthwoodswithbb2863 Год назад

It's easy to remember your filters obviously the tiny one is motor oil. The next biggest one is hydrostatic or transmission. the biggest one is hydraulic

@stevetaylor2156 Год назад

Hello, nice video on how to do everything. Great info. BUT, and this is a big BUT, my LX2610 manual says to do this stuff every 200 hours, not 50.

@TNYankee2020 Год назад

Thanks. Incorrect on the interval, Initial is 50! Then 200 thereafter. refer to page 103 of your manual.

@dennisloiselle5615 9 месяцев назад

I'm enjoying your videos. I have to ask though, who told you to tighten the oil filter with the wrench? In my years of changing oil on many vehicles, never done that. Been told not to.

@TNYankee2020 9 месяцев назад

Thanks for watching, I don’t know that anybody ever told me that I guess I just think I want to make sure it’s not gonna come off. I always try not to overtighten, but I wanna make sure it’s on there good.

@stevetaylor2156 Год назад

Wow, manual says HYDRAULIC is 400 hours!