Laminate Stairs Installation How to Install Stair Tread Riser Overlap Nose Tips Mryoucandoityourself

Подписаться 63 тыс.

Просмотров 1,1 млн

50% 1

If you have a plan stairs remodel in your home, installing laminate flooring on stairs instead of carpet, you should know how to do laminate stair tread and riser installation. You can use any size laminate board for your stair risers. Please note: installing laminate stair treads you should use laminate boards that fit the whole length of the tread. We have two types of laminate stair nose - flat connection with tread and overlap. In this video, I am using overlap stair nosing. This overlap laminate nosing fits any type of laminate flooring.
Related video about stairs renovation DIY - • Hardwood and Laminate ...
THINGS I MENTION IN THIS VID:
- Stair Tread Gauge - amzn.to/2i3sLNG
- Adhesive-gun - amzn.to/2hOEoI4
- Construction Adhesive - amzn.to/2hOFeEz
- Wood Glue - amzn.to/2i3vqH4
- Dewalt Miter Saw - amzn.to/2i7JonF
- Dewalt Table Saw - amzn.to/2h3aOgy
- Dewalt 18 Ga nailgun - amzn.to/2i7TTaa
- Compressor - amzn.to/2ihgl0X
SUBSCRIBE FOR MORE VIDS! / mryoucand. .
ALSO, FIND ME HERE:
/ mryoucandoit. .
/ ovisha
------------
STUFF I USE TO MAKE VIDEOS:
Canon T5i - amzn.to/2i3ptu5
Favorite tools:
1. Woodworking:
- Pin Nailer 23-Gauge - amzn.to/2ibSUds
- Dewalt 16 Ga nailgun - amzn.to/2h33B06
- Ridgid Vacuum - amzn.to/2i7HWRZ
- Makita Jig Saw - amzn.to/2i7Oe3V
- Makita Cordless Tool Kit - amzn.to/2i2oNVF
- Laminate cutter - amzn.to/2h3A6LG
- Rubber Mallet - amzn.to/2i7mnBa
- Rockwell Versacut Saw - amzn.to/2h3zTYB
- Fein Multimaster - amzn.to/2gVcZQ0
- Undercut Saw - amzn.to/2i3poqc
- Sliding T-Bevel - amzn.to/2i3qMJu
- Hot Gluegun - amzn.to/2hOEuz2
- Tongue and Groove glue - amzn.to/2hC8bD9
Click this link for my other Hardwood Flooring Tutorials!
• Hardwood Floor Install...
Click this link for my other Laminate Flooring Tutorials!
• How to Install Laminat...
Click this link for my other Laminate Stairs Tutorials!
• How to Install Laminat...
Click this link for my other Hardwood Stairs Tutorials!
• How to Install Hardwoo...
Click this link for my other subfloor leveling tutorials
• Concrete, Wood and Ply...
Click this link to watch tutorials on Winder Stairs Installation
• Winder Stairs: Hardwoo...
Thanks for watching!
Let me know what you think by commenting and rating this video!
Don't forget to subscribe :)
Main Channel:
/ mryoucandoityourself
how to install laminate on stairs, laminate stairs installation, laminate on stairs, laminate stair tread, laminate stairs, vinyl plank flooring on stairs, overlap stair nose, laminate riser, laminate stair tread installation, overlap stair nose installation, tips, Mryoucandoityourself

Хобби

Опубликовано:

5 дек 2013

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 260

@MrYoucandoityourself 10 месяцев назад

Here are a few new videos about laminate and vinyl stairs installation: 1. New Technique for Laminate Installation Light Stair Tread With Brown Riser - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rHWC9tLdYRk.html 2. LVP Stairs Installation With Flat Square Nosing MrYoucandoityourself - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-9It2NMPjH6c.html 3. Create Jaw-Dropping Vinyl Plank Stairs with Overlap Nosing - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xHz7gNk4eEE.html 4. MILLION DOLLARS IDEA HOW TO MAKE A FLOOR NOSING - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-O0M8_oESqLk.html

@watertreaswf 10 лет назад

Very nice vids. About to start a laminate stair project and I appreciate the professionalism that I can emulate!

@MrYoucandoityourself 10 лет назад

Thanks for watching and warm comments! I'll publish more videos about laminate stairs installation next week. Do not miss it!

@mijalic1 2 года назад

Great presentation. Thank you for the time and effort you took to make this video and share it with us. Greetings from Croatia.

@MrYoucandoityourself 2 года назад

You’re welcome!

@OaktownsGreatest 9 лет назад

Thank you. What type of glue are you using?

@peteperez462 3 года назад

Nicely done. I didn’t see the description or the color of what you put down on the stairs. They are beautiful.

@MrYoucandoityourself 3 года назад

Hi Pete, thanks for your great comment!

@Michael_78 8 месяцев назад

I've found it a lot easier to work from the bottom up so that way the cut at the back of the tread is hidden by the riser. Also you can nail the tread at the back to keep it in place as the glue dries and hide the nails with the riser.

@MrYoucandoityourself 8 месяцев назад

Hi, why I am doing stairs from the up to down, because the joints between rises and treads looks more finished and you can’t see the gaps between rises and treads when walking up and down. Also I don’t like stepping up on the fresh made stairs. But all types of installation works if you’re knowing what to do.

@neuberas 5 лет назад

Thanks for sharing

@brendapuryer 3 года назад

This was helpful! Thank you. I also noticed that this seems to be a stairwell in a split level home where you did vinyl flooring on the top level. We bought stair nose to cover the edge from the top of the stairs to the exterior wall. Would it be installed the same way?

@MrYoucandoityourself 3 года назад

Hi Brenda, you can send me pictures to my Facebook page. I will have a look. Thanks

@daveladd9171 Год назад

That is awesome I am going to be doing that same project later this evening just like that I love how you do that and I'm going to copy it

@MrYoucandoityourself Год назад

Thanks Dave!

@daveladd9171 Год назад

All done 😮‍💨 thanks. Turned out good.

@wwmilanl 4 года назад

Hello thanks for the Video very informative, I have a question, Can I go and put all the risers first???? and then all the treads?? Thanks again for all your videos I learn a lot from your efforts.

@MrYoucandoityourself 4 года назад

Hi, yes you can do it , but I don’t do this because if I doing risers and treads in one time all connections getting tight, no gaps. This is the way. Thanks

@dalemihocik4732 5 лет назад

Nice job ! I'm planning to install luxury vinyl plank flooring . Would that flooring cutter in your favorite tools list be a good choice to use? Can I cut this type of flooring on a miter saw and what type of saw blade would I use ?

@MrYoucandoityourself 5 лет назад

Hi Dale, yes, the cutter is good. I am using for miter saw DeWalt or Freud blades with 40-45 teeth.

@dalemihocik4732 5 лет назад

Thanks for the tips !!!

@xilerli7537 7 лет назад

Thank you very much for making these videos. By the way, where can i buy the laminate stairs measure tool like yours?

@MrYoucandoityourself 7 лет назад

You can find on Amazon. Check "stair jig", or "stair gauge". Thanks for watching!

@scottkramer481 3 года назад

They have something very similar at Home Depot for $20

@Appoloimperial 8 лет назад

We have similar laminate as in the video, in a newly constructed house, and the nosing has a definite shiny appearance (and feel) compared to the treads. In one place what appears to be a protective film is coming away a bit where it must have been nicked by appliance moving or something. Is that really part of the nosing construction or did the installer forget to remove a protective film? Doesn't look like it would be easy to pull it all off (as you would for an appliance, etc.) and I am fairly sure it's there for a reason - to minimize wear on those edges. So I am guessing we live with those minor damaged areas which are only really visible in bright sunlight. Thanks for any insight on that.

@MrYoucandoityourself 8 лет назад

I have never seen a film on laminated nosings.

@PROGNUT777 7 лет назад

hi there, great video. where do you get that sliding jig that touches both strings ?? thanks

@MrYoucandoityourself 7 лет назад

Hi, have a look in description, please.

@ZZ90755 6 лет назад

Good job

@MrYoucandoityourself 6 лет назад

Hi Dan, thank you so much!

@robertcruz283 2 года назад

@@MrYoucandoityourself What do you use to fill the bullzone nail holes in ?

@MrYoucandoityourself 2 года назад

@@robertcruz283 Hi, for 23 Ga holes you don't need to fill up. It's too small.

@aafunmedia 2 года назад

Question I have Lifeproof vinyl planks from Homedepot left over and I want to use it on my steps but the planks have backing (underlayment) on them. Can I still use liquid nails or do I have to remove the backing first? or is there a special glue to use when the planks comes with underlayment attached? Thank you

@MrYoucandoityourself 2 года назад

In January I did stairs with same planks. I just glue it with Constraction glue, steel not complains.

@stovocore 3 года назад

Thanks for sharing. Have you ever worked with flush nose pieces as opposed to these overlap nose pieces?

@MrYoucandoityourself 3 года назад

Yes, I did it many times, laminate and wood nosing as well. Sometimes made nosing from the same material. Thanks

@stovocore 3 года назад

@@MrYoucandoityourself thanks, did you have any videos on installing vinyl flush nose pieces on steps by chance?

@MrYoucandoityourself 3 года назад

Laminate Flooring on Stairs: How-to Start Installation Use Stair Jig DIY Tips Mryoucandoityourself - check this video please. Thanks!

@Jaahzi74vlogca 5 лет назад

Did you install baseboard in the basement stairs?is it recomended?

@MrYoucandoityourself 5 лет назад

No reason.

@nmcovert 5 лет назад

I am working on a stair project in my house, my stair nosing came with a metal track that it snaps into. Im wondering if i should use that or should I just glue it and use a brad nailer to fasten them down.

@MrYoucandoityourself 5 лет назад

I never did with metal track. Maybe it’s working. I have to see it. Sorry

@thejianina1 5 лет назад

You don't need the metal track you just glue the stair nose to the stairs and nail it to hold it while the glue drys.

@nmcovert 5 лет назад

To avoid face nailing the laminate nosing i changed my plans and ended up making my own white oak treads. It seemed to me it was going to be the first failing point of the laminate treads. Thanks for the reply though.

@Alex2007MUC 5 лет назад

Looks great! What kind of riser did you use? I am just wondering. Thanks for feedback.

@MrYoucandoityourself 5 лет назад

Hi, same laminate floor for riser and treads. Thanks!

@Karsten1111 9 лет назад

So do you lay the riser first than the tread butts up to that? or do you lay tread than riser?

@MrYoucandoityourself 9 лет назад

Karsten1111 1. Riser 2. Tread 3. Nosing

@santana5231 Год назад

You nailed it now that are stapled it it'll show on the material

@MrYoucandoityourself Год назад

Hi Robert, I am using pin nails 23 Gauge. The holes are very small and not visible. Also I filled holes with wood filler. Thanks!

@kennybonus6950 4 года назад

Great music.

@MrYoucandoityourself 4 года назад

I am not composer, but anyway thanks!

@steverodgers9206 5 лет назад

I know when installing laminate on floors people put down pergo underpayment, can the same be done on stairs?

@MrYoucandoityourself 5 лет назад

Hi Steve, We are doing stairs installation without any underlayment. On my channel I share my professional experiences. You can do any experiment. Thanks!

@bartseller8601 3 года назад

On stairs you Want to create a solid bond from material to floor.. is generally recommended to remove that rubber backing prior to Stair installation in order to do this..

@jamiegreen2351 8 лет назад

Is the bullnose a little bit higher than the laminate planks? This is how mine turned out (looks identical to yours). I'm worried about it being a tripping hazard with the small elevation differences in the products.

@MrYoucandoityourself 8 лет назад

+Jamie Green Yes, it is overlap nosing. It is original for this type of laminated floor. There are no problems with these nosings, don't worry.

@jamiegreen2351 8 лет назад

+MrYoucandoityourself thank you!

@SteichenFamily 5 лет назад

Does the floor at the top of the stairs float under the overhang, or is the first plank glued like the steps?

@Dragon-Slay3r Год назад

🖤💨

@cesar0610 2 года назад

Great video, could you please let us know the brand and model of the nose?

@MrYoucandoityourself 2 года назад

Hi Cesar, you can find overlap nosing in Home Depot or Lowes. Also flooring stores sell nosing with flooring material as well. If you can't find overlap nosing, you can make it from the regular nose, just cut the bottom of grove. Thanks!

@sumonsharma4085 3 года назад

Hi can let me know please, is it possible to put let strip lights on top of the thread Does it have enough gap for led Please

@MrYoucandoityourself 3 года назад

You can put on the riser under nosing.

@duaneweeks6307 10 лет назад

what is the measuring tool that you are using? I cant find it anywhere!

@MrYoucandoityourself 10 лет назад

This is a stairs measuring tool. You can find it in the special wood/hardwood floor stores or on amazon.

@mazhariqbal1520 3 года назад

Hi. Very nice Video. From where did you order the Overlap nose...and How much does it cost,

@MrYoucandoityourself 3 года назад

Same hardwood flooring store supply floor and transition as well. Price for nosing around $3 per l.f. Thanks

@harryfalero 3 года назад

What kind of adhesive is used for the greatest strength?

@MrYoucandoityourself 3 года назад

Here it is - Titebond construction glue - amzn.to/2KAhcgX

@craigneedham3693 6 лет назад

I am installing EVP from Lumber Liquidators and I have Particleboard treads. The install instructions say not to glue flooring to particleboard. Should I rip out the treads and replace with plywood/osb or not worry about it. Thanks

@MrYoucandoityourself 6 лет назад

Hi Craig, yes, you have to replaced treads.

@craigneedham3693 6 лет назад

Thanks for the quick reply! that is what I figured, just needed to hear it from an expert.

@MrYoucandoityourself 6 лет назад

Good luck with your project!

@craigneedham3693 6 лет назад

One more question. Did you glue the t&g joint for the pieces on the tread?

@MrYoucandoityourself 6 лет назад

Just lock it.

@davidliu8694 4 года назад

Hi, is there anywhere to install lvp nosing on a rounded step or it have to be square off

@MrYoucandoityourself 4 года назад

Hi David, with rounded step only one way - ordering special made nosing from the wood.

@davidg6921 4 года назад

David, how did you end up doing stair nose over rounded step edge? I am doing stairs now and the stair nose keep slipping down under pressure, I have went through every idea and cant proceed because I know that nailing and glue will not be enough to keep it from failing.

@ClassicManuals 8 лет назад

What about trimming off the bull nose on the stair below the laminate. Treads width will be 2 to 3 inches longer. Maintaining the tread width and height is very important. ???

@MrYoucandoityourself 8 лет назад

+ClassicManuals.net Sorry, I don't understand your question.

@vtectv9568 5 лет назад

is the nailer 18 or 23 gauge? you list both and didnt actually mention which you used in this video.

@MrYoucandoityourself 5 лет назад

23 Ga! I love this tool!

@AyushShrestha316 4 года назад

What size pins/nails are you using with the 23 Ga?

@MrYoucandoityourself 4 года назад

Hi Ayush, I am using 1'1/4"

@royalsoundsentertainment3299 4 года назад

Would 2" pin nails be to big? I'm using 18ga

@LongtowerNyc Год назад

Was there underlayment on the laminate? Or did you remove?

@MrYoucandoityourself Год назад

This laminate with out underlay.

@yuriygrytsulyak7784 8 лет назад

can i use laminates with padding or do i need to remove the padding?

@MrYoucandoityourself 8 лет назад

+Yuriy G Thanks for watching! For stairs you don't need to use padding.

@yuriygrytsulyak7784 8 лет назад

+MrYoucandoityourself , thanks for the reply! the reason i asked is i have laminate with padding already attached, do i have to remove it or can i keep it? i'd like to keep it as it wold soften the steps and make them a little quieter, but not sure if keeping the padding will provide enough grip for the glue. thanks again

@MrYoucandoityourself 8 лет назад

It is up to you, but usually I haven't seen laminated stairs with underlayment.

@raghumaiya 6 лет назад

I checked with the manufacture, they say I need to keep the padding. So now I am confused

@davidmdonaldson 5 лет назад

Raghavendra Maiya I would leave it. I’d love extra padding if I fell down the stairs! 😂

@jenicethomas948 5 месяцев назад

So are u laying the Bullnose on top of the vinyl Flooring ?

@MrYoucandoityourself 5 месяцев назад

This is overlap nose. Now we made square nose from the same material which can locks with treads.

@MrYoucandoityourself 5 месяцев назад

Here it is-New Technique for Laminate Installation Light Stair Tread With Brown Riser ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rHWC9tLdYRk.html

@HemanLee 6 лет назад

I want to remove the carpet on my rental, but I am afraid of lawsuit if someone trips on the lip of the molding. Is there a transition that doesn't have a lip?

@MrYoucandoityourself 6 лет назад

Hi Heman, did you mean overlap and flash?

@louezzie4819 4 года назад

I don't like having a lip on the stair where the bull nose is. Try walking up and down them makes your feet sore, it's crazy that they designed it this way. Plus if you cut the nose off it will shorten the step.

@MrYoucandoityourself 4 года назад

Hi Lou, I agree with you about overlap nosing, it's not comfortable. But, if we cut nose off it's make step less , I am not agree. You can cut or build out - step gonna be the same. Believe me, only build out cost much more. Thanks!

@trumpking4874 Год назад

Steps have to be a certain width by code.

@flooringart4026 4 года назад

I have a few questions : 1- is it ok if i start with the installation from the bottom and install treads first then put the riser on top? 2- is a brod nailer for nailing the nosing and treads since it doesnt leave a big hole

@MrYoucandoityourself 4 года назад

Hi, good questions! First of all I would recommend installing risers and treads with nothing’s same time, because you can do more precise installation without gaps. Best installation from top to the bottom , because you don’t need to walking up and down over fresh stairs many times. And for second question: I used 23 Ga nails, holes not visible. Thanks and take care!

@tylernettestad 4 года назад

1. Yes. 2. Yes.

@howardchan6167 2 года назад

Where do you get the Stair Tread Riser Overlap Nose? Good job..

@MrYoucandoityourself 2 года назад

Hi Howard, stairs treads and risers I made from laminate flooring. Nosing I bought together with laminate flooring from the hardwood store.Most hardwood stores supply nosings and moldings for laminate flooring and LVP as well. Thanks!

@jenicethomas948 5 месяцев назад

Did u lay the bullnose on top of the vinyl and if so did u leave any type of gap?

@jenicethomas948 5 месяцев назад

What glue should I be using ?

@MrYoucandoityourself 5 месяцев назад

I am using Construction glue, also you can use PL 400 from Home Depot.

@coolhluke8089 2 года назад

Where did you get that stair tread tool?

@MrYoucandoityourself 2 года назад

I bought it in flooring store. They not sell it more.

@goodmusl 6 лет назад

I am using an 18 GA brad nailer and it is leaving raised bumps. What am I doing wrong?

@MrYoucandoityourself 6 лет назад

Hi, I recommend you 23 Ga pin nailer, it help you.

@goodmusl 6 лет назад

What length pins?

@sabakio 4 года назад

Where you can find those materials?

@MrYoucandoityourself 4 года назад

Hi Kier, if you are mentioned about nosing, it’s supplied each flooring stores. Thanks!

@dannytran4347 3 года назад

In notice you mail and glued the laminate to the subfloor, so the question does it need room for contraction and expansion?

@MrYoucandoityourself 3 года назад

For stairs installation always glued and nailed.

@yennymunoz5114 2 года назад

@@MrYoucandoityourself what nails and gun are you using? My son is trying to do my stairs and he is stuck with finding nails that go through without showing. It's his first big project ever and this has him stumped.

@MrYoucandoityourself 2 года назад

@@yennymunoz5114 Hi Yenny, this is 23 Ga nailer. I used 1" 1/4 pin nails. No visible holes after work. - Pin Nailer 23-Gauge - amzn.to/3Hz4tnR

@paulcormier13 3 года назад

What would that stair measurement tool be called?

@MrYoucandoityourself 3 года назад

Stair jig.

@jc323socal3 2 года назад

The finish nails don’t crack the laminate bull nose?

@MrYoucandoityourself 2 года назад

I used 23 Ga pins.

@johnal4560 4 года назад

is it ok to install the laminate on stair that is not plywood??? or i have to install plywood first thx

@MrYoucandoityourself 4 года назад

You can install directly to the concrete, just use two glues - construction glue and hot glue for fast holds. Thanks

@johnal4560 4 года назад

@@MrYoucandoityourself but if it is regular wood is that ok to install directly on top of that thx

@MrYoucandoityourself 4 года назад

If you don't have enough skills, just glue down plywood first.

@johnal4560 4 года назад

@@MrYoucandoityourself but would i be able to glue it on the stair that is regular wood not plywood thx

@shirlingcastillo6888 4 года назад

Where did you buy the stair nose?

@MrYoucandoityourself 4 года назад

Hi Shirling, I have bought nosing with laminate in flooring store

@alty79 7 лет назад

Are you using a pin nailer? what size pins?

@MrYoucandoityourself 7 лет назад

Yes, 23 Ga.

@cy9254 4 года назад

What length 23ga. for 8mm laminate on stairs? Thank you

@littlebopeep2190 4 года назад

What are the grips things called please

@MrYoucandoityourself 4 года назад

Stair jog.

@steverodgers9206 5 лет назад

What ruler are you using? What is the actual name? The only one I found on amazon is $170.

@MrYoucandoityourself 5 лет назад

Hi Steve, here it is: - Woodwise Stair Jig Scribe - amzn.to/2swvftk

@julesa6941 5 лет назад

Hi, so happy found your video. It's a few years, but your laminate color is exactly what I'm looking for and stair risers. Where did you get it, what's the brand? Thanks

@MrYoucandoityourself 5 лет назад

Jules A Hi, if you living in Vancouver, I’ll give you direction. Thanks

@julesa6941 5 лет назад

Oh...Vancouver... thanks, we're in Orlando))

@NewShockerGuy 5 лет назад

I am doing our floor now with laminate in the basement. I am going to be doing the stairs and had a question. The manufacture that I went with makes both the stair tread, bull nose, and rise... Is there a reason why you did not go with a full stair tread? IE: It seems like it would be easier and faster to just put and entire stair tread on, rather than some laminate, then measure/cut... then put a the bull nose piece on the end of step... Just want to make sure I am not over thinking something here...

@MrYoucandoityourself 5 лет назад

Hi ,I am not specialize on full trad. Very hard match color with floor. My way easiest and cheap.Thanks.

@amitsharma3566 5 лет назад

Its the price difference!

@RealEstateBirdDog 5 лет назад

Those stairs must be really straight, i tried using a miter saw to cut my treads and had gaps, had to use a table saw

@MrYoucandoityourself 5 лет назад

I have many videos about stairs installation. Hardwood and laminate floor on stairs it's almost one technique. Watch and you find some ideas. Thanks!

@KAVIPATELTOPTEN 3 года назад

Expansion gap ??? I believe laminate flooring expand in hot weather

@karenliang3731 5 лет назад

could you tell me where u got nose？I am doing stair now but can not find nose. the clour same as yours. thanks.

@MrYoucandoityourself 5 лет назад

Hi Karen, this nosing I've got from the hardwood store together with laminated floor. If they don't have nosing in stock, you can ask to order it from supplier. Is this good enough for you?

@karenliang3731 5 лет назад

@@MrYoucandoityourselfThank u so much！got it.

@eklektikfunk5845 Год назад

Hi What is the name to the laminate floor? Thank You!

@MrYoucandoityourself Год назад

Hi, this video is over 7 years old. I don't remember the brand and now the more popular vinyl floor. Most flooring materials with good quality, you need just to choose the color.

@joeqiao6843 9 лет назад

I guess the nose is the most weak part. typically how many years a laminate stair nose can last? can the nose hold a 200 lb people? Thanks

@MrYoucandoityourself 9 лет назад

Joe Qiao If you need official answer you should to apply to laminate floor manufacturers. From my 12 years of experience nobody applied to make a repair for laminate stairs.

@oothedripoo2304 4 года назад

Can you install the steps with the padding underneath

@oothedripoo2304 4 года назад

On the stairs of course. Lmk ty

@MrYoucandoityourself 4 года назад

Hi Jerry no reason to do it. Stair steps should be solid. It’s professional opinion. Thanks!

@BigPiePublishing 6 лет назад

No expansion gap needed?

@MrYoucandoityourself 6 лет назад

Hi, no gaps needed for stairs.

@Thom_Yorky 3 года назад

Fixing my stairs now and was worried that the overlapping nose could be a trip hazard.

@MrYoucandoityourself 3 года назад

I don't know any problem with this type of nose.

@Thom_Yorky 3 года назад

@@MrYoucandoityourself Ok, thanks for the video too.

@mvolck7966 2 года назад

Overlapping stair nose is a trip hazard . Especially on a top step. Use interlocking flush nose when available. Walking up those stairs in socks or bare feet is going to be painful

@MrYoucandoityourself 2 года назад

Hi, I am going to start stairs installation on Tuesday with overlapping nosing too.

@motivationindrive8514 Год назад

It would be easy doing the nosing on my stairs to basement… but my stairs to living room are open sides, so trying to cut miter on the laminate flooring keeps causing tearout and breaks

@MrYoucandoityourself Год назад

1. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tJ6K6oaZtrk.html 2. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-z_GG56gUZwM.html

@Dragon-Slay3r Год назад

💨

@codydroughan8056 4 года назад

Use treadlock not garbage PL you want them to be able to have a tiny bit of flex.

@MrYoucandoityourself 4 года назад

Hi Cody, I used construction glue for a subfloor. This glue the same strong like a Tread-Lock.I never use PL for the stairs. Thanks!

@ales8086 7 лет назад

is the tool to measure angles and length home made ? or is there a place to buy it.

@JavierMorales-td7bz 5 лет назад

horizon forest products in N.C

@stephenchristy4845 5 лет назад

Did you use a stair skirt?

@MrYoucandoityourself 5 лет назад

Hi Stephen, Yes,I did, but not often.

@edgarvelazquez4047 3 года назад

Nail whit the timen will deteriorate and expand coming damage laminate floor u need just glue it on tape it down for 24 hours

@MrYoucandoityourself 3 года назад

Hi Edgar, you can do it with glue only, I did it time to time, but for better and fast result I use 23 Ga pin nails. It’s not visible and made very little whole with out damage finished surface of laminate flooring. Thanks for watching and commenting!

@dennisdesroches1748 8 лет назад

what glue?

@MrYoucandoityourself 8 лет назад

+Dennis DesRoches Construction glue or PL400. You can buy it in Home Depot.

@urielbautista5700 2 года назад

buenos dias como sepega esas piesas

@MrYoucandoityourself 2 года назад

Hola, estoy usando pegamento de construcción.

@MrYoucandoityourself 2 года назад

- Construction Adhesive - amzn.to/2hOFeEz

@pedroespinoza6960 2 года назад

What the name of the t your used

@MrYoucandoityourself 2 года назад

Overlap nosing for laminate flooring.

@Hotitalianman 2 года назад

PL PREMUIM GLUE I ASSUME?

@MrYoucandoityourself 2 года назад

Yes

@nudratbutt5393 9 лет назад

What can u do if the stairs is round at the edges? If I need list in front its difficult with round front

@MrYoucandoityourself 9 лет назад

Nudrat Butt Please visit my playlists about hardwood and laminate stairs installation and you'll see.

@edisonurrego775 7 лет назад

My question is,Do you trim off the ears off the stair after you remove the carpet to make it flush? what i have done its to leave it and glue a little skirt like 1" 1/2 out the the laminate material and then the bullnose,so the tread its still like 11" width.

@MrYoucandoityourself 7 лет назад

Like this? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dZBcxVvHUXQ.html

@luiscancino281 6 лет назад

Que atado. Es maestro???

@MrYoucandoityourself 6 лет назад

Thanks for watching!

@MrThe1234guy Месяц назад

Watching that caulk gun was painful

@MrYoucandoityourself Месяц назад

Thanks for commenting!

@pcproff 10 лет назад

Is that a San Diego oak color? Where did you get those bull noses.

@MrYoucandoityourself 10 лет назад

I didn't buy this laminate flooring, just made the job. Noses are original and come with this floor material.

@pcproff 10 лет назад

MrYoucandoityourself The reason I ask is because I cannot find the matching bullnoses and this guy told me that commonly they add a darker color to the bullnose to contrast the transitions between steps so no one mis-steps. Have you heard of this technique?

@MrYoucandoityourself 10 лет назад

pcproff Yes, I used this technique. The stairs look wonderful if you make big contrast: light treads/risers + dark bullnoses or brown treads/risers and almost white bullnoses. The more contrast - the better!

@MrYoucandoityourself 9 лет назад

Great!

@lindsaycarter1773 7 лет назад

pcproff

@sebastiaanl9876 6 лет назад

Want a long lasting stair? use a F profile on the nose,

@MrYoucandoityourself 6 лет назад

Hi Sebastiaan, in this video original nosing for this floor.Thanks for your idea.

@sandoncarson7578 2 года назад

This is not per manufacturer specs and anyone using this instructional video needs to file a lawsuit if any claim is denied for using this method.

@MrYoucandoityourself 2 года назад

I made one more video about overlap nosing. You can watch it at 8 AM PST in this Sunday. Thanks!

@cvxcfv 2 года назад

You should have shown the beginning to end including the risers.................!!!!

@MrYoucandoityourself 2 года назад

I just finished same stairs in this week. Need to make the video.

@cvxcfv 2 года назад

@@MrYoucandoityourself thank you for your effort. It's helping people like me in my research

@stevenmarano834 2 года назад

This looks like he put bullnose over top of plank. Aren’t they supposed to but flat. Not over top

@MrYoucandoityourself 2 года назад

God question! I installed overlap nosing.

@wmadanhi 4 года назад

people on here must be minted. those stair noses cost nearly 30quid each length of 90cm. id need 26 of them to do my stairs. or am I looking in the wrong places?

@MrYoucandoityourself 4 года назад

Hi Webster, all nosing for laminate stairs 8 foot length. Most of hardwood flooring stores supplying this nosings. Just ask them. Thanks

@rchancock 5 лет назад

As a stair builder for over 30 years I would not recommend laminate floor planks for a stair tread application. I can promise you will get squeaks over time. Spend the money and get solid 1" treads. That is unless you want to use your stairway as an alarm system.

@MrYoucandoityourself 5 лет назад

Thanks for professional commenting!

@raymondchow8722 2 года назад

Please be safe. I think Vinyl, Laminate, and hardwood are all dangerous on stairs. I know carpets are dirty. I think using a easily replaceable carpet runner may be the best way to go. You only have to fall down from a slippery stairs once to realize carpet is the safest option. Since permanent carpet is too hard to replace therefore I recommend a runner option.

@MrYoucandoityourself 2 года назад

Thanks!

@dennishoffman5146 3 года назад

The bull nose cannot be raised on a stair edge because it is a trip hazard and against the code. Always cut the stair covering short to let the bull nose settle level with the laminate so there is no raised edge.

@MrYoucandoityourself 3 года назад

Hi Dennis, this type of nosing is standard for a floating floor. You can send your questions to manufacturers and building departments to change the rules. Thanks!

@mramiros_handyman_service 2 года назад

@MrYoucandoityourself 2 года назад

Thanks for watching!

@joeschneider8025 3 года назад

Bad ideal stair nose to small won't pass building code super slick bust your hip

@MrYoucandoityourself 3 года назад

I don’t want to argue with you because for floating floor top nosing should be overlapping floor. In this case overlap nosing on stairs same function and passing any building codes and safe as well. Thanks for watching and commenting!

@joeschneider8025 3 года назад

@@MrYoucandoityourself do me a favor take your smartphone and Google it then get back to me

@mathewhallstein5934 2 года назад

Why did you shoot nails through a floating floor. You use adhesive on stairs because it allows for a little swelling. Nails can crack the west layer when the boards naturally react to changes in moisture. It’s fine while the house has active climate control. But let the power go out for awhile or the AC die. You will be replacing those treads.

@MrYoucandoityourself 2 года назад

Laminate flooring not affected by the moisture.

@mathewhallstein5934 2 года назад

@@MrYoucandoityourself are you serious? Laminate flooring is mainly pressed together wood held together with glue and a wear layer. When moisture intrudes it begins to swell. Many inproperly installed laminate laminate floors have buckled due to moisture. While you obviously have the skill to do the job, you lack the proper foundation of knowledge to do it correctly. I am a CFI certified flooring installer and I am letting you know that shooting nails through a floating floor is a recipe for disaster, but if your willing to warranty your work. You will find out soon enough. Good luck.

@MrYoucandoityourself 2 года назад

@@mathewhallstein5934 Hi Mathew, this video is very old, around 9 years ago I did this project, and steel no complaints. If you are so certified show the right way for people how to install laminate on stairs - make your video, please. Thanks!

@jaypee7632 2 года назад

Get rid of the music

@MrYoucandoityourself 2 года назад

Thanks for watching!

@emadnadi5206 3 года назад

HOW ABOUT THE RISERS?????????????????

@MrYoucandoityourself 3 года назад

Do you need to show how to install risers or what is your question?

@emadnadi5206 3 года назад

@@MrYoucandoityourself Your video shows the treads only . I did not see the installation of the riser. Am I missing something ????

@MrYoucandoityourself 3 года назад

Maybe this video help you - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-cuNNhddPAGw.html

@toddmiller7876 3 года назад

Does anyone know if your homeowners insurance would consider this a tripping hazard.

@MrYoucandoityourself 3 года назад

Thanks for watching!

@normtrainer3429 4 года назад

No one should use laminate on stairs, it's to slippery and the nosing sticks up to high. I have been in a few homes that did this and it hurts your feet to walk on. if you were to wear work boots it would be fine LOL

@MrYoucandoityourself 4 года назад

I like comments with news ideas and stories!

@trumpking4874 Год назад

Not everyone is a sissy. We’ve had laminate and now luxury vinyl planks on our stairs and never had a single issue.

@googleuser1006 8 месяцев назад

Shut up norm

@jamesstewart4457 Год назад

I had to turn off the video after a few seconds because the music was so loud and annoying.

@MrYoucandoityourself Год назад

You can turn sound off, and watch it again. Thanks!

@55viralata 6 лет назад

delete the annoying music and speak as you are doing your installation. this music is irritating!!!!!!!!!

@MrYoucandoityourself 6 лет назад

Ok, thanks.

@donmeyers3090 5 лет назад

That music is so dreadful it made me go home and do things I can't talk about in public. You should be ashamed of what it was though. .

@MrYoucandoityourself 5 лет назад

Hi Don, very fanny comment!

@fivestartka1 3 года назад

Not the right way

@MrYoucandoityourself 3 года назад

Hi Eric, it’s your choice. Thanks for watching and commenting!

@JONYSLIFEVLOG 4 года назад

You literally gave me nothing.

@MrYoucandoityourself 4 года назад

Maybe in next video.

@rafals5113 5 лет назад

Why Americans cannot live without nails ?!

@MrYoucandoityourself 5 лет назад

Hi Rafal, Do you have other ideas?

@rafals5113 5 лет назад

@@MrYoucandoityourself YES! Glue is good enough. When i watch Amerian DIY JOBS,nails are everywhere! I know that you love this pneumatic machine but they are not necessery in this case.

@MrYoucandoityourself 5 лет назад

Show your skills, please. I like to learn something new. Thanks!

@rafals5113 5 лет назад

MrYoucandoityourself Yeah i just go create Video special for you... I want to say that this nails are not needed at all. Rest of the work looks good. When you share videos on RU-vid have to be ready for people opinions. If you want to lear something new just TRY use only glue without nails. Simple and easy. Esthetics will be on the higher level, thats it.