Тёмный

Land Cruiser LX470 Ironman Bumper Bull Bar and Winch Install 100 series Toyota Lexus LC100 

SORENEAGLE
Подписаться 2,4 тыс.
Просмотров 31 тыс.
50% 1

This is my install of a new Ironman Commercial Deluxe bumper on a 1999 Lexus LX470. This is similar to the Toyota Land Cruiser. I came across a few issues that I covered in the video. I left out a couple items. There are AC lines that are routed just above the driver side frame at the bumper that needs to be adjusted to clear the brackets.
A lift is not required for the bumper or the tires but it's lifted about 1" with coil spacers at the rear and adjusted torsion bars at the front. If you want to keep the AHC you should make sure the globe pressures are within spec. The tires are 275/70/R18 BFG KO2

Авто/Мото

Опубликовано:

 

3 фев 2017

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 55   
@M0neyMike
@M0neyMike 2 года назад
That’s an excellent idea to widen those grill bracket holes.
@randindragonheart4558
@randindragonheart4558 3 года назад
Excellent little hacks!
@jaredc3689
@jaredc3689 6 лет назад
Looks good on there
@SORENEAGLE
@SORENEAGLE 7 лет назад
Sorry about the stills to open the video. Bad idea... but I wanted to show the packaging. This is similar to the ARB bumper but there is no bar just in front of the headlights like on the ARB. The nice thing about both the ARB and Ironman bumbers is that they are compatible with the factory air bag systems.
@chrisvideo6
@chrisvideo6 6 лет назад
No worries on the stills. I think it's a great idea to show the packaging. Thanks for the vid and the info.
@thomasq1348
@thomasq1348 5 лет назад
SORENEAGLE hey man I’m an lx470 owner as well and purchased a bull bar and I can not remove my tow hook to you have any tips
@RC-qb1dz
@RC-qb1dz 5 лет назад
@@thomasq1348 penetrating oil and a bigger breaker bar. Worked more me this weekend.
@TheJcdallas
@TheJcdallas 6 лет назад
SorenEagle-Do you have the part number or info on your TRD cold air intake system you put on? I have 2005 Lexus LX 470 and am looking for something similar. Do you see an increase in HP or MPG???
@IIKings22
@IIKings22 3 года назад
I like how your making aluminum plates and brackets right and left lol... I have no clue how to do that... haha
@SORENEAGLE
@SORENEAGLE 3 года назад
You can do it too! Hardware stores carry aluminum stock lots of shapes. Just buy a stick and experiment.
@matthewabuyen9288
@matthewabuyen9288 5 лет назад
I just got this bumper myself. I was just wondering if you can give me the exact dimensions of the spacers you made when you installed yours
@hudman4581
@hudman4581 Год назад
So by making those aluminum brackets you don’t need to drill anymore holes like the instructions say?
@stinkenlinken
@stinkenlinken 3 года назад
How are you liking the Ironman bumper now that you have lived with it a bit. I noticed you kept the AHC system. Any issues with the weight of the bumper affecting the system? Thanks.
@sangwon1
@sangwon1 4 года назад
Hi. I got the same bumper. Can you please help me with the measurements of that aluminum plate? Thank you
@nsslota
@nsslota 2 года назад
Did you ever find a resistor part that you could share to prevent the hyper flash on the turn signals?
@sayedakbari3739
@sayedakbari3739 2 года назад
do you have oem bumper for this 470 that I can use it
@breadmaker52
@breadmaker52 6 лет назад
Did you buy the bumper local or order it? Looking for either this bumper, maybe ARB or TJM.
@SORENEAGLE
@SORENEAGLE 6 лет назад
I got the bumper while in Oregon from the Ironman importer. This helped me save on shipping.
@thebigempty_5792
@thebigempty_5792 4 года назад
I wonder if Ironman has resolved this issue. The new bumpers listed on their site look a bit different as to the fog / turn signal placement. The one shown here looks just like the ARB bumper. I want to order one, but don't want to go through this fitment issue .
@T25de
@T25de 3 года назад
Free shipping right now
@africancustomfabricators9399
@africancustomfabricators9399 2 года назад
Check out of African Custom Fabricators bumper
@hudman4581
@hudman4581 Год назад
Did you ever find out if they did?
@thebigempty_5792
@thebigempty_5792 Год назад
I bought one and had it installed by a shop- didn’t hear anything from them about any fitment issues. Super nice for the money!
@petecirca1979
@petecirca1979 7 лет назад
That's a sweet bumper. I've been wanting to buy a 06 lx470 or a tlc. What are you setting this rig up for? Very nice ride.
@SORENEAGLE
@SORENEAGLE 7 лет назад
We are in NorCal and want to do light to medium trails and camping. Plus we were in Moab last year and wanted something like this so bad.
@petecirca1979
@petecirca1979 7 лет назад
SorenEagle Im thinking the same. I'm out in palm springs area. I want to buy one to see moab and overland dream vacation. Is the v8 in your model sufficient?
@SORENEAGLE
@SORENEAGLE 7 лет назад
Define sufficient... haha. It's no power house but I tow a 4000lb wake boat with it. It's a heavy vehicle to start with but it does the hills just fine.
@dansari213
@dansari213 6 лет назад
Are you local in Orlando? I’m trying to find an installer for the ome lift kit. I called 4 wheels parts and they denied the job because they didn’t want to mess with the ahc.
@SORENEAGLE
@SORENEAGLE 6 лет назад
I'm on the West coast sorry. Try some of the forums (like ih8mud.com) for shops referrals.
@RC-qb1dz
@RC-qb1dz 5 лет назад
I'm working on Installing this myself, but am not thrilled with the wiring diagram included in the instructions. How did you go about running your wiring? Where did you mount the relay?
@SORENEAGLE
@SORENEAGLE 5 лет назад
I connected the wires to the factory fog and turn signal wires that were connected to the original LX bumper. If you are working on a Land Cruiser it may not work out the same.
@RC-qb1dz
@RC-qb1dz 5 лет назад
@@SORENEAGLE I'm running a 2000 lx470. So I'll give it a go. Thanks!
@RC-qb1dz
@RC-qb1dz 5 лет назад
@@SORENEAGLE did you punch through the firewall on the driver's (by the existing hole/harness) or on the passengers side?
@TheMultisportGeek
@TheMultisportGeek 4 года назад
These bumpers should all be designed to fit the vehicle. Why do they always require Jerry rigging? Someone with my limited experience and equipment would never be able to install this on my own.
@flintknapper6039
@flintknapper6039 3 года назад
Looks like you converted to 'part time' too?
@alberttrujillo7325
@alberttrujillo7325 2 года назад
Do you sell those shims?
@carlosalejandroramirez4370
@carlosalejandroramirez4370 6 лет назад
Do you hapen to have the link for the bumper! Also how did you lift the front?
@SORENEAGLE
@SORENEAGLE 6 лет назад
www.metaltech4x4.com/ironman-4x4-100-series-land-cruiser-lx470-deluxe-black-commercial-bull-bar/
@SORENEAGLE
@SORENEAGLE 6 лет назад
The front is lifted be cranking up the t-bars. The LX470 uses the AHC so pressures will need to be corrected after lifting. See below for a link to the bumper.
@carlosalejandroramirez4370
@carlosalejandroramirez4370 6 лет назад
thanks a lot !!! hey do you happen to know like a video or like a blog for that lift job ?
@dansari213
@dansari213 6 лет назад
Did u get the vehicle lifted at 4 wheel parts as well??
@SORENEAGLE
@SORENEAGLE 6 лет назад
The LX is only lifted about an inch. I did that by adding coil spacers to the rear and cranking up the T-bars up front. This allowed me to keep the AHC suspension rather than swapping it all for new springs and shocks. The coil spacers came from MetalTech in Oregon. Here is my video of the spacers. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Eb55DDJ_vc0.html
@mhs2572
@mhs2572 4 года назад
@@SORENEAGLE Is the AHC working smoothly with this type of load upfront? Kindly let me know. Awesome work!
@SORENEAGLE
@SORENEAGLE 4 года назад
@@mhs2572 Yes. The ARB bumper isn't all that heavy and the winch with a synthetic line was only another 40-50 lbs.
@lyric.kayden
@lyric.kayden 2 года назад
@@SORENEAGLE hi, how much would you guess to the weight of the arb bumper? Also I to myself when you remove factory bumper, cross bar and everything that’s weight to be subtracted from the new bumper as well.
@vmg89
@vmg89 6 лет назад
Hows the AHC hold up with the bumper and sliders?
@SORENEAGLE
@SORENEAGLE 6 лет назад
Matchu I cranked up the t-bars as needed and adjusted the suspension heights keeping the AHC pressures in spec with the techstream software. In doing this the Crusier rides we'll and the AHC system isn't overtaxed.
@vmg89
@vmg89 6 лет назад
Do you have a link to the techstream software you used?
@davontemartin5752
@davontemartin5752 7 лет назад
Did you have to lift the vehicle at all
@SORENEAGLE
@SORENEAGLE 7 лет назад
Davonte Martin No lift required. The new bumper does provide more clearance for larger tires though.
@cruzer198921
@cruzer198921 7 лет назад
Yes, i too would like to know if the truck is lifted?
@SORENEAGLE
@SORENEAGLE 7 лет назад
The lift is not required for the bumper or the tires but it's lifted about 1" with coil spacers at the rear and adjusted torsion bars at the front. The tires are 275/70/R18 BFG KO2
@SORENEAGLE
@SORENEAGLE 5 лет назад
@@cruzer198921 It's got about 1" of lift.
@suck761
@suck761 Год назад
កៅអី
@suck761
@suck761 Год назад
570វិនok470
Далее
It was like a real simulation👩🏻‍💻
00:15
Просмотров 2,4 млн
I Built a SECRET Soccer Field in My Room!
24:15
Просмотров 15 млн
Land Cruiser Hidden Winch Mount Installation
17:51
Просмотров 17 тыс.
How To Install 100 & 105 Series Bullbar OZI4x4
14:52
Просмотров 1,7 тыс.
😱 Велосипед-лимузин?!
0:20
Просмотров 477 тыс.