Land Rover Caster Corrected Radius Arms Installation And Results (Discovery 1, Defender, RR Classic) 

Thanks for taking the time to film video! My TF arms come today for my Disco. Awesome to see it CAN be done on the ground! I'm paying to the LR gods the bolts come out cleanly :)

Nice i'm personally keeping my disco as close to factory as possible so no such upgrades but it's always nice to see someone putting them on their rig

Nice install, did a good explanation on the function of each part for those who don’t know. I’m ordering a set of arms the same and panhard rod. You could probably grind the sides down on the arm to make the bushes sit deeper on the end that wouldn’t fit.

Great video. I am getting ready to add a 2.5" OME lift to my D1 for new 33s. Good to know about the radium arms.

I ended up trimming around the yellow Panhard bushes with a knife to make them fit. Future plan is to upgrade to Td5 bolts (M16 vs M14) and bushes which fit to the adjustable Panhard and do not require the special sleeves.

#RESPECT ! [detailed and helpful] Γ

Nice one! I’ve just got the same arms to go on! I’m also considering a bit more of a lift.

Was the handling bad before? How is it now?

Hope you have better luck than me. I bent my terrafirma castor correct radius arm on a rock.

Looking to find those improved front radius arms for my P38. No luck yet, thinking for correction bushes instead!

U/P. Very good attempt at install ! Will you also upgrade the rear axle central pivot with a high articulation fulcrum bracket to match mista ? V.

What coil springs did you use??

Nice job!! Did you get the 3 degrees or 6 degrees