Large Batch of 30 Cutting Boards at a time, Tips and Tricks 2019

Подписаться 184 тыс.

Просмотров 95 тыс.

50% 1

From start to finish this is a DIY tips and tricks for doing a large batch of cutting boards at one time in a small garage or shop. Video in 4k.
Go to 3:47 for the start of the build.
At the request of a few amazing people I have set up donation links for those who want to take another step in supporting me and this channel.
paypal.me/devoswoodcraft?loca...
/ krisdevoalaska
DeVo's WoodCraft page:
/ devoswoodcraft
Kris DeVo's Photography:
/ krisdevoalaskanadventures
Contact Kris DeVo: www.krisdevo.com/contact
Affiliate links to gear I use. Doesn't cost you anything and helps my channel if your going to buy anyway. Thank you.
Combo belt - disc sander amzn.to/38HFnlo
Festool RO 150 sander amzn.to/2WO8DBB
Festool MFT clamp table amzn.to/39hHrlN
Helical head, Shelix from Bird tool. OEM and NON OEM depending on when available amzn.to/2LV8uua
My planer amzn.to/3pNnZ6H
Table saw amzn.to/391pisf
Zero clearance insert amzn.to/35Q9ib1
Dust collection amzn.to/2UQ61SA
Super cheap and awesome air filtration amzn.to/3flP3oP
Skill saw amzn.to/2WUuS97
Skill saw kit amzn.to/34TrGil
Dewalt drill and impact kit amzn.to/3pyvWMi
Router amzn.to/3mYoEj3
Dewalt chop saw amzn.to/3mWRwrK
Tool/Vac auto switch amzn.to/2KIYsfd
Jet benchtop lathe amzn.to/37TrotC
ingersoll rand air compressor 60gl amzn.to/3mVHvLy
8" VS bench grinder amzn.to/3pz9SAO
Howards Butcher block oil amzn.to/35Q9OFZ
Mineral oil amzn.to/2Mb9I4u
Food safe glue amzn.to/2Lu659j
Gopro amzn.to/3pR60w3
Camera amzn.to/3mO84lL
Wide angle lens amzn.to/38I5yIM
Great all around lens amzn.to/3aN8UwS
New Chaotic Butcher Block video is out!
Music by
Fiddles McGinty by Kevin MacLeod
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Rockytop by Audionautix
Artist: audionautix.com/
Disclaimer:
Please do not attempt to do anything you see in these videos unless you are 100% comfortable in using these tools.
I am a professional and have been using these tools and more for 30 + years.
Some techniques I do are not recommended. You are 100% reliable for your own safety and comfort level of using these types of tools.
Every time you use some of these tools you are putting yourself at risk for major injury.
Please where your safety gear and don't try things beyond your skill set.
I am not responsible for your safety. .

Хобби

Опубликовано:

3 янв 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 252

@Scuba_Son 3 года назад

Would never know they came out of a small shop. Goes to show with skill and attention to detail professional quality products don't have to come out of huge wood shops. Thanks for sharing.

@KrisDeVo 3 года назад

Thank you! Much appreciated.

@Witty..UserName 3 года назад

I'd say the opposite is true. I see more quality out of small shops where an individual takes pride in craftsmanship vs large production shops where hourly employees push buttons to collect paychecks. obviously the skill & attn is where it really lies - just my experience with a craftsman vs operators.

@andresurfs Год назад

Keep rewatching the Vids. Thanks Kris. Inspirational!

@t.e.1189 Год назад

Finally! A woodworking video with some Celtic music in it! Thank you.

@baslongstaff1819 3 года назад

New sub from the UK great work. I’m just starting out and only have a small work area but this has inspired me as to what you can achieve! I also don’t have to usually contend with such extreme elements, I salute you sir.

@KrisDeVo 3 года назад

Thank you! Appreciate the kind words. Hope it works out well for ya! Cheers

@TexasFlyer 2 года назад

Very cool. Not sure what was more beautiful, the boards or the scenery

@grzesiekk1599 3 года назад

Great work!

@billballeza377 3 года назад

Great process, Kris! Even given the limitations of your space and tools, your product looks like it came out of a large, fully equipped production facility. You’ve shown that creative thinking and hard work can result in a very professional result. Estimating your lumber costs it appears your production cost per board averaged about $20. You should easily have been able to net a fifty percent profit margin which is outstanding. Congrats and great work, Kris!

@KrisDeVo 3 года назад

Thank you Bill! Much appreciated. I ended up buying more lumber after the first 9 boards. Im into them about $40 each and they sold for 130-150. Worked out pretty well. Thanks again!

@jacques5259 3 года назад

Kris these boards are beautiful, so are the chaos boards you made. I have watched this video three times already... love your work, really appreciate you brother!

@KrisDeVo 3 года назад

Thank you Jacques! I really appreciate the kind words and am happy you enjoy the video. Ill be coming out with 2 more cutting board and butcher block vids soon. Thanks again

@deborahmiller1925 3 года назад

@@KrisDeVo I cannot find out the price. Please help.

@KrisDeVo 3 года назад

@@deborahmiller1925 contactkrisdevo@gmail.com facebook.com/Devoswoodcraft

@steveblack4576 2 года назад

Awesome job Kris.👍🥂

@1979augistine 3 года назад

Wow someone who puts there heart and soul into there dreams and it shows congratulations my man you deserve everything coming to you all directly results of being a incredibly awesome person thumbs up from the Kootenays in British Columbia Canada

@KrisDeVo 3 года назад

Thank you 1979 Augustine! Thats a great year by the way. The Kootenays look amazing. Cheers!

@shellystovall1669 3 года назад

Did one for my daughter and daughter-in-law for Mother’s Day. They love them. They’ve got them displayed and not using them though!

@timpratte9634 3 года назад

Very nice work in such limited space.

@KrisDeVo 3 года назад

Thank you very much!

@bcoorough 3 года назад

Those turned out good. Nice job!

@KrisDeVo 3 года назад

Thank you!

@hansstam6629 3 года назад

@Kris DeVo - I like to point something out at 16:00 - I recognize something here as this is an important step in success. It seems small but it represents taking the next step. This is what happens if you start to create a product and do something for the first time on your product where others might avoid creating anything in the first place. I had the same steps in my metal works as I knew it can ruin or add towards the end result. When you've done it once, you know you've added towards experience, so it's worth it. I have had these bumps every step off the way with my own stainless steel products... Maybe it says nothing to your viewers, but just doing it might be the best tip to create beautiful things. Try and succeed. Love your work! Hans - The Netherlands

@KrisDeVo 3 года назад

Thank you Hans!

@Greghc48 3 года назад

Nice job, Kris. Enjoyed your video.

@KrisDeVo 3 года назад

Thank you!

@oliver915 3 года назад

Awesome work

@KrisDeVo 3 года назад

Thank you! Cheers!

@bowlerbabe693 3 года назад

Thanks for the tips 😀. I am planning on making one for my husband. Thanks a bunch. I love your vids. Keep it up and I'm so excited when I will be able to buy 1 from you. 😊 😃

@KrisDeVo 3 года назад

Thank you! Cheers

@jpjac4594 3 года назад

Great job.👍. Nice boards

@KrisDeVo 3 года назад

Thanks 👍

@michaelstuart5207 3 года назад

I just wanted to say at 1:38 into your video. I paused it to say that i have already said wow to myself. Shook my head up and down in agreement. And given a thumbs up to nobody but myself and you. Looks like great work! Hope I like the rest of the vid.

@michaelstuart5207 3 года назад

It was good !

@KrisDeVo 3 года назад

@@michaelstuart5207 Thank you! Glad you liked it. At 1:38 was my very prego wifey helping me out.

@gregwaters944 3 года назад

Great workmanship, looking at the beginning of the video when you said you had a small shop you aren't kidding, you need a workbench!!

@KrisDeVo 3 года назад

Thats true! Thanks

@mattguzman73 3 года назад

Great vid. Want to see the chaotic Camo end grain video! Thanks.

@KrisDeVo 3 года назад

Thanks! I shot the vid but when I went to put it together it didnt really work. Might try it again sometime.

@KevinFlores-vq7zp Год назад

I really like your style, reminds me of my old longboards I built in high school but never seen Wenge used (unlike Walnut) on the edge and it looks amazing, definitely got an idea to build that into my first cutting board!! Great work! And those random puzzle looking board in the end?!! Gonna check that one out next lol

@bludolfin705 3 года назад

Well done mate

@KrisDeVo 3 года назад

Thanks!

@andrewlipic8414 6 месяцев назад

I think my favorite is the fade, but they're all really nice

@marcovelez942 4 года назад

New to your channel, absolutely gorgeous butcher blocks /cutting boards 👌💯💕

@KrisDeVo 4 года назад

Thank you!!

@carolynswanson9850 3 года назад

Koi mining

@wuillians 3 года назад

If all your boards are the same height you can clamp multiple boards together and sand the side/edge grain as a block. That's how I do it at least and it's worked out well. It also helps keep the sides perpendicular to the face by keeping the sander from wandering off plane. Hope it helps!

@KrisDeVo 3 года назад

That is a great time saving trick to do! I have done that before on different things but I don't think I tried it on these. Thanks!

@MarkH10 Год назад

@9 minutes I thought that exact thing......oh boi, here come the comments!! I also knew the process includes cleanup, but that won't save you. Nice catch, Kris!

@StArFuRyZz 3 года назад

Very nice boards. I don't even want to think how expensive the lumber is in Alaska.

@KrisDeVo 3 года назад

At least here in Anchorage it isn't too terribly bad. I'm sure it cheaper in the lower 48 though. Thanks!

@shughes599 Год назад

Thanks for the video. I found the camera work on chop saw totally disorienting and almost puked. Impressive use of space.

@chadyost444 2 года назад

Michigan winters are bad enough for me but man thats a beautiful state

@BrendaBodwin 2 года назад

So beautiful. 😁❤

@brunofreire9281 2 года назад

Incrível!

@howardsarro 3 года назад

Outstanding work! Beautiful patterns and designs. What are the overall final dimensions of your boards, and how much do you usually sell them for?

@KrisDeVo 3 года назад

Thank you! The boards are all approximately 12"x18" x1" and sold for around $135 each.

@jeremyhuggins8796 2 года назад

Love your work Kris, just beautiful! I was wondering how narrow you cut your small strips. I have the same saw and planer you did in this video. I can cut mine to 1/4 inch comfortably on the table saw, and then plane them to 3/16 or 1/8. I made a jig I insert over the table of the planer so I don't risk bottoming out the turret.

@alexanderoguguo1912 2 года назад

Your small garage has some advantages too, at least your tools are very close to you at all times. You are faster like that.

@robertwelch5584 3 года назад

So edge grain, right? Like your patterns, similar to what I do but you are using (and very well I might add) more of the thin strips than I do. Looking forward to the wood camo boards and love that description. Thanks and keep them coming.

@KrisDeVo 3 года назад

Appreciate that Robert! Yes, edge grain except for the couple of walnut boards with a few strips in them. Those were made with 6/4 I think. Thanks!

@MikeJones-nf5sd 3 года назад

Great work and you are truly an inspiration to those of us who are challenged by small work space, and even more so being that your climate is harsh as well. May I ask what is the gray colored wood you're using? The particular species I'm interested in is especially noticeable at 12:47 of the video. There are 2 pieces in each of the bottom three on the last stack. Thank you and keep up the great work!

@KrisDeVo 3 года назад

Thank you! Really appreciate that. Those were some light pieces of walnut. Not sure if it was part of the sap wood or not but definitely a lighter colored part of walnut.

@jerryr8287 3 года назад

Beautiful work, a true craftsman. How wide do you cut your boards before you turn them on end? Thanks For the video.

@KrisDeVo 3 года назад

Thanks Jerry, really appreciate the kind words. The bigger strips are 1- 3/16" and the skinny ones are 1/8" to 3/16.

@pennikinkade9002 3 года назад

Beautiful work!! What species of wood did you use primarily for the light colored wood??

@KrisDeVo 3 года назад

Thanks! Maple is the lightest color then Cherry would me the next lightest.

@gabesmith6475 2 года назад

Wow! Those turned out beautifully! I only had one question, what is the final thickness of your boards, it looked like 1 1/2” on camera but I wasn’t sure.

@KrisDeVo 2 года назад

Around 1"

@billthomas6296 3 года назад

What a fantastic job, especially for the conditions and limited work space. I am very impressed with your overall ability to complete that many cutting boards at one time. Do you go to flea markets, farmers markets or just word of mouth and friends and i saw you did Face Book as well to sell these? Thank you for sharing this video. Looking forward to watching more.

@KrisDeVo 3 года назад

Thanks for the kind words. Just my cutting board page on Facebook and word of mouth. My wife ends up selling a bunch to co workers as well.

@billthomas6296 3 года назад

What form or forms of payments do you accept.

@KrisDeVo 3 года назад

@@billthomas6296 Cash, check or paypal.

@robbieweeks6407 3 года назад

Hello Kris from the lower 48, Kalifornia the Leftist Coast!!!! Maybe something that will help you is I bought from Walmart, was a wire dish rack that you let dishes drip dry on. I bought 4 of them and leave a couple of big shop towels under the rack to absorb the oils. Not that you are asking but, I use Food Grade Mineral Oil from amazon @ $ 13.00 a gallon. Not sure what it would cost to get it to Alaska? I've never had an issue with just Food Grade Mineral Oil, just a thought. Thank you for sharing, God Bless! Cheers

@KrisDeVo 3 года назад

Hi Robbie, the wire rack thing is a good idea. Ive done that a few times but on these large batches I just lay them on top of each other. Food grade mineral oil is great. Been using that for 25 years. I really like this Howard butcher block stuff now. Might try some mineral oil and bees wax sometime too. Thanks!!

@Woodsy110 3 года назад

Great video! Mind if I ask how thick the lumber was your started with? 4/4? 5/4?

@KrisDeVo 3 года назад

Thanks! 4/4, and 6/4 depending on what is good. Its a little limited here in Alaska sometimes. Most exotics are 4/4 and 8/4 I believe.

@brynleyperrett1345 3 года назад

I've been watching your videos like a religion now, awesome info to help get someone started. I'm soon to prepare to make my first cutting boards but my question is with regards to storing the wood in the cold, I'm guessing living in Alaska you may have a little experience in that matter! I live in Norway and my workshop at night now is around -5C, the air is also moist. When I am working in there I have heating on but with the fluctuations in air temperature, manufacturing and storing the materials in the cold, then bringing the products into the home, will this cause any issues with boards breaking/splitting etc? If I make a few for gifts and so on I dont want them breaking soon after!

@KrisDeVo 3 года назад

Hi Brynley, I do store some wood outside in the cold but it is a dry cold here most of the time. I let it acclimate a few days in the garage before working with it. There is so many variables that go into there but main thing would be make sure the wood is completely dry and acclimated before working with. Hope that helps. Thanks

@donesry2902 3 года назад

Nice work. I am working on a batch of cutting boards myself and I do most of my work in the driveway, but similar setup to you. What glue do you use? I have been using Titebond 3 but it wants at least 55 degrees.

@KrisDeVo 3 года назад

Thanks! Yeah I use Titebond 3 also. Its the right stuff for food grade boards. I have a heater in the garage so temp isnt an issue for me. Sorry im not any help with that.

@scratchbuiltdesigns 3 года назад

Amazing boards Kris. What kind of wood is the bright red/orange one, which goes so well next to the maple?

@KrisDeVo 3 года назад

Thanks Dan. That would be Padauk.

@mohammedali808 3 года назад

Kris these boards are very beautiful. Can you tell what are the different types of wood used?

@KrisDeVo 3 года назад

Woods used are, Walnut, Maple, Cherry, Padauk, Wenge and Purple Heart

@johngunning2123 3 года назад

Great looking boards. What thickness do you end up making the boards?

@KrisDeVo 3 года назад

Thanks! I normaly try and keep the edge grain boards around 1" or 1 1/8".

@lucadmorgan5456 3 года назад

What are all the wood types you use? Love the videos keep em comin

@KrisDeVo 3 года назад

Woods used are, Walnut, Maple, Cherry, Padauk, Wenge and Purple Heart. Thanks!

@darkides 3 года назад

hey bud! great work, where can i get one of those stamps??

@KrisDeVo 3 года назад

I got mine from "High Heat Stamp" on amazon.

@darkides 3 года назад

@@KrisDeVo thank you sir

@L4NP 3 года назад

Great work! New subscriber. I live in Anchorage and make cutting boards for friends and co-workers as a hobby. What $ do you normally sell a board for?

@KrisDeVo 3 года назад

Awesome, thanks! Most of the edge grain boards sell from 130 - 200 and 300-350 for end grain.

@davetarrant6888 3 года назад

Those are really nice cutting boards Kris. I didn’t see your Chaos cutting board video. Did I miss it in your feed?

@KrisDeVo 3 года назад

Thanks! I filmed that video but wasnt happy with it last year. Im working on it again to make something out of it to publish. Should be up in a week or two hopefully. Thanks again.

@ToaiLonDIY 2 года назад

Nice ! Thanks, what type of wood you used.

@KrisDeVo 2 года назад

www.krisdevo.com/terms-of-service

@ninoliberatore1491 3 года назад

excellent video thankyou ,where in Alaska are you ??

@KrisDeVo 3 года назад

Thanks! Anchorage area.

@ryanking5721 3 года назад

Great job on these boards. I would like to try and make some for gifts. If you don't mind me asking where do you purchase your different types of wood from? Do you buy online or locally?

@KrisDeVo 3 года назад

Thank you! There is a local place here that carries a nice selection of hard woods. Good luck on your gifts!

@dr.crimper1733 2 года назад

What are in your board conditioner? And is it possible to get tour board care guide tips?

@jordant993 2 года назад

Nice vid one question im from new zealand been making some chooping boards but mine keep cupping how u stop the cup am i tighting my slash clamps to much?

@KrisDeVo 2 года назад

Soo many varibles with that. See if your clamps are squar when you clamp them. They way you stack and store them as well. They will cup up if only allowed to breathe on one side

@eddaeges9309 3 года назад

Hey Kris. I watch your videos. Very informative ! Thought you might get a chuckle, In January 2021, in Omaha Nebraska, it got down to - 24 below !!! I'm thousands of miles south. What's wrong with this picture ? LOL

@sethchilders6036 3 года назад

What wood did you use in the fade board? It looks like walnut and Maple but what was the middle wood?

@KrisDeVo 3 года назад

Cherry

@steveruddach7791 3 года назад

Kris...where did you get the insert? I believe that saw doesn't actually support a dado stack, but it would be nice actually have a nice insert.

@KrisDeVo 3 года назад

Pretty sure I got it on Amazon.

@tcbridges 2 года назад

I have to adk you where do you sell your boards from the mist. Like Esty or what other way

@MiaSanBayern 3 года назад

How do you get your lumber that perfect? Most of my local lumber yards, have stuff that's split, one edge unusable, and most often are sized all over the place in with....

@KrisDeVo 3 года назад

The lumber I get is exactly how you described it.

@chrisweigand1817 Год назад

very cool. question about the thin strips. Are they face grain? Are all your pieces face grain to face grain? I am confused about putting face grain to edge on cutting boards. is that ok over time? I know not to ever mix end grain with face or edge but I can't get a definitive answer on face to edge glue ups. both long grain so should be ok?? anyway your boards are beautiful and definitely going to try one.

@KrisDeVo Год назад

Face and edge are almost the same thing. End grain and edge is asking for failure.

@drew2308 3 года назад

How many BF do you normally order per board? I am just getting into this and would like to try my hand at cutting boards.

@KrisDeVo 3 года назад

I'm not really sure actually. I just go in and pick out a pile of good looking wood. I seem to always go back and get more to finish up the large batch.

@rogerwaters5477 3 года назад

Hi Kris, thank you so much for your videos! I’ve learned a lot. I hate to talk money, but what do you ask for your cutting boards?

@KrisDeVo 3 года назад

Thank you! Right now they start at 155

@rogerwaters5477 3 года назад

@@KrisDeVo thank you Kris!

@boat_life 3 года назад

Great Work! Where you selling these?

@KrisDeVo 3 года назад

Thank you! I have a Facebook group/page I sell them on. "Devo's Cutting Boards".

@PezHead65 3 года назад

Nice work Kris. Just curious, you said you had $450 into the first batch of lumber and only got 9 boards from it. At $50/board plus shop costs you into each board for around $55. How much do you charge for them?

@KrisDeVo 3 года назад

Thanks! Yeah I only got 9 boards from it but you can see there was 3 boards left of strips that were cut already that weren't going to work in a pattern for me. Probably 12 boards total for that 450 worth of wood here in Alaska. Most of the edge grain boards out of that first 9 went for $140 to $150.

@thewaterdenken1213 3 года назад

Also haha, are you ripping everything to the wider initial width, then ripping the thinner strips from that stock?.finished boards around an inch thick? Thanks again

@KrisDeVo 3 года назад

Yes and yes

@petrfedoseev3228 Год назад

Hey👋🏻. I noticed that you didn't use jointers. How did you get a flat plane?

@thewaterdenken1213 3 года назад

I know this is an older video, but I do have a few q's I hope get answered. What thickness material are you starting with? 4/4 pre planned, or 4/4 rough cut. Also are most boards built using edge and not face grain? Looks like ur thinner strips are ripped to 1/4" are the wider strips 1-1/4"? Thanks in advance, great content and beautiful boards sir. Thanks for sharing

@KrisDeVo 3 года назад

They call it S3S 4/4 for some of it. One square side and a ruff plane job. It ends up being 13/16 ish after I plane it. The other is rough cut, not square and has a light planed surface. That ends up being 3/4 ish or so. Wider strips are 1-1/4 or 1-3/16, thinner can be anywhere between 1/4 to 1/8. Mostly 1/8. I only do face grain upon request. I try to stick with edge and end grain. These were mostly edge. Thanks!

@paulaquilina1103 3 года назад

Hi Chris, how much do your cutting boards cost, what are the dimensions and what do they weight. I especially liked the ones that had a predominance of “Purple Heart”. Cheers Chris.

@KrisDeVo 3 года назад

krisdevo.com

@bradleymccollum9492 Год назад

With making such a large batch at a time, which i have chosen to do to. How do you get rid of board wobble?

@fireguy144ify 3 года назад

Beautiful.... how much are one if those large cutting boards ??

@KrisDeVo 3 года назад

Thanks! They start at $135 and up. contactkrisdevo@gmail.com facebook.com/Devoswoodcraft

@wileybucey1740 Год назад

Kris, with you having done this for a number of batches now, what is your preferred method of board treatment? Mineral oil bath followed by howard butcher block (heated) wipe down? Or just howard butcher block heated bath? You talk about in some of your videos using a heat gun to apply the butcher block oil. It looked to me that you simply heated the howard oil in a pan and wiped it on? The heat gun was to avoid open flames around the hot oil?

@KrisDeVo Год назад

Mineral oil and my board conditioner

@NickatYouTubeSucksJK Год назад

Cute meow meow!

@earlcummings3653 2 года назад

you are amazing and inspiring......I started making cutting boards for gifts and have ended up selling some now. I actually have sold a lot of face grain boards that have been used mainly as decorative items for 50 - 75 dollars, then started selling 1 inch "functional" cutting boards for 100 to 150; mine are somewhat smaller, {12 X 16). I see you have a price range on your boards as I do.......I sell a basic three lumber, (maple, walnut and cherry) for one price and then add an additional 5-10 dollars for additional wood, .ie purple heart, mahogny, wenge, padauk....just wondering if you price yours similarly? Your response is greatly appreciated, I am on the brink of retirement after an extended career.

@KrisDeVo 2 года назад

Such a loaded question, pricing is the never ending issue to making wood products.

@ronaldevans1618 3 года назад

That Planar is getting a workout lol

@raularteaga5666 3 года назад

HI KRIS ! YOU DO AN AMAZING WORK , I REALLY ADMIRED , I'M TRYING TO MAKE SOME MYSELF BUT I DON'T KNOW HOW TO PUT A PRICES TO THEME . I'M UNEMPLOYED AND IF YOU GIME A HAND WILL BE GREAT . THANKS VERY MUCH FOR YOUR HELP !!! GOD BLESS YOU !!! GREETINGS FROM TEXAS !!!

@KrisDeVo 3 года назад

Thank you, appreciate that. The couple walnut face grain boards sold for 110 and the rest sold for 130-140. Look at your local market on Craigslist and Facebook market place and see what others are selling for. Look at the quality and design and you have to be the judge of what its worth to you. Hope that helps. Good luck!

@ethanl3657 3 года назад

Jurious as to how you’re getting the faces of your boards jointed flush enough for the edge grain glue ups without a planer. I’ve made a couple cutting boards and I feel like I can never get my boards deafest flat as to where there are no gaps in the seams. Nice cutting boards I really like the paduak

@KrisDeVo 3 года назад

Not sure I understand the question. I used my planner a bunch in the video and all lumber gets run through the planner first thing on both faces.

@divergent_thinker 3 года назад

Think he meant a jointer for the straight edges

@larryallbritton9168 3 года назад

@@KrisDeVo I think he was referring to the glue line as to how you joint that edge. I suspect you use your table saw.

@KrisDeVo 3 года назад

@@larryallbritton9168 He did say " how you’re getting the faces of your boards jointed flush enough for the edge grain glue ups without a planer". I definitely was using a planer in the video so that makes it confusing. Also saying clean the faces of the boards for an edge grain glue up. These board were mostly edge grain boards. If hes asking about the couple of face grain boards I cleaned those up with a festool block sander after running through the table saw. If he can respond and clarify what he meant I could respond better. Hope that helps.

@YagoMelo 3 года назад

Perfeito, muito lindo seu trabalho, qual as medidas das pranchas?

@KrisDeVo 3 года назад

Thank you, 17" x 11.5" x 1"

@YagoMelo 3 года назад

@@KrisDeVo Thank - Florianópolis Brasil.

@niknabeelah7084 3 года назад

What is that purple wood? Beautiful stripes.

@KrisDeVo 3 года назад

Purple Heart is what its called.

@Randomiz500 2 года назад

As my father would have said, don't use sand before after the knife work is done :-D :-D Here meaning; "Don't put sand from the sandpaper into your planer!!.. Scrape of the glue before planing instead" :-D

@carleenglessner2108 3 года назад

Would a electric roaster work to heat and put your cutting broads in

@KrisDeVo 3 года назад

Not sure im following ya. Put the cutting board into a roaster for what?

@ronalves9118 3 года назад

Beautiful Boards, if you do not mind how many hours do you figure it took to make the 30 boards? Thank you Ron USCG RET MKC

@KrisDeVo 3 года назад

About 3hrs a board

@ronalves9118 3 года назад

@@KrisDeVo Thank you

@DreamingOfJerusalem Год назад

Where do you get your shipping boxes? I tried to find some on the USPS website and couldn't find any longer than about 14 inches?

@KrisDeVo Год назад

USPS discontinued them

@davidearman3336 10 месяцев назад

Who did you get your branding iron from?

@marbetu5394 3 года назад

These are amazing. The only problem for me is that I am in Belgium and there are no glues here that are food safe. I think it's the case in all of Europe. I might have to get some from the US, but there is a chance that the ingredients won't pass the EU regulations, and if it gets checked at the border, will I be fined. Decisions, decisions ....

@KrisDeVo 3 года назад

Much appreciated thank you! Might be worth 1 try

@artespop1 3 года назад

When a cutting board is too thin or too thick? A butcher style should be thicker? Thanks again for your time and the videos.

@KrisDeVo 3 года назад

Lots of variables with that so it would be hard to type it here. These are 1" and are kind of a standard for me. Butcher blocks should be at least 1.5" but the larger the board the thickness should increase too. The higher the build quality and techniques the thinner you can get a way with but the care of the board in the long run has a lot to do with it too. Thanks

@artespop1 3 года назад

@@KrisDeVo Interesting...thanks for the reply. Maybe a video of this topic would be great 👍

@KrisDeVo 3 года назад

@@artespop1 yeah thats a great idea. Thanks

@samcole8616 3 года назад

Can you explain what you mean by a heated wipe down. I know this is probably a stupid question but.... If the shoe fits!

@KrisDeVo 3 года назад

I heat up the Howards butcher block conditioner and apply it with a little heat with a heat gun so the waxes penetrate the wood.

@kquick901 3 года назад

where did you get your table saw insert?

@KrisDeVo 3 года назад

Amazon

@lombardave 3 года назад

It looks like you're using boards thicker than 3/4"...? I have a heck of a time finding anything thicker around here unless it's really REALLY rough sawn. Curious what you're starting out with.

@KrisDeVo 3 года назад

Its called 4/4 but its more like 15/16"

@lombardave 3 года назад

@@KrisDeVo Ah, got it! Thanks so much!

@thgenral 3 года назад

Kris, where do you buy your wood?

@KrisDeVo 3 года назад

Hardware Specialties in Anchorage Alaska

@matthewransom6469 10 месяцев назад

At the beginning of the video you said you were going to do a chaos board build video. Did you ever do that???

@Sheepdog1314 9 месяцев назад

glue really keeps the wood together? Even after washings?

@shawnmiller4572 3 года назад

can you tell me what you mean when you do a hot wipe? thanks

@KrisDeVo 3 года назад

I heat up the oil and wax in a pot and then use a heat gun when applying other coats.

@limitone9564 3 года назад

Are the glues safe for chopping food then consuming the salad/food. What kind of wood is the red?,like the color combinations.

@KrisDeVo 3 года назад

Yes very. Titebond 3 glue is FDA approved for indirect food contact (cutting boards). Thanks!

@derrickwhite6507 3 года назад

The reddish-orange wood is padauk. (Pronounced “pad OOK”)

@KrisDeVo 3 года назад

@@derrickwhite6507 Thanks! Looks like he edited and added that question. I didnt see it.

@christopheralexander8402 3 года назад

Why don't you like putting Purpleheart and Padauk together in the cutting boards? Just personal preference or is there another reason?

@KrisDeVo 3 года назад

That's funny you noticed! Yeah more of a personal preference thing. When I do put them together they do sell. I just feel they dont match well color wise and they look better being as a stand alone color in a board.

@christopheralexander8402 3 года назад

@@KrisDeVo They look amazing! Keep up the great work. Looking forward to a video on how you do the chaotic camo boards.