This is a test burn on two color painted mdf. I first sealed the MDF with a sanding sealer. Then one coat of white followed by two coats of orange and finally two coats of black. The engraving is done with a Ortur Laser Master 3.
Engrave settings:
Speed - 7000 mm/m
Power - 15% max
Dither - dither
These are affiliate links. You get a discount and I will get a commission whoopi!
Comgrow: comgrow.com?sca_ref=3863049.hf1agsrXk6
Atomstack: www.atomstack....
Wizmaker: www.wizmaker.c...
29 сен 2024