Laser Etched Leather Wallet - More Lake Art with Lasers!

Подписаться 17 тыс.

Просмотров 26 тыс.

50% 1

Remember that wallet I made on the Cricut Maker a month or two ago? I remake it in this video completely on the laser, and I use that Lake Art I have been working on. This build had a lot of challenges for me - and I share that with you as well. In the end - I think it turned out great! As always - I really appreciate the time you spend watching my channel. Thank you!
The original video where I made this on the Cricut contains links to the project, including the free template I created - and the original artwork in Affinity Designer. That video is here: • A Leather Wallet on th...
The first video in the Lake Art with Lasers series I showed one way to recreate those layered lake art pieces that I have seen some sell. I am really happy that so many people found that video helpful, and especially happy that people are starting to share their work based on it. That video is here: • Lake Art, with LASERS!
I then took that same artwork, and modified so that it would look good etched into some of those Yeti knockoff tumblers. This one goes over the rotary work as well, and that link is here: • Laser Etched Tumblers ...
Please leave any comments or questions below - happy to answer! Thanks for watching!!
Affiliate Links:
MDF I recommend for this laser: amzn.to/35B802Z
Birch Ply recommendation: amzn.to/35Dy0uJ
Laser I use in this video (slightly upgraded): amzn.to/35zsBEW
The same laser with Lightburn included (Definitely recommend): amzn.to/2KeEZD0
My laser rotary attachment: amzn.to/3oEDE7u
My air assist pump upgrade recommendation: amzn.to/2LkUZE9
Airbrush I use in this video: amzn.to/3lUY0ZG
Royalty Free Music from BenSound

Хобби

Опубликовано:

27 июн 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 51

@komcdo7838 3 года назад

Jeez, this is the most underrated RU-vid channel I've seen... I've watched a few videos and they're excellent. I love your honest experiences and trial and error as well as how detailed you are in every step. I was shocked to see only 1.3k subs... keep it up! Subscribed/alerted!

@ThisIsHowIMadeIt 3 года назад

I’m shocked too! Lol. :). Cheers!

@komcdo7838 3 года назад

@@ThisIsHowIMadeIt seems like an algorithm problem... Maybe mention keywords like cricut and K40 in the title more? That's how I first found a video of yours - the one about drawing on leather cuffs with a cricut.

@stewitruck 3 года назад

Yes I agree!! And I found you the same way my wife got a new cricut maker and I was looking up way I can use it too 😃 keep it up !

@iggidec3300 7 дней назад

What the hell are you talking about? This must be the best looking wallet I've ever seen! Even the cow it came from would have it as a wallet.

@rpesce89 12 дней назад

Good work

@sfkid57 8 месяцев назад

As someone who has been dabbling with leather crafting for longer than I'd like to admit. I really like your honesty about how hard it can be at times.

@PrinciplesMatter 8 месяцев назад

Very cool! I need plans for that jig!

@davidpopatnig8527 3 месяца назад

looks good!

@razordu30 3 года назад

Me, halfway through: Hmnn...I don't know about the brown and blue. Me, at the end: IT LOOKS AWESOME!

@sautedpickles8597 4 года назад

Love it!!!!!

@UnMakredPanic 2 года назад

Great work. very inspiring

@blcomputers-businessitsupp6089 3 года назад

Thank you, well explained and a great voice for it :)

@darylwayne611 Год назад

Awesome work! Love the video, all the best!

@bluelickleather 3 года назад

Nice leather work and excellent narration. Very impressive 👌

@avleathercraft648 2 года назад

Turned out pretty good :)

@stephen_g_cox 4 года назад

Love the blue stitching!

@ThisIsHowIMadeIt 4 года назад

Me too!! Thanks!

@williamellis8993 4 года назад

That's nice, Tim. I definitely like the brown better. Take care. Bill

@mobilecowcamp Год назад

Nice job.

@pjimpin 3 года назад

Came out great in my opinion and your video was really well done!

@ThisIsHowIMadeIt 3 года назад

Thanks!!

@stephenlane8916 2 года назад

Some good hints there I like the color scheme & the use of the potentially unused bit for the liner - one thing I would have done is make the corners & edges a bit rounder - it makes the wallet go in a pocket easier has a nicer hand feel - as I said that's what I would have done & it was all your project so I'm not being critical - I'll have a look at some more of your work thanks for the channel

@merrill07 Год назад

Way late to the show, great video. Will be watching more. What was the masking material you used while cutting out the last pieces?

@alexanderdanezis7772 6 месяцев назад

Thank you for the video and time you took to make it. How do you keep the etched area from being wiped off or losing its drawing since it's a wallet and keeps getting putt into a pocket.

@ThisIsHowIMadeIt 6 месяцев назад

On my channel I have an updated laser wallet video that does go into some of that

@SEVEN_LC 3 года назад

hey very good job and a quick question..what do you spray on that wood panel to stick the leather on it?

@ThisIsHowIMadeIt 3 года назад

Just some 3m spray adhesive...

@Beecrafty2022 Год назад

What laser equipment do you use ? Love this and finally found something easy to follow .thank u

@ThisIsHowIMadeIt Год назад

That was made on an omtech 50 watt laser.

@stewitruck 3 года назад

I know I'm a bit late. But I wonder what the effect would be if the leather was dyed before it gets etched? Or maybe I'm just missing something and being nieve.

@ThisIsHowIMadeIt 3 года назад

It’s a good question. On my next leather project I will do both and compare. I don’t know the answer :)

@garredgier1590 Год назад

Random question 2 years later...recently got a laser and have been looking into leather work with it...from my past experiences stitching and punching the holes for the stitching always seemed to be the difficult part....my question...can you use the laser to cut the stitch holes?

@ThisIsHowIMadeIt Год назад

I’m sure you can. It will likely be very dirty as you stitch…. But if you used black thread on already finished leather, I’m sure you could wipe it clean

@cameroncampbell5145 2 года назад

I watched this to figure out how to clean and finish my leather after laser. I saw how you dabbed clean but what is it you finished with to keep any remaining char from rubbing on everything?

@ThisIsHowIMadeIt 2 года назад

A dye and then a leather clear coat

@ThisIsHowIMadeIt 2 года назад

Acrylic I believe made for leather

@davidkoudela8830 3 года назад

Hello, its fantastic job, can you help me with machine on to spray paint and what paint did you use? What is the lifespan of that color? Thank you so much

@ThisIsHowIMadeIt 3 года назад

That is just leather dye, not spray paint. I use an air brush to spray it tho.

@davidkoudela8830 3 года назад

@@ThisIsHowIMadeIt Thank you. How long will it last in good quality?

@ThisIsHowIMadeIt 3 года назад

It’s been six months and it still looks great. A little dirty from use, but I still use it every day!

@gardengirl38 4 года назад

Are you taking orders yet?

@barbarabarber8531 Год назад

What kind of lazer are you using? My husband wants to buy me one for Christmas…

@ThisIsHowIMadeIt Год назад

Omtech

@workshopshift6181 Год назад

Hey! try to clean the skin with tape (adhesive tape) after laser treatment

@ThisIsHowIMadeIt Год назад

Good idea, but sometimes adhesive makes a mess with staining. I’ve started to dye and put leather balm in my projects before I laser any time I can. Makes clean up a breeze!

@sautedpickles8597 4 года назад

@RyJones 4 года назад

The source data is vectors - why not keep it vectors all the way?

@ThisIsHowIMadeIt 4 года назад

You mean do vector outlines and fills for all the images? Certainly could - but wouldn't the raster engrave be faster and a little easier?

@RyJones 4 года назад

This Is How I Made It easier, yes. Faster, maybe. I found less material distortion and heating using vector fills, and reducing fonts to single lines made them clearer. My experience is from and older K40 so perhaps time has passed me by. You’re out there making stuff, I’m just kibitzing!