LAUNCH X431 PRO ELITE. A full review and Demonstration. 

Thanks!

You are most welcome!

Yes, that is correct.

You should check out the video I made on why to never by SnapOn- It is on my main channel- Farpoint Farms

I'll see what I can do. I have some SRS diag to do.

Which one would you say is better this elite v+ or that pro3s? I just ordered the elite pro s v+ and just wanna make sure I've getting the coolest one for the price lol.

It's over 24 last time I looked.

I can't make a video on it since I don't currently work on any OBD-1 cars, but yes, you can get adaptors for the various OBD-1 connectors.

Glad I could help-

I will make a video on that this week if possible.

You should be able to with those brands-

I just looked, It is a model that is listed.

@@FarpointRestorationsAndRepairs thanks very much

It is a 2 way and it should be able to do what you need it to

While I can't say for sure on your particular car, I know that there are a lot of matching functions available with this unit.

@@FarpointRestorationsAndRepairs it's a dodge ram 1500 2006

The pro3s+ has a larger screen and a few extra features. This one has a better camera. Myself, I'd go for the pro3s+, but it may be because I've been using it longer.

This tool is better. seriously. I've tried a lot of scan tools and this is the one I grab every time.

I am not certain. Sorry!

Yes you can, that is the best part

For most cars, you'll need a programmer module. Launch sells the attachment for this tool.

Did you watch the entire video? Misfire data as well as short term and long term fuel trim are there. This tool is better than our Snap-on Zeus when it comes to coverage.

An Actron CP9690 code tester checks misfires. It's on Special tests. It's faster than the Launch.

I wish I could help you with that one. I avoid diesel work on anything post 1995 here.

Fully understandable. I wish to have any old XUD diesel in my car 🙂. I can see AdBlue reset in 7:49 but not sure if it works as I hope it works. Thank you for reply Sir!

No, that is illegal.

No, you'll need the higher end model the X431 Pro S3+

Yes.

Never tried it without wifi but it will work with all features even after the sub expires. It will simply no longer update.

My ebcm on my 04 sierra just bit the dust,I'm gonna check the grounds 1st but if I need a new one that needs programmed I wonder if this will reprogramm abs modules.

Not sure. I know the larger X431 V3S+ Pro can do programming.

@@FarpointRestorationsAndRepairs the one I just ordered does do programming on ecm and ECU but not sure if it does ebcm but I will find out when it comes and I play with it.

@@FarpointRestorationsAndRepairs mine just showed up and I updated everything..it's the v7.05.022 version and man it's got so much more than my original diagun for 2010 lol . I mean,it still works good for a lot of basic and intermediate stuff but it's a toy compared to this new one. Can't wait to try it out

@@FarpointRestorationsAndRepairs mine came with a free can fd adapter too for the new new stuff. I'm definitely gonna slowly get the add ones too

The S3+ has a larger screen and faster computer behind it.

I've only used it on one of those but I didn't have any issues with it.

Yes. Not on ever car, but on most.

Yes.

Still works fine, just no new updates.

@@FarpointRestorationsAndRepairs Alright, appreciate your response!

yes it does

You do not need to pay in order for this tool to work. I have mine on Wi-Fi, but it's not needed past startup to work on a car. The unit will work without updates. If your car has a fuel pressure sensor, this tool can read it. this tool can not do a mechanical compression test. No scan tool can since no car has a compression sensor on each cylinder.

​@@FarpointRestorationsAndRepairsCan you used a WiFi Hotspot to do a live data on this scan tool ? On a Misfire Issue can this tool do a live data on calibrations ? Can this tool scan for a bad knock Sensor?

On nearly everything!

That is illegal. No, it doesn't The only time mileage needs to be corrected is when a instrument cluster has been replaced. 90% or more of those would then need to be reprogramed (Flashed) to match the car they are in, and during the matching, the correct mileage is then flashed as well. Remember that more than one system now stores the actual milage in the car and will cause codes if you incorrectly "Correct" the milage.

I am not sure- sorry

@@FarpointRestorationsAndRepairs does it not show you?

It has key coding features, But some newer cars you need pin code.

Only Xtool can auto get pin code for key progam.

No, there is no scan tool that will allow you to bypass a required emission system. You'll need to fix the DEF system.

@@FarpointRestorationsAndRepairs Reflash ECU is possible way.

I have never heard of a clone of one of these. Try the official Kingbolen site if you are worried about it being fake. They are the importer here in the USA.

I have not, I am hoping that someone will respond to this post

Launch has an x431 all-in-one for HD trucks.

I don't know about the languages, but it can be used past the expiration date and it is worth it for sure. One of the better tools out there.

Sorry. It may have expired.

Yes, Correct.

Some but not all. It also requires additional components.

With additional requirements

Wich

Some models how can it be all models ?

Agreed. It's funny my co-worker and I were talking about the 6 or so scan tools we have between us. Both agreed that there is no one perfect tool.

Oh no- I hate scum like that

For updates, yes. To use, no. Without the subscription, the unit still works fine.

No- It is listed as the Elite pro, Sorry

It's the X431 Pro Elite.

Funny that this comment just came in literally 5 minute's after I finished filming parts 2 and 3. I'll see you again on the 26th?

Thank you sir

No, you'll need the Pro S3 for that feature.

@@FarpointRestorationsAndRepairs doses the Pro S3 do key

No idea what that means.

Kingbolen is the contact here in the USA for these global versions. I've been working with them for 3 years now and they are fast to fix any issues.

Thanks for the reply, I went to their web site, and it don't show the x431crp919bt, I going to order a Topdon ad900bt.

What country are you in? All of those features work on mine.