Тёмный

Laying and Improving Points at Chadwick Model Railway | 148. 

Chadwick Model Railway
Подписаться 72 тыс.
Просмотров 59 тыс.
50% 1

Laying Points and Slips can be problematic. Hopefully this video from Chadwick Model Railway might be help.
Patreon Link. www.patreon.com/bePatron?u=15...
Donation Link. paypal.me/ChadwickModelRailway
www.amazon.co.uk/shop/chadwic...
Amazon Links.
FFP2 Covid Face Masks amzn.to/3EI6DOS
Heat Shrink Tubing Kit amzn.to/31CPA3a
Layout Transformer amzn.to/3CuzF3g
WS Plaster Cloth amzn.to/2Zkm411
WS Smooth-it amzn.to/3aZ8IcK
WS Paving Tape amzn.to/3E7bLfv
Sculptamold amzn.to/2Wh5RGr
Digital Spirit Level amzn.to/394f1LT
Foam Cutting Pen amzn.to/3mS7Gqn
12 way Terminal Block amzn.to/39IZNd5
Plug-in Terminal Blocks amzn.to/2zjyA3L
Hand Held Vacuum Cleaner amzn.to/3dmLekg
Solder Station amzn.to/3v4BkJW
Bosch Hot Glue Gun amzn.to/2VWtK6X
Countersink Drill Combo amzn.to/2Z8R6Fj
Brother ID Sleeve Printer amzn.to/3l7xmKL
Rotacraft Screwdriver amzn.to/3esNgxB
Swiftnut amzn.to/2TZ4GJ0
Gaugemaster Track Tester amzn.to/3eAbKp0
Ferrule Crimping Tool amzn.to/2TpJ4FU
8 way Terminal Block amzn.to/2Q7NxeJ
WERA Screwdriver set amzn.to/2ZX0VJu
Magnetic Clamps amzn.to/2Nczc0y
Makita Drill amzn.to/2ZSJaLr
Cordless Dremel amzn.to/3nGb2JE
Polystyrene Cutter goo.gl/GpWgWp
Iwata Airbrush goo.gl/P1ABXd
Compressor amzn.to/2MKItc1
Com Art Paints amzn.to/2KFuDKn
Laser level amzn.to/2KRA5Y9
Helping Hand amzn.to/2qOt0Oy
Miniature Camera goo.gl/UzYWp6
Optical Visor goo.gl/ljSzBi
Magnifier Table Lamp goo.gl/seg8Dj
Fire Extinguisher amzn.to/34FEBCN
First Aid Kit amzn.to/2AhaWSk
Video Gear
Sony FDR-ax 700 4K Camcorder amzn.to/2URAYto
Lapel mic amzn.to/2ERkjtS
Zoom H1 Audio Recorder amzn.to/2O0CgKZ
Canon 80D. amzn.to/2SWUp1C
Rode Microphone. amzn.to/2E7bc84
Sony camcorder. amzn.to/2SX1Y8z
Adobe Premier Elements. amzn.to/2VfMysU

Хобби

Опубликовано:

 

2 дек 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 368   
@tmcg972
@tmcg972 2 года назад
Great video again, Charlie! Will watch this multiple times again when laying tracks. All the little tips and tricks are so useful indeed! Boxes to tick: Dremel, Glue that allows errors (Copydex), charge the hand hoover, go to gym before crawling under boards... Thank you so much!
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I’m so pleased that you enjoyed it TM. Regards Charlie
@tivednagol9127
@tivednagol9127 2 года назад
Seeing the DMU going over the slip switch was SO SATISFYING.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks TN, I’m so pleased that you enjoyed it. Regards Charlie
@derekmulready1523
@derekmulready1523 2 года назад
Everard Junction yesterday And Chadwick today ,we are definitely spoiled in How to do it Properly. 🇮🇪🇪🇺
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
That’s very kind of you to say so Derek. Regards Charlie
@philmissy1
@philmissy1 2 года назад
Shoutout to your favorite Artist. That's some artwork for the ages.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Every day is a school day Philip. Regards Charlie
@ratman0100
@ratman0100 2 года назад
Watching you lever up the slip had me holding my breath. Brave man lol. Good job as well.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I’m so pleased that you found it riveting Shane. Stay safe mate, regards Charlie
@chapelhousemodelrailway1700
@chapelhousemodelrailway1700 2 года назад
Hi Charlie, You do realise you will never get the layout finished if you keep changing things! But a good video to help us when we keep getting it wrong! Regards Mike at chapel house model railway,
@MrDavil43
@MrDavil43 2 года назад
The concept of a "finished layout" is something not found in reality! Since I "finished" mine the changes have come thick and fast. E.g. a new water tower kit became available. An area of scenery just didn't look quite right, acceptable but not right, so out it comes and is replaced. Doubtless other changes will come. My wiring is dreadful so one day I may rip it out and start again.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Please believe me gentlemen, I will finish it one day! Or at least the track work!
@johnstephens649
@johnstephens649 2 года назад
Good to see trains running at Chadwick. “Change is the only constant you can rely on” is about the only true advice I have been given. We modellers to like to keep proving this is so!
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Change is a sin, we are terrible sinners! Regards Charlie 😇
@kalpeshwani8520
@kalpeshwani8520 Год назад
Chadwick logo would be an ideal model pathway.
@ChadwickModelRailway
@ChadwickModelRailway Год назад
I shall have to have a think about that one mate. Best wishes for 2023, regards, Charlie
@alanmusicman3385
@alanmusicman3385 2 года назад
Charlie, this one's a classic in your best "how to" tradition! To see how to do these bread-and-butter layout setup/modification tasks is worth gold to us less experienced viewers. Thank you.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
That’s very kind of you to say so Alan. Regards Charlie
@evileyeball
@evileyeball 2 года назад
"I hope you found that interesting" - Charlie, I always find your videos interesting. you have no worries there.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks EEB, that’s very kind of you to say so.
@dooburt
@dooburt 2 года назад
Credit to you Charlie. You pull off the presenter role with aplomb and would shame many of those with a crew and director behind the camera.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
What heartwarming comment Chris. Regards Charlie
@Kettenhund31
@Kettenhund31 2 года назад
Well I wasn't convinced by your Copydex-method of track laying until I saw you lifting the double slip. You've given me something to think about!
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
My main reason for using it was to avoid pinning down my track with either screws or pins.Therefore reducing the noise transmission from the track into the baseboard.
@CAPNMAC82
@CAPNMAC82 2 года назад
For laying over the fiddle yards, you might want to hang an eyeball around shops that supply children's things (In the US, that would be Target or the like) and look for foam floor mats. These are a sponge foam about 25mm thick that you interlock together to cover a play floor. Thing is, these are less-expensive. Pack of 0.5m square mats is $20-25. So, nothing expensive to sweat over, like a person might with a memory-foam camping, mat, for instance.
@paulredding5864
@paulredding5864 2 года назад
Totally agree. In the UK Halfords have packs of 10 for garage use which are actually too light but perfect for model rooms and sure do save the knees and feet when standing for a while. 🙂
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
An interesting option and worth checking out. Many thanks, regards Charlie
@johneaton25
@johneaton25 2 года назад
Thanks Charlie brilliant video as per usual 👍 It’s one of those boring zzzzzzzzz’s jobs that we all have to do but at least l had your soothing voice-over running in the background as l nodded off eating my breakfast 🍳 😳😆😎
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
An interesting observation, but these difficult jobs actually need to be done in the morning as well. Regards Charlie
@robinrye3964
@robinrye3964 2 года назад
I understand the stopping device as you showed to stop the DMU by the buffer on the bay platform end when shuttling from terminus to terminus. The isolating stop at the other terminus must be a suitable distance from the buffer to allow the length of train you desire to fit in. If you send the DMU out and around the helix and back to the bay platform, the other end of the DMU approaches the buffer first and won't stop. Having the power pickups in the middle of the DMU would be the best solution then the auto stop could be about half way along the platform and all the DMU sets were of similar length. My Beatles Eurostar does an out of station run, around a loop (under the channel), past the AR-1 and back to the station. I get to enjoy the graphics on both sides! Thank you for your great videos Charlie.
@avlisk
@avlisk 2 года назад
That short piece of isolated track on the new DMU siding surely needs to be long enough to hold the entire wheelbase of a 4 axle locomotive in order to stop the train? Charlie, I need further explanation, and thank you in advance.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Every axel of my DMU has pick-ups. Therefore, I shouldn’t have a problem. However, I will be testing on Monday to check out that it stops with either car leading. Regards Charlie.
@garybeard6483
@garybeard6483 2 года назад
I learn something with almost every episode. Your fix to the broken frog wire just would not have stirred my old grey cells at all. So many thanks Charlie from both me and the landfill site that won't now feature so many ruined points!
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Don’t worry Gary, I’ve made a hash of many points before I realised that soldering to the inside of the frog was an option. Regards Charlie
@LordTechnopants
@LordTechnopants 2 года назад
I'd completely forgotten Copydex (which I think I came across at Junior School in the 70s as well as Marvin PVA) until I watched an older video of yours which gave me a rather Proustian moment when you evoked the fishy smell and the memory of it came flooding back. Watching the track work tonight with headphones on (as my better half has trundled up the wooden hill to Bedfordshire, which is odd as we live in a Bungalow), I must say that listening to a Dremel this way is just too evocative of root canal work! Nice to see the nitty gritty of changes to the layout though and I must say I am glad I invested in Anyrail some time ago. Have a great weekend Sir.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I’m so pleased that you’ve had an interesting mate. I too have a useful set of headphones! Regards Charlie
@johnthewlis8524
@johnthewlis8524 2 года назад
Wonderful inspiration Charlie, as always. However, I've been chatting with some other Charlie Bishop fans and we are agreed that we shall have to come over and HANDCUFF you whenever you have a tube of Copydex in your hand. In our humble opinions we think that you should trial run your siding and block detection with some of your locos, carriages, DMUs and wagons BEFORE committing to sticking down the points. Naughty Boy. Someone also mentioned that Margaret might supervise your vacuuming skills - you have created quite a bit of sawdust today! Lots of love to you and Margaret. Keep warm and above all keep safe and well. (On behalf of all your Patrons, Subscribers and Followers - we love you Charlie Bishop)
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
John, I’m absolutely speechless. Margaret and I both chuckled at this comment. I shall have to be a little more cautious with my glues! Regards Charlie
@downunderDSB
@downunderDSB 2 года назад
For some reason, the few seconds of you explaining end-of-the line block detection at 26:52 made more sense than many half hour videos I have watched. Thanks for that!
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Here to serve DSB. Regards Charlie
@peterhall4086
@peterhall4086 2 года назад
Another very useful video. I have just bought a house in the country, and now have a large garage that I will put the layout in. So I will have to now cut track and insert points to facilitate the growth of the layout. My current set up is 11' long, and 5' wide, and will now become a town. I will then run the railway the length of the garage, and plonk another 11x5 unit down there as another town so that I have a point to point railway with actual destinations. I will use train detectors from DCC concepts to make a block signalling system for the run, so the trains will shuttle automatically, leaving me to do the yard work and shunter puzzles.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I might hang on for awhile Peter. There is a lot more to block detection than you might be aware of. Train Controller and iTrain offer some wonderful facilities. Regards Charlie
@peterhall4086
@peterhall4086 2 года назад
@@ChadwickModelRailway I have jumped the gun there somewhat, I have the DCC concepts Legacy LM-ID detectors, several pairs, but I also use the ESU command station, and remote cab control. From reading the blurb, it seems with these detectors, I can set up shuttling with the ESU command station. We shall see if that works. I will also look at the Train Controller and iTrain as well.
@migilmor_trains_and_tips
@migilmor_trains_and_tips Год назад
Love your use of a mirror to check track and switch alignment. I use an oversized dental mirror with extendable handle. Comes in very handy in track laying.
@ChadwickModelRailway
@ChadwickModelRailway Год назад
Thanks Michael, I’m so pleased you find my little tips useful. Regards, Charlie
@migilmor_trains_and_tips
@migilmor_trains_and_tips Год назад
@@ChadwickModelRailway Definitely, Charlie. Following you from Canada.
@onnomulder9775
@onnomulder9775 2 года назад
Awesome update Charlie!! Thanks again for sharing. Cheers Onno.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
You’re most welcome mate, I’m so pleased that you enjoyed it. Regards Charlie
@wheezypalacemodels7726
@wheezypalacemodels7726 2 года назад
Hi Charlie, you make it look so easy…all the best, Chris
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks Chris, you’re too kind mate. Regards Charlie
@iangibson8997
@iangibson8997 2 года назад
Charlie, if you drill out the hole on the mounting template to the same diameter as the hole through the baseboard and push a snug fitting dowel through the baseboard hole, you can locate the template on the protruding dowel and ensure perfect alignment.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
A good point Ian, I should also just make another from plasti-card. Regards Charlie
@cythree
@cythree 2 года назад
Great video Charlie. We are all getting older, I think I would have had to sub out the under track work to the grand kids.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Yes that sounds a very sensible idea will send in the seven-year-olds!
@ianjames1352
@ianjames1352 2 года назад
Thanks for sharing Charlie. I agree if you don't get the point work right you just have a lot of derailing but some that can be caused by the backs to backs on rolling stock. If I used glue to fix the track down. I would off save all that time pinning and the continuous noise going through to the neighbours both side when I am pining track down. My late neighbour said all the time your always banging. 😀👍
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I feel for your neighbours’ pain Ian!
@martinwelsford1353
@martinwelsford1353 2 года назад
I would call that a Warts N All video Charlie as it clearly demonstrates that nothing is ever quite as easy or simple as some would tell us. Basic stuff certainly but exactly what we do with most of our track laying. So, and as usual, informative , easy to follow and that extra little spark that only you offer.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
What a heartwarming comment Martin. You’re too kind mate, regards Charlie
@richardkirk3443
@richardkirk3443 2 года назад
You do make it look easy! Copydex is of course a flashback to our collective schooldays! Thanks for the advance warning for the road trip I’ll ask the wife to prepare a packed lunch!
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
It’s great for your offer to join me Richard.
@frankhellman6879
@frankhellman6879 2 года назад
A nice example of replacing & adding on Peco track, Charlie. The only downside was that every time you used the Dremel, my teeth hurt! lol! Your plank & cover for the fiddle yard gave me an idea. I can glue some comfortable foam to plywood and some vinyl or other slippery material on top of that. Or maybe there's a nice vinyl seat pad online that would work. Good stuff!
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I had thought of gluing foam to both sides of the board Frank.
@philstrainlayout
@philstrainlayout 2 года назад
Very nice video Charlie. I don't have any under layout point motors on my layout but you make it look very simple to do.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Perhaps it looks too easy!
@gpdrummer2143
@gpdrummer2143 2 года назад
A very informative video there, Charlie. I had a lot of trouble resoldering a frog wire to one of my O gauge peco points too.... a proper mare.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Are they stainless steel, they might need a special solder.
@lilchris26
@lilchris26 2 года назад
Enjoyed your video Charlie. Something you have to watch using copydex when laying track. Do not put it near the moving parts yes but do not put it where you intend to drill a hole for you feed or frog wires. It ends up wrapped all round your drill bit, don't ask how I know this...lol
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Don’t worry mate, I’ve done it many times!
@johnodonoghue7381
@johnodonoghue7381 2 года назад
Thanks Charlie another great video , plus a drive in the next one great
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks John, it’s great to have you on-board mate. Regards Charlie
@TATICMOOR
@TATICMOOR 2 года назад
It is good to see a well-designed track plan still getting a mod done here and there. Especially as other ideas or problems become known further into the build. This is a good example of one of those times and handled with the knowledge that things can be changed later without too much hassle. Well, if one doesn't count getting in and out of small tight spots under the baseboards. Thank goodness for us you are not a true cultural Scotsman who likes to wear Kilts, LOL. Non the less an excellent work out for you and on the layout to enhance train movement.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I’m so pleased that you enjoyed it John, even my own “work out”. Regards Charlie.
@impostorsmith3417
@impostorsmith3417 2 года назад
I agree with those below Charlie, as usual, the video is informative, entertaining and helpful. But there's no such think as a "Frog" in railway track speak, it's called a "Common Crossing".
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Why on earth do we adopt this useless terms! Regards Charlie
@impostorsmith3417
@impostorsmith3417 2 года назад
@@ChadwickModelRailway I really don't know, but it must drive a PW man crazy.
@peterainsworth8466
@peterainsworth8466 2 года назад
Great work Charlie. There's something about your videos that makes them so enjoyable. Thank you.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
That’s very kind of you to say so Peter. Regards Charlie
@williamburgess2876
@williamburgess2876 2 года назад
Merry Christmas Charlie and family and a Happy and prosperous New Year. Please keep up the great work, it’s keeping me sane. All the very best Billy .
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
You're too kind William, have a great Christmas, regards Charlie
@peterjones7673
@peterjones7673 2 года назад
Another spot on video Charlie, concise and easy to understand, thanks
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks Peter, so kind of you to say so. Regards Charlie
@nolanknoepfle8044
@nolanknoepfle8044 2 года назад
Track work sure runs smoothly
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks mate, regards Charlie
@Accessibility-Track-Chris-Law
@Accessibility-Track-Chris-Law 2 года назад
Circuitron are now making a tortoise with integrated decoder, which helps reduce clutter on the undeside (a higher price per unit but no need for separate DS64 controller if on digitrax). I've installed my first 3 of umpteen and I can wholehartedly agree with your quote: "Good point work is hard work". There's a lot of extra stuff to figure out that's not in the instructions for the point motors. I ended up buying piano wire to replace the actuation bar/wire on the point motor because the points weren't fully closing (look up youtube videos on this subject if you're having the same problem). Good vid as always, Charlie. Keep up the great work!
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I have done exactly the same Chris. The hole needed drilling out a bit on the drive mechanism though. I believe the new ones are "Snails", very apt. Regards Charlie
@Accessibility-Track-Chris-Law
@Accessibility-Track-Chris-Law 2 года назад
@@ChadwickModelRailway Yes... Snail in logo but 'Smail' in name (Slow Motion Actuator with Integrated Logic). I'm guessing this was a name they came up with over a beer or two. The piano wire is sold by some model railroading outlets, but it's just as easy to order from a piano servicing outlet. Rolled up wire needed straightening with a drill and vice, which was fun.
@alanmusicman3385
@alanmusicman3385 2 года назад
Yes, I was poised to buy a load of Tortoise motors but spotted the DCC Concepts Cobalt IP which - like the one Chris mentions - has a built in decoder which makes the whole solution a lot more elegant and overall the price comes out around the same due to not having to have separate decoders. Been testing it and all seems well - so going that route now.
@CAPNMAC82
@CAPNMAC82 2 года назад
I have an associate who spends time swearing at his track planning software program. That's because is has a train simulator as well. Which is meant to be so you can test Operations on your layout. But, if you are keen to Operate, and the track is not all glued down, you can run trains right on your computer. Which means you are not gluing anymore track down . . . Hence the swearing.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Sounds like a happy medium (or perhaps not)!
@chasc301
@chasc301 2 года назад
Excellent step by step coverage as always Charlie, many thanks. Your videos have a very high standard of lighting and the sound is also very good, making for absorbing and clear presentation. The layout is a work of engineering art.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
What a heartwarming comment Chas, you’re too kind. Regards Charlie.
@Gus-jb8cm
@Gus-jb8cm 2 года назад
Nice work Charlie, likewise with others. Lots of details so hopefully will use if I ever start a new layout.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks Gus, I’m so pleased that you enjoyed it.
@harperlarry49
@harperlarry49 2 года назад
Very nice work. Taking your time and doing it right does make for more enjoyable operations. Thanks for sharing. Cheers - Larry.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks Larry, that’s very kind of you to say so. Regards Charlie
@jedlahaye4765
@jedlahaye4765 2 года назад
Great video Charlie, changing points in existing trackwork is always a challenge and as you said the changes add to the realism, many thanks from down under in Wairoa New Zealand
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I’m so pleased that you enjoyed it Jed. Stay safe mate, regards Charlie
@kevinenticott2206
@kevinenticott2206 2 года назад
Thanks Charlie another enthralling episode full of useful and inspired information, coming along very nicely 👍
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks Kevin, is very kind of you to say so mate. Regards Charlie
@thelibrarian46
@thelibrarian46 2 года назад
Excellent video Tony. I admire the way you are able to carefully line up the rails following replacing the points. I cannot wait to see what it will all look like once the station is finished.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I think we’re both looking forward to that day Alan. Regards Charlie
@redbank542
@redbank542 2 года назад
Good stuff Charlie. My Grandson is going to join up all my bus wires as he’s much more agile than I !
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Is he for hire? Regards Charlie
@redbank542
@redbank542 2 года назад
@@ChadwickModelRailway 😂😂😂😂😂😂
@Southcoaster377
@Southcoaster377 2 года назад
Another excellent video Charlie. I had wondered how I will eventually fit small sections of track or make modifications, and this has shown me how.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
That’s great David, I’m so pleased that you found it useful.
@gavinmccall7179
@gavinmccall7179 2 года назад
Great to see how to change in-situ points! Also, good to see the progress on the fiddle yard!!
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I’m so pleased that you found it interesting Gavin. Regards Charlie
@DarkLord8888
@DarkLord8888 2 года назад
Hello Charlie, Great video as always! I agree 100% that point work is hard work and a something which can quite literally break a layout. I liked your reference to the flow of coaches over points, have seen some layouts in the past, where indeed the flow seemed a little odd, and it is one of those things when you see it, you can't unsee it! It is great seeing how Chadwick has evolved and is still evolving and looking forward to the next video! Stay safe & keep up the good work!! Derek.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
That’s very kind of you to say so Derek. Regards Charlie
@knottyal2428
@knottyal2428 2 года назад
Hi Charlie, so amazed to see you using my tip about the mirror! And what a clever hint about the fishplate engagement...... we've all had that struggle, especially in N gauge. Merry Christmas everyone and stay safe folks! Alan.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
So glad you’re keeping me on my toes Alan. Regards Charlie
@rzholland
@rzholland 2 года назад
You do the same as me, running your finger over the joint to see if the fishplates are on properly and the top of the rail is smooth. Except in my case it is generally followed by f***k as they don't!
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
We’ve all done it Robin.
@simonderry697
@simonderry697 2 года назад
Another great video Charlie, one day when I start a layout I'll refer to these with all your helpful advice, brilliant 👏
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I’m so pleased that you found it interesting Simon.
@alanhaynes4576
@alanhaynes4576 2 года назад
Thanks Charlie for another great video
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks Alan, I’m so pleased you enjoyed it mate. Regards Charlie
@zodzod9378
@zodzod9378 2 года назад
Bloody good show Charlie never easy but gives us all on your great channel a heads up and that's a good thing thanks mate ! John from Chichester.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks John, I’m so pleased that you found it interesting.
@OgaugeTrainsplusslotCars
@OgaugeTrainsplusslotCars 2 года назад
Thanks for sharing.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Anytime mate.
@Mooresbytube1
@Mooresbytube1 2 года назад
Another excellent video Charlie - I wish I’d seen this before I did the point work at Tileford!
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Perhaps it’s still not too late! Regards Charlie.
@tonyhill6296
@tonyhill6296 2 года назад
Hi Charlie, We all enjoy your great presentations and however experienced one may be its never too late to be reminded of the best tips and methods to use. I moved over to using ‘Copydex’ about 6 years ago and have reaped the benefits, with the need to vary some track configurations on my amended layout, after the house move in 2021. When I’m weighing down newly installed track and points I use three or four oblong shaped ‘failed’ laptop batteries along the run of track on top of a 5mm ply strip. This avoids using the more precious books, for the 1/2 hour or so needed for the glue to set. Just an idea that works for me! Your videos have inspired me to install a helix too with great design advice & support from your preferred supplier. Happy Modelling, T🚂
@Mitche01
@Mitche01 2 года назад
Hi Charlie, I find you and Richard from Everard Junction to be 2 of the most informative and dare I say useful people when it comes to model railways. I recently have come back to my old Hornby DC models I had when I was a child (and now my 5 year old son is fascinated by them too). I am gearing up to start a loft layout and have been using yours and Richards videos to build up my knowledge and confidnce to begin. Thanks for the work!
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
That’s great news. Hopefully building it together with your son will be a terrific bonding mechanism. Regards Charlie.
@worthingtonmodelrailway8628
@worthingtonmodelrailway8628 2 года назад
Charlie, you make it look easy, which it isn't (unless I'm doing it all wrong, LOL). I too have discovered a bigger throw hole helps with tortoise point motors. I think the wiring is the easy bit, but getting the throw to work right is my biggest issue, I've found the template isn't always right, and have started to put double sided sticky tape on the top of tortoise as I maneuver it into place before screwing it down.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I interesting option mate. Regards Charlie
@Hanzo.Azmodan
@Hanzo.Azmodan 2 года назад
Another good information video Charlie. Merry Christmas to you and yours.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks Mike and let’s hope we all have a great Christmas.
@lynganddistrict
@lynganddistrict 2 года назад
Found this video very beneficial, thank you Charlie. I am in the process of changing my double slip as well, as I made the beginners' mistake of using the small points which de rail more often than not. As my layout is N gauge its a tad more fiddly but with new medium and large points and a re adjusting of the line I'm hoping it will work much better. Thanks again for a timely video.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I’m so pleased that you found it useful mate. Regards Charlie
@kalpeshwani8520
@kalpeshwani8520 Год назад
Lots of time and effort 👍👍👍👍👍👍
@ChadwickModelRailway
@ChadwickModelRailway Год назад
Thanks KW, much appreciated, regards, Charlie
@thegrowler-blackwoodngauge
@thegrowler-blackwoodngauge 2 года назад
Enjoyable as always Charlie. Your right about getting points laid properly which is even more important in the smaller scales. Where would we be without copydex - I've used it to lay my track on the two Helixes I've just installed on my own layout - godsend as so easy to lift if the track needed adjustments - downside is the smell lol. Take care. Cheers Euan
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I’m with you on this one Euan. Rubberise glues bring a great deal to the hobby. Regards Charlie
@richardandrews6754
@richardandrews6754 2 года назад
Hi Charlie, excellent video now the track is down your modification makes perfect sense. should look rally good with the platforms in place and the surrounding scenery. A always stay safe
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks Richard, that’s very kind of you to say so mate. Regards Charlie
@markosolowey5887
@markosolowey5887 2 года назад
Great work Charlie
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks Marko
@stephenpike3147
@stephenpike3147 2 года назад
Nice to watch someone have a good work out - yet another skill to learn in this hobby! One hundred percent with you on getting the track right and using medium or large radii where you can, it's always space permitting. Surprised you didn't, weight the track whilst glue going off. Very helpful video and nice rewarding tweaks to your layout. Stephen
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks Stephen, I’m so pleased that you found it interesting mate. Regards Charlie
@barryturner2916
@barryturner2916 2 года назад
Spot on with your comments Charlie, "good point work". I feel for you working under the base boards I am currently having issues with knees and shoulder (getting older not all its cracked out to be lol). Thanks for sharing a pleasure to watch, please take care and stay safe..
@paulypyro
@paulypyro 2 года назад
agree with the getting older bit lol, it's a real pain !!
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
At last, people that agree with me, age is no joke.
@bertoverweel6588
@bertoverweel6588 2 года назад
Great job Charlie !!
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks Bert, regards Charlie
@CockneyRooster
@CockneyRooster 2 месяца назад
Your Point videos are helping no end mate cheers
@ChadwickModelRailway
@ChadwickModelRailway 2 месяца назад
That’s great news CR. Regards Charlie
@alancope9962
@alancope9962 2 года назад
Loved this one Charlie, I do like it when you are chopping track. It's when you crawl under the base board you realize you should have started 20 years ago, :)
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Changing your mind is a dreadful attribute. Regards Charlie
@alancope9962
@alancope9962 2 года назад
@@ChadwickModelRailway You know what they say Charlie, to err is human, to foul things up completely requires a computer
@paulredding5864
@paulredding5864 2 года назад
As always, very informative and relaxing video Charlie. When I set out building the UK outline section of my layout, trying to run before I could walk, I combined SMP track with Code 75 Peco turnouts and double-slips. The end result was very nice BUT the work involved getting the rail height perfectly aligned was fun (not). My mental approach became one of the mantra that in real life, track laying isnt a 5 minute exercise, so I took my time and did it properly, getting into a rhythm over time (I even watched some of the BMF 'Points Arising' episodes on DVD for relaxation and to get some inspiration. For the continental side of my layout, I went straight to Fleischmann Profi track!. Cheers
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I couldn’t agree more Paul. Track and point laying is never as simple as people might think. I tend to do the difficult bits in the morning when I’m more focused. Regards Charlie
@bobhordern5139
@bobhordern5139 2 года назад
Hi Charlie, good beginner's videos always worth airing. When you tested the Tortoise on the crossover only the new point moved. I would tend to make these simple crossovers points operate together (I guess it's because I use a panel rather than the controller for accessories) kutgw, Bob
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
You’re right Bob and they will operate as a pair.
@ngaugefouroaksstreetstatio6932
@ngaugefouroaksstreetstatio6932 2 года назад
Very informative, I have only one medium point the other 36 are all long radius but you need space.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
And with it comes reliability.
@alexmorgan2296
@alexmorgan2296 2 года назад
A great deal of skill (and patience!) is involved to make this all look relatively simple, but it is really useful to see how it should be done. As said by others, shall keep this very close at hand when attempting to replicate. Thanks, as ever, for the guidance.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
That’s very kind of you to say so Alex.
@plot1184
@plot1184 2 года назад
Interesting video about optimizing your layout. This segment feels indeed more interesting. Oh and I'm really looking forward to another roadtrip 😁
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I’m so pleased that you enjoyed it P1184. I’m out on a recce tomorrow to see what the subject holds.
@graemepalmer275
@graemepalmer275 2 года назад
Evening Charlie, many thanks for your help. I have now subscribed to your channel. GP Albany WA Australia
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Welcome aboard Graeme. Regards Charlie
@paulwilson3083
@paulwilson3083 2 года назад
Thank you again for another good humoured and interesting presentation Charlie, have you ever considered putting a trackbed next to the bay line at platform 3, it would give the impression that there was once a line there to run round the branch train in steam days and before DMUs, it could have a trackless dirty ballast look which was a common site with track rationalisation, just an idea for the small space by the side of the incline, please take this as an idea and not interference Charlie as I rate your layout and ideas very highly, take care and looking forward to your next presentation.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I have other plans for that area Paul! I shall leave you in suspense, regards Charlie
@paulwilson3083
@paulwilson3083 2 года назад
@@ChadwickModelRailway Ha Ha, shall look forward to that Charlie, keep up the good work.
@martynbuzzing3327
@martynbuzzing3327 2 года назад
“Lovely”. 😂. Very interesting. Thanks.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks Martyn, I’m so pleased you enjoyed it
@TheDaf95xf
@TheDaf95xf 2 года назад
Evening Charlie. Was that a little picture from your grandchildren in the background 😀 Yes good track work is essential for smooth running as you’ve just demonstrated with the DMU and the Pullman 😃 My layout has been pulled up yet again as we’re moving house on Friday 🙄 On a positive note I’ve got the west coast main line in my back garden just north of Preston. So real trains every day lol 😆 Looking forward to your next trip out Charlie 😀 Take care as always cheers Stevie.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Hi Stevie, actually the drawings are from the children of Subscriber. We met up at the South Devon Railway earlier this year and had a great steam ride together. Regards Charlie
@graham33freeland59
@graham33freeland59 2 года назад
Great video Charlie...I did the same on my layout but you made it look so easy. I always seem to damage the insulating fishplates which is a pain.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Perhaps you should’ve watched the time on my watch and figured out how long it really took, the best part of three days!. Regards Charlie
@jeffjones6107
@jeffjones6107 2 года назад
Great video to watch Charlie enjoyed it 👍
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks Jeff, regards Charlie
@mels1811
@mels1811 2 года назад
Awesome video
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks Mels. Regards Charlie
@auxie22
@auxie22 2 года назад
Great Video as always Charlie!
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks A22, you’re too kind mate. Regards Charlie.
@dakdak7609
@dakdak7609 2 года назад
More interesting and informative stuff! Thanks. I have seen various options for running the wires and bus at the front / on the front fascia for disabled / OAP access. But that never fixes the point motor issue. Perhaps you can solve that for all of us over the next few years!!
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
The only other option is to hide them in buildings or hillsides. Mine would end up like Snowdonia! Regards Charlie
@steveweatherly1965
@steveweatherly1965 2 года назад
Just a little note, when the points are in the turned position and then you switch one to a straight your leaving the other still in the turned, if a train comes down the main line and hits the turned point it will derail on the point you have set straight. I've noticed in Aust that there is never any way 2 trains can collide as of there's a turn out then the up and down lines are both turned out and the same as straight. Also on that new bit you replaced why not do away with seperate controlled points and wire the 2 off the same circuit, as my advice above it will then make the station down line available and if your running into the parcels area then making it straight also makes your mainline straight, no chance of collision. I'm sure your block detection would prevent it from happening but in the real world these points both would be straight. Love the videos you post, makes every 2nd Saturday morning entertaining
@KevTheBusDriver
@KevTheBusDriver 2 года назад
I agree entirely - my N gauge layout has any turnouts/points which form a crossover wired so the motors change together. Also simplifies the control panel. Excellent video, mind!
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I totally agree gentlemen. However, I can’t use the same channel on the Digitrax DS64 as it’s used for feedback. But rest assured they will be switched as a pair.
@anfieldroadlayoutintheloft5204
@anfieldroadlayoutintheloft5204 2 года назад
nice update vid keep up the good vids thanks lee
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks Lee, I’m so pleased that you enjoyed it.
@howardavins9234
@howardavins9234 2 года назад
Well done again Charlie Always little tips to make things a little easier. Sympathize with getting under the board! No easy hints for getting back out? Many thanks Howard
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
At least the boards can be maintained without hiring a 7 year old to do it for me. Age is a terrible curse!
@davidoickle1778
@davidoickle1778 2 года назад
@@ChadwickModelRailway well said, Charlie! Ha Ha
@1tonyboat
@1tonyboat 2 года назад
I think Charlie should design a person lift for all us oldies , I'd make one 😂😂
@Southcoaster377
@Southcoaster377 2 года назад
@@ChadwickModelRailway Having just trapped a nerve in my back working on baseboards, I can completely agree with the comment about old age.
@gordonhanning476
@gordonhanning476 2 года назад
Great video Charlie. Funny thing is I am modifying my points at the moment. Timing couldn't be better.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Clever minds think alike Gordon!
@ronduz1281
@ronduz1281 2 года назад
👍👍👍Great video Charlie
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks Ron, regards Charlie
@patrickhunt8644
@patrickhunt8644 2 года назад
Just checked the upper class pronunciation of Heljan - it's 'Hell Jan'....! :-) Billy Connolly does a great sketch about middle class pretentiousness!!! More seriously, great informative video, as always.
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I’m so pleased you enjoyed it Patrick. Regards Charlie
@SuperRobertwillis
@SuperRobertwillis 2 года назад
Amazing vlog Charlie Amazing 😂😂😂💕💕
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks Robert, that’s very kind of you to say so.
@michaelimpey1407
@michaelimpey1407 2 года назад
Charlie, Thank you, another interesting video full of tips. I really like the use of the mirror to check the other side of the track. I would have no hope of getting in, or out of under your track. You still have some flexibility left. Well done, and stay safe, Michael
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks Michael, sadly none of us are as flexible as we used to be! The limbo dancing days are long gone.
@paulnewton737
@paulnewton737 2 года назад
@@ChadwickModelRailway I don't know Charlie, you could still make a pretty good go at it! Who knew railway modelling could be so exercising 😂
@jamesb8837
@jamesb8837 2 года назад
Rivetting stuff Charlie, you make complex things doable, (is that a word? ) for the less switched on amongst us. Keep up the good work buddy and as it is that time again, Merry Christmas to you and yours, stay safe. Who knows, Santa may bring you additions to your stock. :).
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Thanks James, that's most kind and I do hope that you and your folks have a great Christmas.
@colinmeredith7114
@colinmeredith7114 7 месяцев назад
I suppose the paper template could be taped to a piece of plastic and marked/drilled accordingly. BTW RS auto' wire strippers are available in three options, the larger for bigger wires and collections of wire/cables. Silly cost though!
@ChadwickModelRailway
@ChadwickModelRailway 7 месяцев назад
Thanks Colin, although you could say that the wire strippers are priced according to their quality. Regards, Charlie
@charlemontparkway00gaugemo31
@charlemontparkway00gaugemo31 2 года назад
I can just imagine you on xmas day ready to carve the turkey.............. now where's that dremel 😀😀😀👍 another great informative upload Charlie . Atb phil @ charlemont Parkway 👍👍
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
I must confess Phil, I laughed out loud at that one. Regards Charlie
@bryanlane62
@bryanlane62 2 года назад
Thanks Charlie, some good tips there. I use DCC Concepts Cobalt iP Digital point motors at Pevenbourne, one of the “challenges” (aka problems !) I have is getting the holes in exactly the right place to fix the motors under the board. I think I’m going to try and make a template like the one from Tortoise as there doesn’t seem to be an equivalent for the Cobalt iP Digital motors. Take care Charlie, looking forward to seeing where we’re going in the car next week !
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
Good idea Bryan. Perhaps a thin Plasti-card template would serve you well. Regards Charlie
@scottb1167
@scottb1167 2 года назад
There is one, it is part of DCW-TMP2. However a bit pricy for the kit so I made mine out of a clear CD case cover Bryan. I lay it on top of the point and drill four holes down from the top. Simple case of then going under the board and screwing the motor in place. No faffing about under the board. If you scribe a centre line on the clear plastic as well it ensures that the four holes are bang square, not so easy to do from the underside.
@bryanlane62
@bryanlane62 2 года назад
@@scottb1167 Thanks for that Scott. That’s a great idea, I’ve got some old CD Cases, I’ll give that a go. And that’s exactly what I was thinking to do, drill down from above using a vertical drill guide to make sure the holes stay true, hopefully then just a simple case to screw the point motor under the board and get it better aligned than what I’ve been able to achieve working upside down !
@dgl5439
@dgl5439 2 года назад
Charlie, next time you need to work, laying on the lower layer, I suggest you raise the plywood board an inch or so, so it's not laying directly on your trackwork. Fantastic job, as always!
@ChadwickModelRailway
@ChadwickModelRailway 2 года назад
But then what goes between the baseboard and the plywood sheet?
@dgl5439
@dgl5439 2 года назад
@@ChadwickModelRailway 1/2 inch plywood (or however thick is required to raise above rail top) - it sits in the places between the tracks, and raises the main "bed" above the tracks. You'd need 3, about 1 inch wide I'd think - one front, one back and one towards the middle.
@AntonioLopes-on4pe
@AntonioLopes-on4pe Год назад
Hi, great video. Thanks for sharing Charlie. Just one small comment on the double slip switch removal. I had to dismantle quite some points on my layout, because I riped off an entire section, to build a larger one. Don't know if this works wih Copydex, but before using the spatula underneath the point, I soak it with isopropyl alcohol. In my case, I'm using a kind of general purpose construction glue, typically known as "liquid nails". It gives a good bond, but it softens enough to lift out the point (or any other type of track of course), without too much effort or stress. Cheers, António
@ChadwickModelRailway
@ChadwickModelRailway Год назад
I’m so pleased that you enjoyed the video Antonio, and thanks for the tip regarding lifting the points. Regards Charlie
Далее
Accurascale Class 60 - A Closer Look
14:35
Просмотров 10 тыс.
Adding leaves and static grass to our layout!!!
23:50
МОЖНО ЛИ ОДЕТЬСЯ ЗА 1000₽?
0:44
Просмотров 1,1 млн
🍁 Разные взгляды
0:15
Просмотров 8 млн
Этот Малыш Очень Умён 😂
0:20
Looks realistic #tiktok
0:22
Просмотров 47 млн