Тёмный

Lazer Lamps VW Crafter Install. Adventure Van Build 

Van Family Adventures
Подписаться 2 тыс.
Просмотров 3,8 тыс.
50% 1

In this video I install the Lazer Lamps in our 2020 VW crafter as part of our off grid adventure camper van build. This is a plug and play install kit but does require a some modification with the Transporter HQ LED lights.
/AD Thanks to Venture 4x4 Group for the supply and advice on the lights. Venture 4x4 supply off road equipment not just for Land Rovers and Discoveries but also a wide range of commercial vans and campers built for adventure. Check out their website here: venture4x4.co.uk/
Disclaimer: I am not an auto electrician, any modifications you make off the back of this video are your own, this is just the way I have done it.
For more videos and updates on our camper van build please like and subscribe.
__
Follow our adventures:
✩ Instagram - / t5_family_adventures
✩ TikTok - / t5familyadventures
✩ Facebook - / t5_family_adventures-1...
__
Our Top Camping Gear:
My Collapz Bucket: amzn.to/4cq0kRm
Tribit Stormbox Bluetooth Speaker: amzn.to/3RvXtOS
Ridgemonkey Sandwich Toaster: amzn.to/3RvXtOS
Window Vac: amzn.to/3RvXtOS
Firemaple X2 Portable Gas Stove: amzn.to/3RvXtOS
Cadac Cook 2 Pro 2 Stove: amzn.to/3VvBMPM
__
My Camera Gear:
Canon M6 | amzn.to/2Jco01p
Sigma 16mm EFM | amzn.to/2XJq229
Canon EFM 11-22mm | amzn.to/2LfaicU
GoPro Hero 12 Black | amzn.to/3RxHb7M
DJI Mini 3 Pro | amzn.to/3RrT6UD
Rode Video Mic Pro | amzn.to/37Y6A3l
Joby Gorilla Pod | amzn.to/2y5OVDc
Some links in this description are affiliate links. When you buy through these links, I get a small commission & you don't have any additional costs. - Thanks for your support.

Авто/Мото

Опубликовано:

 

10 янв 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 17   
@mos_adventure_van
@mos_adventure_van 37 минут назад
One of my favourite Lazer products buddy, great vid 👏🏼
@VanFamilyAdventures
@VanFamilyAdventures 20 минут назад
Thanks Bud! They are mega down the green lanes 🤘 Thanks for watching.
@mos_adventure_van
@mos_adventure_van 12 минут назад
@@VanFamilyAdventures like the 12v supply in the engine bay, super handy. You could add a midi fuse in and remove the lazer spade fuse totally. Just a thought 👍🏻
@carolspencer5844
@carolspencer5844 2 месяца назад
Thanks for this very easy guide. It made fitting my lights so easy. Cheers.
@VanFamilyAdventures
@VanFamilyAdventures 23 минуты назад
Glad it helped
@paul__burrows
@paul__burrows 5 месяцев назад
Great work Chris. The difference they make is night and day!
@VanFamilyAdventures
@VanFamilyAdventures 5 месяцев назад
Literally daylight, at night ✌️ Hope you’re well bud?
@Rs500ybd
@Rs500ybd 2 месяца назад
Master Auto Lec here What has Gone Down here is fine. I Would Locate the Feeds in the Dash then Run The Switching feeds out to Contactor (Relay) Then To Position Light. I am not a fan of Opening up The Loom To The Headlights because if Not Done To Spec This Will allow Water& Dust to Get In To The Loom sends the can Mental........ Nice
@VanFamilyAdventures
@VanFamilyAdventures 20 минут назад
Thanks for the feedback. It's all secure and away from moisture / dust.
@shanewaller2864
@shanewaller2864 5 месяцев назад
Hi Chris I have the Lazer lights fitted to my grille of my Van haven built t6.1 2022 204 dsg TTX lwb highline kombi camper swamper transporter, I have the factory LED head lights and also a 52 inch LED curved roof light bar ,I also have the Lazer utility 25 lamps fitted to the rear of my transporter on the roof to aid with reversing and also to illuminate the area behind the van when working at night .Lazer lamps are not cheap but they make the best lights ,so you gets what you pay for and the visibility at night is just mind blowing 🤟
@VanFamilyAdventures
@VanFamilyAdventures 19 минут назад
Mega build bud 🔥
@eddy802
@eddy802 3 месяца назад
Do they ‘just work’ if wired as you did but on a setup that has ‘headlight assist’ (or whatever it’s called - auto dipping for oncoming traffic etc)?
@VanFamilyAdventures
@VanFamilyAdventures 3 месяца назад
Unsure but if you use CANbus it should work (in theory)
@eddy802
@eddy802 3 месяца назад
How did you decide the widthways spacing within the grill?
@VanFamilyAdventures
@VanFamilyAdventures 3 месяца назад
The 3D molds they provide can only fit in one place using the vertical supports so you can’t really get it wrong.
@urbanarkoverland
@urbanarkoverland 5 месяцев назад
Let there be light
@VanFamilyAdventures
@VanFamilyAdventures 5 месяцев назад
🔥🔥🔥
Далее
I Built 100 Houses And Gave Them Away!
09:36
Просмотров 61 млн
VW Crafter Bonnet Light’s & Brackets Upgrade
10:42
Просмотров 11 тыс.
VW Crafter Part 9 Colour Coded Bumpers
6:16
Просмотров 1,1 тыс.
LAZER LAMPS | Standard vs. Elite - Triple-R Range
1:39
Campervan Modification DIY
10:18
Просмотров 4,8 тыс.
РЕМОНТ ДОРОГ В ШВЕЙЦАРИИ
0:17