In this video, i wanted to share you, how to choose the Leaderfins fins. How to choose softness for you and what material to choose, Fiberglass, Carbon Fiber or real carbon. Im sorry for mine english if it will break your ear.
I am 177cm tall and 80kg, but I have extra fat. Normally I should be around 75kg (mabey a bit less). I am thinking of getting 80cm or 70cm fins pure carbon with the protective film to preserve the design. The angle I will choose will be 20 degrees and the foot pocket I will choose will be the forza. (my feet are 27.5cm so I think the 43-44 size will be good with 2mm socks). I will use them for freediving mainly, I don't care that much about surface swimming. My leg power is normal (not too strong but not weak either). So I am scared that if I get the soft they may be too soft and not very reactive, and that if I get the medium they might be too stiff and tiring on my feet. Could you please help me out and give me a suggestion of what stiffness is best to buy for my case?
Hi guys!!! I have a question for you. I just bought a pair of short blades (60cm long). They are pure carbon fins blades from Leaderfins. I have 76 kilos and I was recommended to get medium stiffness to use for recreational freediving and spearfishing. I found the blades way too hard. This is normal when the blades are shorter?
I am really in the middle to chose between a soft and a medium stiffness. I'm currently 73kg. Everyone says I should go Medium because I'm a Spearo but I tried a Medium fins from a friend and thought they were too hard for me but it's because I'm used to plastic fins which are very soft and not responsive. he said I would get used to it.. what do you guys think?
I am already waiting for my pure carbon fins to arrive. But I’m worried because I read somewhere that fiberglass is stronger than pure carbon. 🥺 mostly, I’ll be diving along coral reefs. Would i be safe from breakage due to accidental striking in stones or corals?
can you make a review how hard or soft the hard, medium, soft fin? so we can choose what's best to use.. me, I have strong kick, so my idea is medium or hard fin..but not sure, how hard the medium fin, or how hard the hard fin..tnx
I've been using medium/hard fiberglass Spearmasters, and just switched to soft DiveR. I have say, I think I get as much or more propulsion for the amount of effort from the soft DiveR's. I've only used them once so far, but they really feel good. I haven't been diving for months and didn't cramp up. If I had used my Spearmasters, I probably would have cramped. I think the soft fin is more efficient.
Some say it marginally affects effectiveness (hydrodynamics?). But Leaderfins writes: «The addition of Anti-Scratch blade protection does not affect the stiffness of the blades or their overall performance.»
@@Eurodiveshop Понял спасибо, насчёт отверстий не соглашусь так покупал лопости c4 red falcon и они идут с отверстиями и подходят под многие калоши, установил их в марез всё встало как в литую.
@@Eurodiveshop извените я там смотрел вообще не пойму где искать сэнвич !!! Скажите пожалуйста сколько хоть они примерно цену на них . Есть такие как виде карбона?
can you make a review how hard or soft the hard, medium, soft fin? so we can choose what's best to use.. me, I have strong kick, so my idea is medium or hard fin..but not sure, how hard the medium fin, or how hard the hard fin..tnx