Leaking Windshield Gasket: 1992 Jeep YJ Cowl Gasket

Подписаться 81 тыс.

Просмотров 18 тыс.

50% 1

1987-1995 Jeep Wrangler YJ Windshield cowl gasket: amzn.to/3JsmOG3
Proudly sponsored by Enginetech enginetech.com/
Engine rebuild kit I used on my 4.0L rebuild: amzn.to/2WuNdbu
If my videos have helped you save some money , and you would like to give back to the JeepSolid Garage, consider joining my Patreon page!! There's no obligation though. I am happy to help others out, but it does take a lot of my time.
/ jeepsolid
👨‍🔧 A few of my favorite tools 👇
Pro-Lift 3ton Jack Stand: amzn.to/2RU6rGa
Pro-Lift 6ton Jack Stand: amzn.to/33R9epj
3 Ton Jack: amzn.to/2S5obyJ
Milwaukee 3/8 Cordless Ratchet: amzn.to/39x7WAO
Extendable Socket Wrench: amzn.to/2LJNV2k
1/2" Craftsman Impact Driver. amzn.to/2fTDoTR
24" Breaker Bar: amzn.to/2RnuSNC
Craftsman Torque Wrench: amzn.to/2Wj7JiD
Dewalt 1/4 impact driver: amzn.to/2GYEJ4w
Be sure to get the kit with 2 batteries. You'll be glad you did!
Craftsman 165 Mechanics Tool Set: amzn.to/2GXRlIg
Excellent tool set that will last a lifetime.
Oil filter Wrench: amzn.to/2IbgT9e
Large Capacity Oil Drain Pan: amzn.to/2OjqXjh
Subscribe: / jeepsolid
Follow Me!!
Facebook: / watchjeepsolid
Instagram: / jeepsolid
Twitter: / dale_jeepsolid
Professional business inquires: email me at dale@jeepsolid.com
#jeep #jeepwrangler #jeeprepair
Some of the links provided are affiliate links, where I earn a very very very small commission for directing you to the website. If you make a purchase, it does not increase your cost, but helps me fund my channel. Thanks for watching JeepSolid. I am not a certified mechanic, just a hobbyist who enjoys working on Jeeps.

Авто/Мото

Опубликовано:

22 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@AHMHIRA786 27 дней назад

Thank you Sir for helping me out with this video to replace the windshield gasket. But there were more stuff I had to remove, like the both sides visors and side moldings. 👍🏻🤙🏻 From Redondo Beach, Los Angeles, California.

@davidmills1639 Год назад

We just purchased a completely stock 95 YJ from a family member in CA, that has never been off pavement its entire life. The CA sun was brutal in the cowl gasket. With wet Oregon winters, this was a must do and your video made this job much simpler. Thank you for all your very informative how to videos

@TheOtherSideRacing 3 года назад

I bought a 92 yj a couple months ago, and I was literally able to do all fluid changes possible because of your videos! I also replaced the tie rod thermostat, radiator , and bunch of other small things and I can truly say that I wouldn't have been able to do so with out your videos. so THANK YOU! MUCH APPRECIATED! please do a meet up or something after all this covid bs is over!!

@Mck499 Год назад

Yj's are awesome, currently looking for one myself. Haven't found any good ones unfortunately

@bekind4642 Год назад

Helpful. Just got a 91 and that's the first thing I needed to change. Thanks.

@kenthedenstrom4099 3 года назад

I was just going to do this on my cj. Perfect timing. Thanks

@davidshettlesworth1442 2 года назад

Thank you for this very informative video. It helped me a great deal in the performance of the task on my jeep rebuild project. Carry On Sir!

@HWoodCreations 2 года назад

We are planning to do this on my dads YJ soon. Thanks for the great video!!

@tdck6186 3 года назад

👍👍 I did mine when I replaced the windshield

@JeepSolid 3 года назад

Yeah! good time to do that

@therooster1845 3 года назад

Been needing to replace my tj wind sheild frame this makes it look easy

@_JEBUS 2 года назад

Do yourself a favor and replace the torx bolts that mount to the roll bar with grade 8 hex for future projects. If the torx ones are already rusted out they are a pita to get off without stripping.

@dougharlow6037 Год назад

1st definitely lube your windshield hinges. I shoot mine with WD a couple times a year. I replaced my seal in my 1991 YJ, hard top. I marked everything so I new how and where everything goes back. I had a huge problem getting the windshield back down to it’s original location. It seemed the new gasket was so fat the windshield wouldn’t go back to its original location. I couldn’t get the 3-hole brackets to line up and the windshield was about an inch from the rollbar no mater how hard I pulled on it. I eventually hooked up a ratchet strap to the windshield top center loop and attached the other end to the rollbar and still I thought I was going to brake the windshield. I also had to get longer bolts to pull the rollbar close enough to install 1 OEM bolt to hold the rollbar to the windshield frame so I could install the other 2 OEM bolts. Great video. Thanks

@starrvalley12 3 года назад

I replaced my windshield frame with fiberglass, they are notorious for rusting.

@mascatrails661 3 года назад

Thanks for sharing. Looks like the previous owner of my yj just said screw the gasket and just went to town with silicone.

@vrsoft Год назад

I just I stalled my new seal on my ‘93. Discovered that one of the seal screws has been missing for more than 25 years since I’ve opened my YJ! I would occasionally get some water in the cabin. That explains it :) I didn’t use any sealant on the front outer lip where it rests against the window frame. Have you any leaks, or rust formation under the seal, without any sealant on that outer exposed lip?

@dkhallal 5 месяцев назад

So my windshield seems like I have to force it quite a bit to get it to meet back up with the role cage bars I was hoping to see if there was some kind of trick but I guess it’s just a matter of squeezing it back down?

@aaronkeiser6349 2 года назад

Good video and to the point. Would have liked to see more of how the wiring was tucked for the wipers though.

@strongsads1 3 месяца назад

Thanks for this video! I have at ‘92 YJ and I’m going to replace the gasket this weekend. What was the cleaner you used before placing the gasket on?

@stevenb320 2 года назад

Do you link's for the weather seals used. I am replacing the same seal plus around windshield and top of frame

@gloglo1275 3 года назад

My 95 wrangler cowl gasket does not seem to be flushed resting against the top of the windshield frame. Not sure what I did wrong. I tripled checked, and everything was installed properly. Any advice?

@moabwheeling 3 года назад

Although a little different than yours I plan on replacing mine on my TJ too . I don't have any leaks but I'm sure mine is the original one from the factory . Good video again Dale ,looking forward to next weeks live stream . I wont be able to watch it live due to me having yet another procedure on my back , but as soon as I can I will watch it. Take care and be safe my friend.

@JeepSolid 3 года назад

Thank you, and good luck with your procedure. We'll be here when you're done 👍🏽

@moabwheeling 3 года назад

@@JeepSolid Thank you sir .

@davideldridge3686 3 года назад

looks like your vent intake cover is backwards. Until you are trying to remove air from the cabin to the hood. The air hits the windshield and goes down and forward on a jeep, you can verify this by watching ice and water move forward on the hood while driving at speed.

@wyattrobertson17 Год назад

Would you be able to show the link for that gasket I can’t find one?

@richardlynch329 3 года назад

I wish I had thought of doing this, I replaced my front speakers about 2 months ago and had to put down the windshield. I don't feel like doing it again

@maetb 3 года назад

Awesome! Are you going to do a video on replacing the glass? I think I heard you mentioned that you were going to paint the body - I am curious what you have to take off in that case. Thanks!

@JeepSolid 3 года назад

Yep. I plan on replacing windshield and paint. Lots of projects going on

@DerekGH 3 года назад

The torx bolts on my windshield are stuck tight. Any tips please to get them loose? Thnx

@mbflyin 10 месяцев назад

Pb blaster over night, then impact wrench.

@kathrynmull4259 Год назад

Do you have a link for the gasket?

@handle2935 3 года назад

Nice Video as always. Do you have any plans on changing the windshield seal? ( I dont know if that's the name of it.) I was doing bondo work and prepping for paint and I'm worried about how to replace that piece.

@justinshivers261 3 года назад

Would this be the same procedure for a tj?

@Fossildobber 3 года назад

Isn’t your cowl scoop on backwards?

@tdck6186 3 года назад

That's how mine is. It forces more air though the vent. When using heat, the air comes from the inside vent not the cowl.

@JeepSolid 3 года назад

There's debate about that. I prefer it facing toward the windshield. This is how the PO installed it. Haven't changed it. I did a wind flow test on the hood and found that at the base of the windshield, air is actually blowing forward.

@Zoofactory 3 года назад

Behold the sane man. When the world is ready to burst into flames he stays stoically focused on his Jeep, which he’ll need if and when the world bursts in flames. It feels great to put down RU-vid..🧐 Wait. I’m on RU-vid 😆

@JeepSolid 3 года назад

Haha! Yeah. It's a nice escape.