Learn raise text 

Thank you!

Thank you

Thank you very much for the kind words. Thank you for watching and showing my mistakes is what I called the golden rule of the hinkleshop lol. Hopefully I don’t have to use that rule too many times. 😆😆

You’re welcome thanks for watching

Thank you! Glad you enjoyed it and hope it helps you

Thanks for watching A little hard to explain here but basically create a border around the relief (chicken) so no material is removed beyond the border Enter the text outside the relief border enter a boundary around the text highlighting both boundaries and the text create a v bit tool path limiting depth to the same z as the chicken and that should work Simulate the carve and check to be sure I’m right Hope this helps

@@Hinkleshop I will try that. Would that v bit too path create carved out text or text that looks more embossed or like I bought letters and glued them to the board. Thanks for the videos and response 🙂

@@Hangs4Fun the letters should look like they are glued on

@@HinkleshopI get the concept of creating the boundary around the rooster. Problem is, it won't be a nice square box or something easy because of the way the text I'm putting there is laid out. So I'm having issues creating a boundary around the rooster (I'm using polyline) for an area above and an area below. I can create the odd shape (boundary) around the rooster ok, but then I can't match up a boundary for the text area that perfectly matches up to the hand drawn polygon shape, such that a tool path would remove all (other than rooster and text above and below). I really appreciate the help, once I get this, I can pretty much do any combination of relief and text.

@@Hangs4Fun highlight the poly line boarder and do an offset outward you will get a larger duplicate of that boarder then put your text between them

Thank you for watching Mark and thank you for the kind words. I’m glad I could help.

Thank You you are very welcome!

Thank you I save tool paths after all designs are complete and I’m happy with it

To round the top you would have to do a relief carving which is much more complicated

Thanks for watching I’m not quite sure what your asking but, if you want to create an oval click and hold the circle tool and a fly out menu will appear with an oval selection I believe

😅 No,no. I have been trying to do an address sign with the numbers raised and with about an 3/8 or so boundary around it. It actually comes from another site. He uses aspire and or vertical. I was trying to do the same thing with carveco maker. Pretty new at this so just trying to put things together. However I did just find one that you have. And I will have to say I like your videos a lot easier to watch for an old but goody. Thanks

@mauricepeters9588 Ok I think I understand now So. Create an oval vector place the text inside the oval Activate the oval and the text limit the depth of cut to whatever the height you want the letters Then deactivate the vectors and create a boundary vector on your stock Activate the boundary And your oval and do an area clearance slightly deeper than the text depth You will then have an oval with letters on top of it Also I may do a tutorial on this stay tuned I’ll try to get it done as quickly as I can Hope that makes sense

Thanks for watching That’s another video for sure I don’t have one at this time I will add it to the list in the meantime Leighton @carveco can assist