Learn to make an easy no-sew outdoor cushion by Lavender Buttons Design 

I love that idea. I'm glad you found the video helpful and I'm sure in a van it'll hold up well for a long time!

I’m so glad you found it helpful 😊

Hi Debra, thank you! Some extra tips after having this on my porch for a while... some of the sticky on the Velcro became less sticky so I brought out the glue gun and reinforced all the seams and now it’s as good as new!

Same here!!

This us doable, I'm just gonna use a hot glue gun

Thank you! 😊

I’m so happy to hear that! I’m glad you found use from my video

These are great tips! Thank you for sharing

I’m so happy to hear this, Elizabeth! Thank you for sharing.

Thank you!

You’re welcome!

I hope these hold up well for you!

Thanks!

Thank you! I’m so glad you found it useful

Thank you Tricia! I’m so glad that you found it helpful!

Thanks Dianta!

thank you!

Thank you for your feedback.

I'm glad you found it useful!

You’re welcome! I’m so glad you found it helpful.

Thank you!

Glad you enjoyed it!

Molly, I’d love to see what you make! Maybe you can share it with me on Instagram or Facebook?

Great Idea Molly!

Thank you! Glad you found it helpful

It’s so crazy how expensive ready made cushions are. I hope your DIY ones turn out great. If you want to share a photo of your final product with me on Facebook or Instagram I’d love to see what you make!

Great idea!

Thanks!

Hi Veronica, thank you. They are calphalon nonstick. I’m not sure if they’re hard anodized. I’ve had them about 4 years and most have held up pretty well but the pan I used most is no longer nonstick. Calphalon is supposed to have a great warranty system but I haven’t had any luck contacting them. We always wash them by hand and followed the instructions they came with. They’re decent pans but in the future when more wear out, I will mostly likely choose a different brand due to the lack of customer support I’ve experienced.

Here’s a link to the foam: www.homedepot.com/p/FUTURE-FOAM-3-in-Thick-Multi-Purpose-Foam-10030BULK3/203837114 The table cloth I bought off Amazon. There are so many great patterns and colors on there

Thank you! I wouldn’t say they’re crunchy, but they do have a little vinyl squeak noise. Once I’m settled they don’t have any noise

Hi Delma, I’m not sure. Mine is always in the shade. I imagine the vinyl table cloth might get pretty warm

I’m glad you found it helpful! I got the foam at Home Depot, it’s 3” multi purpose foam and it was about $20 for a 2x6 ft piece

Great & explained so well. I want to make a fabric cushion for my indoor storage bench cushion. Can you tell me if this would transfer over? Thanks!

@@Kim-ld9kb Hi, my apologies for the delay in responding. I believe this would work well for an indoor storage bench too!

Hi Terry, it's not 100% perfect but the trick is to do shallow slices (maybe 1/2" or so) with the knife over and over until the foam is cut all the way through. Try not to squish the foam down while you're cutting and this should make a pretty even edge. Then the thickness of the table cloth helps hide any other imperfections.

Absolutely!

I believe I used 3” foam, something similar to this: www.homedepot.com/p/FUTURE-FOAM-3-in-Thick-Multi-Purpose-Foam-10030BULK3/203837114

@@LavenderButtonsDesign Thank you!

If you plan to use it a lot, I would be very generous with the amount of Velcro you use. I ended up having to go back and reinforce mine with more Velcro and a little hot glue. I only use mine occasionally though. The great news is that it’s easy and inexpensive to fix if it gets worn out

I have mine on a covered porch and it’s held up really well. I did end up mending it with a hot glue gun on the seams to reinforce it and it’s pretty sturdy.

Hi Richa, I don’t remember what size the full piece of foam I bought was. I checked the Home Depot website and they have a few depths that are 2ftx6ft. My bench measure 49.5”x19” so that’s what size I cut the foam down to.

Hi, I bought this one off of Amazon, here's the link to the one I got: www.amazon.com/Home-Fashions-Waterproof-Geometric-Tablecloth/dp/B01ELOW7EM/ref=sr_1_7?dchild=1&keywords=table+cloth+felt+back&qid=1595992763&sr=8-7

Thanks a bunch!

Could you glue it instead of velcrow?

@@crazey4utube yes absolutely, I ended up reinforcing mine after a while with some hot glue and it held up really well.

Hi! Here’s the link for the table cloth: www.amazon.com/Home-Fashions-Waterproof-Geometric-Tablecloth/dp/B01ELOW7EM/ref=sr_1_7?dchild=1&keywords=table+cloth+felt+back&qid=1595992763&sr=8-7 Here’s the link for the foam: Your friend has shared a link to a Home Depot product they think you would be interested in seeing. www.homedepot.com/p/FUTURE-FOAM-3-in-Thick-Multi-Purpose-Foam-10030BULK3/203837114

Great idea!

mantel de vinilo

Thank you for the feedback!