LED headlight upgrade on a 150cc GY6 Chinese scooter 

Offroad lights typically dazzle oncoming traffic. Consider a driving light with the proper beam pattern and cutoff.

for future readers and viewers, those white/yellow wires coming from the gy6 139/152/157 stator are unregulated AC and require bulbs to dampen voltage and current. without bulbs AC voltage will go out of control and everything will burn out, so you need a resistor and choke to clamp that down. don't ask me how i know.

“Past tense…probably too late at this point.” “You have to spread it apart, to get it on.”

Beautiful video as always! That's actually pretty wicked I like the look

You can use steel wool to remove that surface rust from chrome surfaces, it works really well.

great job on the light upgrade , i needed that

Your highbeam light I use on my scooter same way. OEM bulb on replaceable in fixture only high beam worked, so I pointed it down and added the little light works well, love when cars flash their brights at me and I switch to the LED then they didn't mind the fluorescent too much . What you use as the low beam I use on my truck for work, works well to see more than 180° on each side or to blind other drivers who can't seem to turn off their brights I see you did not use a resistor on the scooter nor did I 👍🏽. Good video bro I'm gonna have to go back and watch some of that in detail to understand the wiring to help me set up my Yamaha Zuma bugeye turn signal LEDs

The scooter is back!!!🎉🎉🎉

I just been wondering what would be a good replacement for a headlight

This channel is golden lmao

About this time last year, I bought a new LED headlight bulb from Amazon, it's much brighter than my original headlight , I paid more and got only one bulb, it is wired correctly, I think you could have gotten a better lamp if you wanted too , you deliverably picked the cheapest selection , I suspect you did this as a "lesson by example" so viewers would not make this mistake

Paul, what’s next for the rav 4? Once again great video 👍

functional, but I would probably keep the original lamp housing and modify it to accept an LED-panel or something...

Best idea for you is just to ride during daylight

You could put that unused 12 volts ac into a voltage regulator and power a usb charging outlet for charging phones and other accessories without and extra drain on the battery, WOW 😳

Looks good enough to me Its dark innit

If the brown wire is ac current, can you just eliminate it all together to just run off the switched DC power from the black wire? Or why did you connect it with the black and white wires?

Iamm glad if my headlight become better than the original candle light, it's no halogen on my scooter

Re: broken plastic screw receiving holes. I wonder if bondo would stick and could be appropriately drilled to receive screws ?

Hi Paul, love your videos, however I think that your videos arent being promoted as much anymore, as I never see them in my recommended when you upload. Anyway, would you consider putting a nudge,bullbar on your rav4? Thanks.

I know you saw my video review on the Nilight Nixmen for the Ba20d style bulb. I wonder if it helped you choose the Nilight brand for this project. I agree, the model you used is horrible for brightness and the difference between the high and low beams. As you see from my video I had a much different experience where my Nilight Nixmen worked awesome for both brightness and difference between high/low. My one LED cost 25 dollars. Your 2 for 16 seems really cheap. I'm sorry you had a bad experience with the brand.. perhaps you got a knock off? It seems strange you and I had such different experiences. I see your individual High and Low LED's are still Nilight brand and work well. Perhaps it's just that that particular model was off, not designed correctly?

I want to add an ac to dc converter at the light switch so all my lights can be dc .so if i hooked acdc converter to the brown wire on the light control that should put evrything to dc from control right?

Won’t the led have a low lifespan without a regulated power supply?

I can say 100% that the low beams on the 2013 Kymco Super 8 are total crap.

Those Chinese LED bulbs. Are not the high intensity ones. You probably spent $10 on . Buy one for $30 and then show how bright it looks

You should upgrade to hid. They make 35watt. Superior compared to led. Led SUCK.. all china companies lie about watts and lumens and probably other stuff as well.

Скутер потерял ретро стиль

feed them to african children ... 😳did u just said this like it was normal?

Why don't buy a quality Honda scooter instead of this crap before spending time and money?