LED Trailer Lights with non standard wiring ? 

Glad it helped :)

Which one is ground?

@@petronkosi7422probably black

Good luck

@@davidyummus6259 I think I have to ground the white wire to the back of the light.

Not on the lights I bought.

I have to agree with James Tabisz. I bought some LED's and the set up is the same as what James stated.

However your video did help me problem solve what I had. Thank you.

Did it help ?

The lights have just 2 functions,... A moderate or low light for running lights then a brighter light fir brakes & that brighter brake light gets a broken signal from the car to flash for turn signals. Low light for running, bright light for brakes & turns

Yeah, nice & bright. They are water tight so I think they will be more reliable too :)

Never trust a RU-vid video ;) I tested the lights before installing, I wired them the way I said & they still work correctly, thats all I can say.

Red to green black to Brown white wire is your ground from the lights nothing else

I can't because Wires vary with different Lights & Trailers,... That's why I mentioned which wires on my lights did which function.

@davidyummus6259 but most common trailer wires has green/brown on the starboard side and yellow/brown on the port with the white wire on the light as it's ground

@@chadjohnson5917 Well, if Brown runs down both sides of the Trailer then the Brown Wire would be for Running Lights & the Green & Yellow would be for Brake/Turn Signals being the brighter light :) You now have your answer ;)

@@chadjohnson5917 I still have the trailer with same Lights but the wiring is taped up so I can't see the wires but,... If you have Brown wire running down both sides of the Trailer then they "should" be for Running Lights which is the softer or lower light which means the White wire on the Lights "should" go to the Brown on either side, the Red wire on the Lights "should" go to the Green on passenger side of Trailer or Red to Yellow on Driver side of Trailer. Black on Lights to Ground. Test the wires on your lights with a battery to know exactly which wire does what function,... Mine in the video was: Black to Negative battery then one at a time, touch Red wire to Positive terminal, then White to Positive terminal,... The low light is Running Lights & Turns, the Bright Light is Brakes.

And thats why I did the video lol

NO ! Why the f*** do u think I made the video ? As I said, these were cheap lights made in China & they dont give a crap about what we do or need in America ! I just rewired the trailer, kept the same lights & reviewed this video to check & it stands correct for MY lights !

There is NO wiring diagram on the light & NO papers came with them !

Thanks for all your help

Just dickheads