Legendary Engines #1: The "Mezger" Porsche Flat Six - What Actually Does That Mean?

Подписаться 369 тыс.

Просмотров 37 тыс.

50% 1

Reuploaded due to my silly lockdown brain making a mistake, then my lazy lockdown ears not hearing it....
Ever heard someone tell you their engine has a "Mezger" in it? I'm sure you have if you've been around 911 circles - but what does it actually mean? Let's have a look.
#Porsche #FlatSix #Mezger
Want to see your car on the channel? Email me on talk@jayemm.com
************************************************************************
Looking to buy a new or used car? HOLMESDALE FINANCE can help!
My channel partner Holmesdale Finance specialises in finance solution for new and used prestige, sports and performance cars - including MODERN CLASSIC policies and many more. You might be surprised at what they can do, so speak to them to find out more. Their website is www.holmesdalefinance.co.uk/
***********************************************************************
If you love our content, please check out our Patreon page for even more:
/ jayemmoncars

Авто/Мото

Опубликовано:

22 апр 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 100

@2002honda954 4 года назад

R.I.P. Mr Mezger. Thanks for all the wonderful sounding six's we hear today

@3.2Carrera 2 года назад

I'm rebuilding one now. Amazing design. Strong as hell with 8 bearings for only 6 cylinders with precision dry sump oiling. Love working with it.

@geoffclarke8934 4 года назад

One of the all time great engines. Really miss my 996GT3 I had for 12 years.

@danrook5757 Год назад

What about your ex wife

@trance9158 2 года назад

917s....the holy grail of race cars. Love the exhaust notes at the start of the video. Nothing sounds like a Porsche.

@LC4Driver 4 года назад

Ride in Paradise, Hans...

@pavelprunner8855 4 года назад

Jay, this shows a lot of research put into a couple minutes video. Good job man, and thanks. Keep doing a good job. :)

@Rynardts 4 года назад

Very timely video. Hans passed away on 10 June 2020. RIP Hans!

@RogerBaileyOnCars 4 года назад

I watched this again - well worth it.

@kkt391 4 года назад

This video's quality is excellent exceptional! Been following side the McLaren controversy. Keep it up!

@rogermo5122 4 года назад

Thanks for the videos, they are really appreciated! :)

@peppyvw 4 года назад

Aaah , you fixed it! #Boxer ↔️😉 Great stuff, keep it up. Regards from The Netherlands!

@n.a1827 4 года назад

Let's not forget the last version of the gen 1 turbo 997 mezger derived engine was actually also used in the 997.2 3.6 GT2 RS with 620 Bhp and the most power full road going Porsche at the time.

@mntbighker 4 года назад

Love to have heard your thoughts on the differences between a Mezger and current power plants.

@smpro_ 4 года назад

Love your content Jay, you inspired me to start my own youtube channel. Thank you for motivation.

@JayEmmOnCars 4 года назад

That's great to hear. Good luck!

@modernworldiscrap 4 года назад

RIP MISTER MEZGER

@MrRMC-gj4ip 2 года назад

This was an awesome video!

@gregcym 4 года назад

Really enjoyed this video. Could be a very interesting series. 👍

@e36328isport 4 года назад

gregcym I agree completely👍

@aboyandhisdog 3 года назад

So I'm a tad confused...is the 3.6L in the early 997 a Metzger or is it different in some way? What about the 3.8? Thanks, James, great channel!!!

@geoffwatches Год назад

Good video, thank you

@Frapzoid 2 года назад

Ich danke ihnen, Hans.

@pye007 4 года назад

Its that Mezger sound!!

@BibTheBoulderTheOriginalOne 4 года назад

My favourite exhaust sound was my old Kawasaki Z1300. Silky smooth with a nasal drone....music to the ears...

@automotivetvchannel 4 года назад

nice video

@mcspikesky 4 года назад

During the 1970 LeMans cheese shortage the Porsche team, even the tea ladies, were involved in hand producing Mezger cheese. This herculean effort propelled Mezger cheese into the hearts of the French earning them valuable contracts once French cheese production restarted following the shortage.

@marcducati 2 года назад

The metzger also has the robust Nikasil treatment of the cyldinders that all 911's had up to the 993 but not the 996 M96 and M97 engine. Those have the Alusil treatment that has the resistance of butter, hence the infamous bore scoring and all the engine failures.

@animalcol1 4 года назад

A whole lot of smart arses here. Have a gold star, for pendantry. A great video made by someone who does being criticised by those who dont.

@mjohannssen 4 года назад

Really great video. 👍👍👍

@Surreyhillsgravel 4 года назад

What a life he must have enjoyed. RIP.

@flyingby3703 4 года назад

An engine that I would love to see in this series is the BMW S54!

@lunakai_360 3 года назад

That's a sweet engine😌

@flyingby3703 3 года назад

Lunakai_ I test drove it in a Wiesmann MF3 once, was amazing, a lot of fun and great sound.

@mcspikesky 4 года назад

In order to facilitate the delicate production of Mezger cheese a sophisticated 'dry pump' system is used to distribute the raw cheese throughout the production vessel allowing for superior texture,, cheese life and cheese cooling. This makes for the smoothest, sleekest and driest cheese in the Northern Hemisphere

@rickc2102 4 года назад

I'm now officially smarter today than I was yesterday. Cheers!

@pervertt 4 года назад

Well, I learnt something new today - not every flat engine is a boxer engine. Good job!

@paulomagalhaes9405 4 года назад

Yes it is ... but not every flat/boxer are " Mezger " engines ...

@ordersforsplitdogs4315 4 года назад

RIP Mr. Mezger. You will be missed

@user-el5mg4it9t 4 года назад

R.i.p. Mr Mezger.

@HipsterNgariman 4 года назад

Wasn't the 993 GT1 already just the rear of a 962 ?

@rumrnr78 Год назад

I would love to put a Metzger engine in my 996 and make it a "sleeper" Porsche. Would this be possible? What would it cost?

@pye007 4 года назад

Do you have a photo of the tea lady?

@planes121 3 года назад

Mines got a metzger in it!

@danrook5757 Год назад

Watt u got

@raymondlim1485 3 года назад

Legend. RIP

@jayjackson1272 4 года назад

Was this taken down and reuploaded? What happened

@JayEmmOnCars 4 года назад

Yes, I corrected a mistake in the video

@iancharlton678 11 месяцев назад

………. why I done gone bought one 🎉 Overjoyed ⭐️⭐️⭐️⭐️⭐️

@kyleabrahams2696 4 года назад

Wasn’t this uploaded yesterday???

@JayEmmOnCars 4 года назад

Yes, had to make an edit for a stupid mistake I didn't notice

@HORUS9 8 месяцев назад

So does this mean my 987 boxster s has dry sump? So cool!

@SB-vb8ch 4 года назад

Can you clarify the "180 deg V12" rather than "boxer" comment?

@julianb1474 4 года назад

I got schooled in this after the previous upload of this video. The comment that the V12 was chosen for "packaging reasons" with no explanation as to what that meant was what caused some head scratching. For the difference in design, see wiki.en.wikipedia.org/wiki/Flat_engine It would seem that a V12 could be a little shorter. Because of shared journals the crank can be shorter and the cylinder offset reduced over a boxer design. I'd have thought the differences pretty small, but there you have it.

@andik.4235 4 года назад

@@julianb1474 And a shorter crankshaft is simpler to handle regarding bending, because it is stiffer because of the shorter length. So it can be build lighter and the engine is faster picking up revs. Ferrari Testarossa engines were also 180 ° V 12 engines.

@mntbighker 4 года назад

Singer Williams 911 sound...

@jehl1963 4 года назад

A couple of additional points -- 1) Dry sump engines usually make more hp than an equivalent wet-sump engine because they reduce the oil spray (mist?) In the case that causes drag on the crank like how riding a bicycle in the rain takes more work than riding in the rain. 2) As a derivative of the 962 engine via GT1 race car, the GT3 engine was still of the technical lineage of the Air-cooled 911 engine, just one where pretty much every part and assembly was incrementally changed over the decades from the original 2.0 liter air cooled 6. This is why you can still retrofit some of the GT3 engine parts onto an air-cooled 911 engine. The oil pump is one thing that comes to mind if my memory is correct. The 996 Carrera engine on the other hand is a completely new design that shares nothing with the air-cooled motor aside from the words "flat-six".

@rocketn8 4 года назад

RIP

@mcspikesky 4 года назад

Mezger cheese is renowned for its sleek looks and excellent protein levels compared to other non water based cheeses.

@120M 3 года назад

997 CARRERA S has also this engine?

@danrook5757 Год назад

What year

@hmk911 Год назад

None.

@ahrred3127 4 года назад

Deja Vu

@barrybritcher 4 года назад

What was the mistake

@JayEmmOnCars 4 года назад

I called the flat six a straight six

@matteightytwo 4 года назад

A boxer IS a 180* Vee, isnt it?

@JayEmmOnCars 4 года назад

No, there is a difference

@matteightytwo 4 года назад

@@JayEmmOnCars firing order difference?

@andik.4235 4 года назад

@@matteightytwo In firing order and with a Boxer configuration both opposite mounted pistons move outwards at the same time and move inwards at the same time. They have not a shared joint at the crankshaft like an 180 ° V engine. There one piston is moving out and the other one is moving in. And the vibration harmonics are quite different. A boxer for example has no first order oscillations.

@matteightytwo 4 года назад

Nice, everyday is a school day!

@thefrenchruraldream8069 4 года назад

Didn’t this come out the other day? 🤔

@JayEmmOnCars 4 года назад

Yes, had a mistake in it so re-edited

@thefrenchruraldream8069 4 года назад

JayEmm on Cars ah ok love the channel and thanks for keeping your subscribers sane 👍🏻

@fg87fgd 7 месяцев назад

Unfortunately this is in German, but 9FF does an incredibly good job in getting the weaknesses of 996 & 997 engines and strength of Mezger engines across. Here is how they'll switch a simple 997 Carrera into something quite different: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jAxTUFCEY_w.htmlsi=7oRqWxI-mDd983NE

@990v6 13 дней назад

These guys seem to be frauds just check the detailed reviews. It’s shocking

@mcspikesky 4 года назад

MEzger is a type of cheese which does not use water in its production. Video over.

@pokiou 4 года назад

so Hans contributed to the 996... who came up with the stupid IMS roller bearing then ?

@haydentakara4369 3 года назад

I’m pretty sure the 996 turbo didn’t have the issue and had the mezger engine, while the regular carrera had the issue but no mezger

@pokiou 3 года назад

@@haydentakara4369 yup that's right only the c2 c4 mk1 and mk2 and also the 997's had IMS issues. But still i wonder who sat in the meeting and thought that this was a good idea. Even though i've done 194,000 km on my 996 with original engine and im truely not worried i just feel its the 1 thing that deters the purchase of what is actually one of the best drivers cars.

@sklyrovka 3 года назад

This video has too few views.

@beardmechanix1642 3 года назад

Also worth mentioning how the Mezger needed to be routinely rebuilt after hard driving of up to 40k miles. The Mezger engines also suffered cooling issues as well as bore scoring! My only hate when it comes to Porsche Fan Boys is the whole “Mezger” name dropping. However, the engines were far from perfect. In the 997, they show their age. It’s not a great match for such a great chassis. 997.2 were better all round road cars when the DFI engines were introduced.

@jeanpaulceulemans9973 3 года назад

total nonsense, the only thing better with the 997.2 DFI is the longer rod/stroke ratio, all the rest of the engine is less durable and less tunable, including the rods which were strengthened again in the 991 turbo. Some early 997.2 turbo engines even got stuck pistons due to the cylinders shrinking from residual tensions in the block. Porsche also recently dropped the Alusil for iron plasma spray coating but most engine builders still agree that the Nikasil of the GT1 derived engines is still the best in the business for wear resistance and temperature cycling. But even in the exceptional case of bore scoring, the wet liner can be replaced without any machining on the block When the cooling pipes are fixed, the 996/7 TT engines are almost indestructible

@beardmechanix1642 3 года назад

@@jeanpaulceulemans9973 nonsense? And what were the massive issues that problematic on the gen1 997 Mezger? Bore scoring and IMS Bearing failure! Sorry, defend the Mezger all you like, the DFI was a better engine for the 997!

@jeanpaulceulemans9973 3 года назад

@@beardmechanix1642 You have no clue about porsche engines whatsoever now do you? The problems you're talking about were with the open deck locasil engines in the Carreras/Boxters and these are totally unrelated to the TT/GT closed deck wet liner Mezgers which have no ball bearing on the IMS and nearly indestructible Nickel Silicon Carbide cylinder coating

@jeanpaulceulemans9973 3 года назад

@@beardmechanix1642 The first gen DFI 9A1 Alusils had casting stress that could lead to oval cylinders and catastrophic piston lockup Although much better than the M96 junk used in the Carreras they're not even close to the mezger in durability The second gen DFI 9A2 dropped the Alusil alloy and switched to a tougher alloy with iron plasma tranfer cylinder coating which is still inferior to the Mezger cylinders All serious engine rebuilders prefer the wet liner nikasil cylinders solution of the original Mezger engine

@beardmechanix1642 3 года назад

@@jeanpaulceulemans9973 this is the problem with Porsche fans! Slate a Mezger engine and be doomed for the rest of your life. Doesn’t matter what version of the engines were problematic! The more they evolved, the more issues came along. The engine was dated for the 997! The chassis’ were superb! DFI was better suited to the 997 chassis.