Thanks for the info as usual John! I have an old FID 2 speed and I needed the ball and spring. Gonna give the fg spring a try now. And I'm about to put a blackbone 2 speed in my baja.and the more info I have the better!! 👍👍💯💥💥
Hey John just checking in hope everything is good on the east coast with you and your family. Again, good video and thanks for the info. If i ever run a 2 speed transmission I’ll definitely refer back to this video. Cheers
Everything is as good as it can get so I’m not complaining but I do wish I had more time to do the things I want to do! My family is well just worried about all the Coronavirus🦠 going on. Last week there was 3 people infected nearby and now there may be 15. Shits getting crazy with lots of places closing up even schools . Once in awhile I love to get a full body massage 💆♂️and a 👋🏼🍆💦know what’s I mean? and now I can’t wtf? Bro I hope all is well by you and that you and your family stay healthy. There’s probably more cases out by you since more people and shipments from China 🇨🇳 usually goes to California first before to the rest of the country. I’m glad you liked this video thanks and I hope it helps you out if needed .
BOTAJELL they shut down the port in Long Beach. I work in Logistics and shipping bro. My industry has been hit hard. So a lot of people got laid off. There are no shipments 📦 🌊 🚢 going in or out.
I have been working on my max t all day sure am glad I pulled the transmission it was bone dry and sealed with silicone so it's done right now also done shocks they were half full got the battery change out all the wires sorted out kill switch installed just about done and the coil was serious loose
Awesome bro good stuff ! Wish more of the new younger generation would wrench 🔧 more like us and go over there things . Not many people nowadays want to work for things and I think it’s because there just so used to having everything handed to them when they were younger .
I have a problem I hope you have a fix for. I installed the GTB 3 speed gear set in my Baja 5b it goes until the first shift then it free wheels until the rpm's drop then it clicks into first. Everything is installed according to the directions and one way bearing is good. Please help it's driving me up the wall. Thank you.
You got to get rid of that 3 speed and get yourself a King Motor 2 speed if you want less problems trust me !! With the king motor 2 speed you will be able to get and use the Primal RC gears ⚙️. Many of us use that set up on our Drag Race BAJAS and PRIMAL Dragsters from small blocks to big blocks . I will be able to help you with that setup and even tell you some tricks and tips to make that 2 speed even better! Get me on Instagram to talk better
Thanks for the vid !!! all due respect If you heat them up they practically fall out and don't remove material from the force when still hot install the new ones
Yes they do and there great 👍! I use them on my drag Baja with Bartolone 34 ReedCase drag mod engine. There actually Primal gears ⚙️ and there hardened. These primal gears will fit and work on your KM 2 speed just pick the sizes you want there are many sizes primalrc-com.3dcartstores.com/dragster-transmission Tell Them I said hello 👋🏼
Best to use for drag racing especially now since PrimalRC Now carries many gear ⚙️ ratios for different engine and race track applications! But you can bash with them if you want ? But just be ready for lots of maintenance on them because it will be exposed to dirt more and bumps and crashes .
Heat the gear with a heat gun, and the bearings push out by hand. and when you assemble, put your new bearings in the freezer for a couple of hours, and heat gun the gear, and they nearly fall in ... i just push it in with my thumb ;)
Awesome video mr.botajell, always learn from your videos,, my rovan Baja will finally be here in Florida tomorrow, wish I had the tools 🧰 🛠 you have, one day I will💯keep that content coming
Congratulations 🍾🎊🎉 to you on your new RC that’s awesome 👏 brotha!! Tools 🛠 🧰 will come in time . It took me years to collect all the tools I got. I got tools from the 80’s and 90’s still plus lots of new stuff aswell! Tools are a must for us Brappp heads !
BOTAJELL it’s a good feeling to be in the nitro gang and now the gas gang, still ain’t shown up yep, going by tracking number it says it should be here by 8pm tonight
BOTAJELL just got my rovan Baja, came a day late but who cares I got it, this thing is massive!! Pictures and video on the internet just don’t do it justice and it’s cause of yours and hybrids channels and content that helped get me back into the hobby, wish I could send you pictures and thanks 🙏🏻 to both you mr.botajell and thanks to hybrid for the content y’all put out and inspiring me to get back in the hobby and stepping my game up to join the 1/5 gas ⛽️ gang
hey whats most those guys time with small block 30.5 stock chassis km 2 speed bajas in 132ft I have a nasty 2mm stuffer full mod hand port 30.5 just wonder whats considered fast for a stock chassis small block on a hit. #QBR_quesenberry racing
Never use any oil on oneways except hudy one way oil ...i have had blackbone 2 speeds for about 7-8 years hudy is the only oil i use and have never had one fail.
In 3 years I’ve never had a fail with my one way bearings by using one drop of Lucas Oil Stabilizer on them . Also many people that drag race in Brooklyn used to go threw oneway bearings monthly and know there lasting them well over a year by using a drop of the Lucas stabilizer stuff. Try it on yours and see how it goes . I will definitely grab me some of that Huddy one way oil to try out and keep in my box 👊💥🤝💥🤜🤛thank you !
🤝💥👊💥I’ve been wrenching many late nights just No video! I’m getting sick of making videos. Even if I do one a week I still have so many comments to get back to especially on many past videos gas and lots of nitro stuff
@@BOTAJELL Hey bro, Had a small issue tonight. For some reason, and this is the 2nd time this happened. The stock coil spring came off my spark plug wire on my 30.5 cc CY Engine. So I removed the coil so I can order an MSD Wire for it today and not paying attention one of the dam coil spacers went behind the flywheel I think, and I cant find the dam thing. Now for some reason I cant find those spacers on Rovan or DDM's site. Do you know where I can get them? Im guessing I need to pull the flywheel as well just to ensure its not sticking somewhere behind it? I mean I looked for a good 20 minutes, shaking the car, turning it upside down, and the dam thing just never fell out. Any thoughts?
CBR Wix get rid of that coil and install a high voltage coil from Zenoah. You can even use the wire it comes with it but if you like the MSD wire ? Go for it no worries just install it correctly . If you need spacers ? Upgrade to the Bartolone custom coil spacers . I’ll try to send you the links here is the coil you want www.davesmotors.com/zenoah-zenoah-complete-rc-ignition-coil-with-cap.html you must get this tool also for proper installation! DO NOT USE Business card www.davesmotors.com/3330-97310-Zenoah-Flywheel-Air-Gap-Gauge-Tool.html this is the coil spacers you want to upgrade with www.davesmotors.com/Bartolone-Racing-RC-CY-Billet-Ignition-Coil-Spacer.html
@@BOTAJELL Ok thanks. I do already have the gap tool but yeah that spacer was my biggest concern. I still have no clue where that spacer went in my engine. Should i still pull the flywheel to see if its behind there? Thanks again.
CBR Wix it will most likely be plastic spacers so you should be ok not to worry! Got to be somewhere on your floor! Aluminum and plastic will not stick to your magnetic on your flywheel. Shake your engine anyways just to see if anything comes out before you reinstall everything
Why does this guy repeat himself so much....its 5 or 10 mins of repeating before you get any real info...I just skip to another video or skip to parts of the video I need.
