No video :(

Let's FIX my DW735 Planer Jam // WnW 235

Подписаться 46 тыс.

Просмотров 19 тыс.

50% 1

My planer was jamming with chips; let's figure it out!
👇👇 Click “Show More” for Stuff you probably want to know! 👇👇
The consensus after my last video was "more!". People were clearly dissatisfied with my acceptance of the spewing dust inside the case.
There were also a lot of good suggestions, so I pushed off my other project and decided to crack open the case again, point a camera at it, and defeat the safety-lock-out switch... all so that I could try and see what was going on in there!
Recommended DW735 video:
• Care and Feeding the D...
-- "Care and Feeding of the DW735 planer"
YOUR SUPPORT IS APPRECIATED:
☕ Buy Me A Coffee: www.buymeacoff...
💵 Become a Patron: / wordsnwood
🛒 Buy a Plan: wordsnwood.com...
👉 www.wordsnwood...
---------- ---------- ---------- ---------- ----------
🗜 LINKS TO SOME OF THE ITEMS USED:
(AND/OR other tools and jigs that I use and recommend.
Most of these are affiliate links. If you buy through these
links it helps support my channel. Thank-you so much!)
amzn.to/2bpMmkX - DeWalt DW735 Planer
amzn.to/2beSIY6 - 3rd party blades for DW735
📸 GEAR I USE TO MAKE VIDEO:
amzn.to/2OVusfx - Canon EOS m50 camera kit
amzn.to/2nI7w8Q - Shure VP83 LensHopper Microphone
amzn.to/3l7cSmi -- Rode Wireless Go microphone
amzn.to/3k9pFTR -- PoP voice lavalier lapel microphone
amzn.to/2aK7jZX - Inexpensive Quick Release tripod ball head (Very useful)
amzn.to/2NddVjk - I do also have a GoPro Hero 5 Black
amzn.to/1XC2D7l - Joby GorillaPod (Flexible small tripod)
As an Amazon Associate I earn from qualifying purchases you make using my affiliate links.
---------- ---------- ---------- ---------- ----------
MORE MORE MORE:
www.wordsnwood...
/ words.n.wood
/ wordsnwood
---------- ---------- ---------- ---------- ----------
🙏🙏Thank-you! 🙏🙏

Опубликовано:

29 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 55

@henrywitecki 7 месяцев назад

in my case the fan housing was actually broken. But this helped me find the issue. THanks!

@daleboe8912 Год назад

I’m glad I found this. I plugged mine up today and didn’t want to take it apart until I found a video to explain what I have wrong. Thank you. As Arnold would say “I’ll be back”

@alyssakeller7720 2 года назад

Holy cow! I have been racking my brain trying similar solutions you mentioned in the video.... if I go tighten those two screws and the problem stops.... well..... I’m not sure if I will be happy or irritated that the fix was right there and sooooo simple! It’s so frustrating to have to vacuum it out in between every run...Thanks for the video!

@Sebastopolmark 3 года назад

How many of the worldly problems could be solved if we only tighten up the "loose screws"! !! !!! Glad the problem was solved and I will have to keep this in mind - thanks Art

@Wordsnwood 3 года назад

No Comment. ;-)

@stevenlarson6125 2 года назад

Or vote them out next election

@oliverdunn1626 Год назад

I've been using the DW735 for about 20 years now, and one thing I've noticed is that the unit ejects chips faster than just about ANY vacuum I've hooked it to. That includes a 3 hp unit. I finally connected it to a trash can with a 4" hose and a fabric shroud (DeWalt sells the complete kit), and it works like a champ. I know that ANY restriction in outflow will cause sawdust leakage from the blower/shroud. Other than using silicon or taping the connection, there's not a whole lot you can do. I don't think that the bend you put in the hose really had an effect on the planer, since I've been using the same bend on my unit.

@Wordsnwood Год назад

Check out John Heisz's latest video as that is pretty much what he does (dedicated trash can). In my layout I don't think it would save me any floorspace so...

@jbb5470 3 года назад

Thank you for showing the rest of the repair. Good to know and be aware of!

@Wordsnwood 3 года назад

You bet

@neilf4128 3 года назад

I love that you called it a 🖨

@Wordsnwood 3 года назад

No teleprompter here, so who knows what goes through my brain...

@GilMartino 2 года назад

Thanks Art for doing this, I'll try my own.

@Mark_L Год назад

Just to add, my fan assembly was broken so no chips getting to my dust collector. I removed the broken fan, put it back together. Now I just have my dust collector connected and it works better than ever.

@jamesfrench8004 3 года назад

Art< I had the same problem, the fan shroud had a crack & hole where I couldn't see. Replaced the shroud and fan and solved 95% of the chip problems

@Wordsnwood 3 года назад

It was good to solve!

@FearsomeWarrior 3 года назад

Fun stuff. Diagnosing. Glad it wasn’t a crack and you ended up dealing with ordering a new part. The motor is spinning fast and vibrating the hell out of it. The fan blades on the back are for the motor itself. No doubt the blower side produces more than enough force to open that plastic a hair. Cheers

@Wordsnwood 3 года назад

A ten year old tool might need adjusting... go figure! 😁

@patrickkerr329 3 года назад

Love the song at the end. Sounds a lot like “plea from a cat named virtue” by the weakerthans! One of my favorite Canadian bands.

@Wordsnwood 3 года назад

"Upsetter" from the RU-vid Audio Library.

@MyGrowthRings 3 года назад

Good to know. Thanks for sharing, Art. Scott

@Wordsnwood 3 года назад

Thanks for watching!

@brentfowler2317 3 года назад

That's awesome man. I'm glad you figured it out. And that's crazy those two little screws where the problem. It was night and day difference between last time and this time.. well done friend. Keep up the awesome work.

@Wordsnwood 3 года назад

I was amazed.

@bobt2522 3 года назад

I'm glad it seems to have a simple solution. The leak is probably aggrevated by the bend in the hose increasing the pressure at the chip blower. I'll watch for that because I have two 90 degree elbows on the dust port on my planer and I don't plan to change that. The chips go straight down next to the outfeed table.

@KSFWG 3 года назад

You gotta love the easy fixes !! Glad it's working normally now ! Printer? Yup, you're an IT guy for sure !! LOL

@Wordsnwood 3 года назад

Sometimes when I review the footage later and I hear what comes out of my mouth.... 😁

@mariozornoza6912 29 дней назад

helped a lot, i had the same problem.

@hofnerbass 3 года назад

Excellent video and follow up.

@Wordsnwood 3 года назад

Glad you enjoyed it

@jamespolucha8790 Год назад

This is exactly what mine is doing, I didn’t jam my switch so couldn’t run it with the top off but I’ll try to clean it like you did, thanks for the video

@artdecco8617 2 года назад

Seems like this Planer needs RE Designed..........I keep reading about so many issues/ problems......Mine is brand new,,,,,and already will not crank up or down. I really can't afford ALL this down time..........Is there a better Planer built ???

@Kkuts37 3 года назад

Nice problem solving! This seems to be a common problem these days, a couple loose screws! :)

@Wordsnwood 3 года назад

Ouch, that hurts... 😁

@glenschumannGlensWorkshop 3 года назад

Thanks for revisiting this. Looks like you found the problem

@Wordsnwood 3 года назад

Glad I did it!

@andrewzanto8591 3 года назад

Thanks Art, suffered from the same thing. Hopefully it's the same easy fix on mine.

@Wordsnwood 3 года назад

Fingers crossed!

@bklynkrash 6 месяцев назад

Video was a Huge help! Thank you....

@job38four10 Год назад

You definitely have the wrong tidal on this video, should be called (....sawdust leak fix) I'm on my 3rd DW735 planer in 10 years. I'd buy a different brand but Dewalt is the only planer under $1000.00 that has it's own sawdust blower, I to have elbow right off my planer with flexible hose. Good video.

@Wordsnwood Год назад

Third!? wow, you're not having a long life out of them.

@dmayfam2 2 года назад

Have you ever gone to replace the brushes and they were stuck. My planer tripped the breaker and sparks were coming out of the brushes. Went to replace them and they were so stuck I had to break them to get them out.

@Wordsnwood 2 года назад

not yet...

@thedavelam 2 месяца назад

Thanks for this! Also not sure if this is a factor cause I’m a year late to this video - you’re not supposed to run a dust collector with the blower active as well.

@Wordsnwood 2 месяца назад

News to me... is that in the manual? There's no way to run this WITHOUT the blower active...

@thedavelam 2 месяца назад

@@Wordsnwood blower is alwasy active, just a separate dust collector cant handle the blower power.

@fernandog.aguirre2791 Год назад

I have mine for 10 years , two years without running and when I turned it on it last half hour and died on me.......

@cowboyssawmillandwoodlot6343 7 месяцев назад

Hi. I have the exact same issue. The blower screws I did tighten. Made no difference. Any ideas?

@Wordsnwood 7 месяцев назад

Sorry, I was just figuring things out as I went. I'd take it out and reseat things, and see if there is any other way to make sure it was sealed. ¯\_(ツ)_/¯

@paulrodriguez5830 2 года назад

I just got my planner and the rollers spun for one pass and stopped. They will not roll anymore. Any ideas?????

@Wordsnwood 2 года назад

take it back. could be a broken drive belt

@richbreed3462 2 года назад

How did you get those clips loose

@mikerichards6311 13 дней назад

😳🤔👍👏🏻

@lovelessk999 Год назад

Fox couldn’t compete with Disney afternoon. That’s why fox lost viewership on Goosebumps in the 90s. It was competing with better shows. You thinking people didn’t know what demographics were or what they were worth is just silly was based on your age. You missed the real 80s or you’d never make that statement without laughing at the myopic nature of it.

@Wordsnwood Год назад

I most definitely lived through the 80s, but I think you possibly dropped your comment on the wrong video... ¯\_(ツ)_/¯.