LG Plasma TV No Picture? How to Fix 60PZ550

Подписаться 9 тыс.

Просмотров 11 тыс.

50% 1

Send in your mainboard for repair
nickselectronics.com/products...
LG Plasma TV No Picture? How to Fix 60PZ550
In this video, we go over how to diagnose and fix a 60" LG plasma TV. The diagnostic pointed us to the mainboard being at fault and needing repair. This diagnostic also works with the 50" version of the Television 50PZ550 as well as the 60PZ750 and 50PZ750
If you do not have the tools to perform the repairs, we can fix it for you. For more details check out our website linked below:
If you are having a hard time with the diagnostic and would rather have us diagnose the boards for you, we have a full diagnostic service available as well linked below:
www.nickstvs.com/store/p2073/...
info@nickselectronicrepair.com
520-838-9359
Contact form on our website:
nickselectronics.com/pages/co...
For a list of our commonly used tools and accessories, please see the links below:
Soldering Iron
amzn.to/3FQfyhG
Solder
amzn.to/3qScy0d
Desolder wick
amzn.to/33DAjjy
Flux
amzn.to/3IoXL2X

Наука

Опубликовано:

11 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 45

@NicksTVRepair 10 месяцев назад

Send in your mainboard for repair nickselectronics.com/products/ebt61533403 info@nickselectronicrepair.com 520-838-9359 Contact form on our website: nickselectronics.com/pages/contact

@frustro4323 Год назад

Holy crap! The first few seconds had exactly what I thought it would be with no BS. You have my 👍 and subscription.

@NicksTVRepair Год назад

Haha I am glad you found the video to be Furstration free :)

@frustro4323 Год назад

@@NicksTVRepair Do you have an affiliate link for the pad? I can use that on a Samsung pdp60 plasma as well. I can only find it on ali

@anthonyb3109 Год назад

Nick, my man, incredible! I don't know how long it will last, but this worked 100%. The most trouble I had was removing the heat shield, everything else was easy and worked exactly how you showed. Thank you so much!

@NicksTVRepair Год назад

Hey Anthony, yeah that repair as long as you did it with a proper BGA rework machine then it should last. If all you did was the heating, then all that is used for is diagnostic purposes, it's not a fix. It's simply to confirm the issue. So if it's still working, after doing the heating it probably won't be for long and eventually you will need to get it properly fixed.

@billcrunkhorn5602 2 месяца назад

What an excellent presentation, and thanks to you, my TV is functional again. Many thanks - I would have cried had I had to consign this TV to the scrap heap.

@NicksTVRepair 2 месяца назад

Just to make sure but heating up the processor is NOT the fix. Per the video that is simply used as a testing technique to confirm the processor is not properly communicating with the rest of the mainboard. To properly fix it, you need to reflow the solder joints between the processor and the PCB. We do have a flat rate service which comes with a 1 year warranty if you want to send in your board, we can fix it the right way. If you only heated the board, the TV will temporarily work and then go back to the same fault soon after.

@billcrunkhorn5602 2 месяца назад

@@NicksTVRepair Indeed, and I understand. I'm an engineer and I did reflow the BGA. This is not the first issue I've had on this TV - there were inductors on the display driver PWB which had dry joints, and these arcing took out the driver transistors and diodes. That was relatively easy to find though significant effort to repair. This BGA fault I would not have found without you. I suspect I may be using you in the future. Thanks again.

@NicksTVRepair 2 месяца назад

Oh nice! And yes the power supply can also have issues but sounds like you took care of it. Nice work. What did you use for the reflow?

@billcrunkhorn5602 2 месяца назад

@@NicksTVRepair I used a heat gun.

@NicksTVRepair 2 месяца назад

okay, well if you have repeat issues we can assist.

@rw4273 5 месяцев назад

Thank you!

@NicksTVRepair 5 месяцев назад

You're welcome!

@chrisknight6799 9 месяцев назад

Thank you worked a treat.

@NicksTVRepair 9 месяцев назад

You're welcome!

@bigdog8882 2 года назад

Nice Video's! Keep em coming.

@NicksTVRepair 2 года назад

Hey Bigdog8882 thanks for the feedback and thanks for watching. We should be putting out at least 1 in depth diagnostic and repair video per week.

@orlandochidi5210 Год назад

Thanks

@NicksTVRepair Год назад

No problem

@orlandochidi5210 Год назад

@@NicksTVRepair thanks once again, just fixed a 50inch with info from your video.

@michaelcoates3172 3 месяца назад

What a legend! Had a pz950 sitting around for about 6 years stored it away knowing it couldn’t have been a huge issue, done this and it works! Just need to send for repair now, I’m in aust tho so will search around. Thing is now it has no sound, I sure it used too, do you think I’ve damaged something? I’ve done all the obvious standard trouble shooting. Cables, settings etc. no sound on internal speakers or can I get a sound bar to work.

@NicksTVRepair 3 месяца назад

If it has no sound it most likely is just because there are still cracked solder joints between the CPU and the PCB. The heating of the CPU is not a repair it's a test for troubleshooting purposes. If you only heated the board then you didn't fix it yet. It needs to be reflowed using professional equipment to ensure long-lasting repairs as we do in the video. If you want to send in the mainboard for us to fix, we have a mail-in repair service linked in the video description. Our contact info is there as well if you have any questions.

@michaelcoates3172 3 месяца назад

@@NicksTVRepair thanks for the advice, turns out some genius left a plug off! You guys are in the USA though right? I’m down under, so logistics are an issue

@NicksTVRepair 2 месяца назад

We have people send us circuit boards and devices from all over the world. DHL shipping is affordable.

@mohindersembi7647 Год назад

Nike Thank you very much for your reply I checked all the the thermal resistors are fine and I have changed the capacitor C106 next to the relays which is blue rectangular new 330nk 275v x2 still both relays are clicking? This is very tricky fault and all the fuses are OK on the pcb and back of the board I checked small mosfet all reading OK and checked all diodes all are OK with your expertise what it could be and what else I can check please kindly if you have some time please kindly help me on this issue thank you very much for your time

@NicksTVRepair Год назад

Hello, Sorry I haven't gotten back to you sooner. I don't think I can assist further without having the power supply board in front of me.

@robnation2475 Год назад

Great info! I suspect the main board to be the issue with my 60PK550. Has sound no picture. Prior to a black screen the menu input screen would flicker when selecting HDMI or TV input etc (seldom/occasionally the tv would have a distorted/ghosting picture but only during fast movement video...like when an ice/figure skater moved around quickly). Hope to do this repair with the back off while still standing in the base/stand. Any thoughts? Thanks!

@NicksTVRepair Год назад

You have to remove the stand in order to remove the back cover. The TV will have to lay face down. I recommend using a couch, bed, or if you have a dining room table large enough, to put a few blankets or towels down to protect the screen and frame from scratches. Heating the mainboard with a hot air gun is not a repair, it was just used as a diagnostic technique. In order to fully and properly repair the mainboard, you will need to have it reworked.

@robnation2475 Год назад

@@NicksTVRepair Thanks. I'll just get a used main/input board I guess. Turns out the 60PK550 can be serviced on the stand with the back cover off. I just replace the Y buffers and found an actual new YSUS and the flickering HDMI input went away until starting it up cold. (the upper buffer fell apart/un-soldered itself at the screw lugs so I had multiple failures/problems) I was able to resolve the "ghosting issue" temporarily (for a full day or 2) by slightly backing out the screws near the RCA inputs (makes sense to me, "If" the input board is weak/flexing enough to create a 2nd HDMI "ghost" below the original?)

@mohindersembi7647 Год назад

Wow very nice video you are professional engineer I have lg 42pj550 TV the power supply issue I am not getting 17 votes and when you power up I just hear relay clicking I have replaced the D304 diode SB140 and the 3BR1565JF Regulator still the relay are clicking I checked all capacitor and ESR are fine can you please kindly help me on this issue thank you

@NicksTVRepair Год назад

Check the 2 thermal resistors at the top right corner of the board. Are they failed open? Have you disconnected the other boards from your power supply and plugged it in? What voltages do you get? The LG plasma power supply boards auto turn on when the mainboard is disconnected. If the power supply detects a fault such as a short on the VS line of the Y or Z sustain it will shut off or go into protection mode. So if you disconnect everything and then turn it on and works then you know the power supply is good. If it still doesn't work then you know it's the fault and not something else in line. Usually transistors go out on these, along with those thermal resistors I mentioned. If those aren't at fault, then the board will require more diagnostics and component level checks. I wouldn't be able to help much more without having the board in my hands.

@sylviamb2504 6 месяцев назад

Hi Nick! We currently have a big LG Plasma TV model 60PA5500-UG and we can hear sound, but no screen or picture! Would this be the same issue? Thanks in advance!

@NicksTVRepair 6 месяцев назад

I couldn't tell you with only that information, you need to do the diagnostic test like I showed you in the video with the jumper on the Logic board. If you get the color pattern test to show up then just as shown in the video your mainboard is indeed defective and needs to be replaced or repaired. You won't be able to fix it in the same way we do in the video since your mainboard has a different design and processor, so the heating-up trick won't work for your model, but at least you can confirm the mainboard is the fault. If you don't get the color pattern test then it means most likely one of your sustain boards or buffer boards is bad. At that point, you will need to do resistance and voltage checks to further identify the fault. If you still have issues and or questions on how to do that, reach out to us directly, I have our email and contact form linked in the video description.

@phortwuny 4 месяца назад

Is there an easy backlight test?

@NicksTVRepair 4 месяца назад

This is a plasma TV so there is no backlight test. The equivalent of the backlight test is the color pattern test that I show in the video. That is the easiest test you can do to identify if the panel is good along with the other boards excluding the mainboard.

@Tylerfixit Год назад

I have a 2014 LG 84 UB 9800 extremely rare TV it was $16,000 new I got it for free off of Facebook from an elderly that was going to a retirement home and the picture and video suddenly shut off. I tried the baking method didn’t work. The LG standby light upfront works you can hear it clicking everything seems to have voltage but absolutely no picture and no sound.

@NicksTVRepair Год назад

Sorry I can't help you if you tried baking your board.

@user-ol5rc3yv1b Год назад

Не знаю как пройдет с моим ТВ но все что я увидел это даже больше того что я ожмдал! В последнее время что RU-vid что Google стали очень много говна подгонять под запрашиваемое от него. И найти определенное что то стало сложней. Огромное вам спасибо.

@NicksTVRepair Год назад

Пожалуйста!

@TheSloppyGuitarist 2 месяца назад

Is this repair even worthwhile when LED TVs are so cheap nowdays?

@NicksTVRepair 2 месяца назад

Well of course I am biased but yes especially because of how cheap they make LED tvs today. This is a Plasma set, you won't be getting as good of quality with a regular 4k LED TV unless you are buying an OLED or QLED which cost a lot more than the cheap low quality picture sets you can buy at walmart. Those have low quality picture, due to bad contrast ratio and low quality parts.

@vernonbosshard9317 4 месяца назад

They don't design enough cooling into electronics, probably for a reason, planned obsolescence. My night owl security cam burned out the HDD a yr old, I bought a new drive and then noticed how HOT it was getting, because the case was not well ventilated and the processor was heating the insides like an oven, I put a fan on the processor and modified the case to breathe. They have to know this when they build and test it. Warranty is a yr, it will last a yr, good to go.

@NicksTVRepair 4 месяца назад

Yeah a lot of Plasma sets used to have fans in them, and the latter versions didn't. Not sure what happened there but same thing different product.