Liftchair.com Trouble Shooting Video 

Great video ...but please show or tell exact multimeter settings...kinda impossible without that info. Chair is stuck in reclined position, is there a way to hook a 12 volt battery to get it down

Thanks, but the music is very annoying as is the failure to separate out the individual items so that they might be distinctly seen.

Also not all meters have that sound alert setting like you said they did...

Have lift chair. Is there a fuse anywhere in the power supply??

i have this same unit in my power chair dont know the style of the chair and need another remote,can you tell me the style of the one you are showing on your video,need your help thanks

The motors on lift chairs rarely ever just "break"...don't dispose of your chair and buy a new one so quickly...my mother's lift chair/recliner was stuck in the recline position...I ordered a new remote control (her chair has the 5 pin corded remote) but that didn't help...so I turned the chair on its side...removed the motor and unscrewed the 5 screws holding the motor "innards" inside....a simple look at the fuse shown it was blown...a 2-pack of replacement "glass" fuses costs $3.00...her chair had 2 fuses attached to the motor circuit board...one was good the other blown out...after replacing fuse...re-installing the motor...and giving the motor tracks a liberal coating of white lithium grease the chair operates perfectly...after panicking about having to spend $200-$400-$600 for a new power-lift chair we had a good laugh at only spending $3.00 (not including the new remote for $16.00 which is being kept as a spare)

You refer to "this lead and this lead" when testing the motor, but where you're touching with the test leads in not visible. Please help. A little more info for those of us who have never used a multimeter?

This was very helpful.

Why is there conductivity on the hand control all the time, with NC or normally closed switches? I would think a remote with momentary switches would be NO, or normally open, and when you push the button it closes the circuit and allows current to flow through. Or is the remote connected to a delay of some kind?

Is the motor removable shaft a replacement item? My moms chair pin came lose because the clip pin came lose letting the plastic end bind up and shear off. Also it is a threaded insert .

Excellent job

thanks .everything was all good with the tests you showed and then I took the actuator seemed to be jammed so i removed the back of the motor and turned it down with my drill and behold the problem solved but I couldn,t have done it withot testing everything first.

I HAVE A 4 BUTTON HAND CONTROLLER ON MY RECLINER. I DON'T KNOW THE MAKE OF THE RECLINER OR THE CONTROLLER EXCEPT THAT IT SAYS "EASYLIFT" ON THE CONTROLER. THERE ARE 2 BUTTONS THAT LIGHT UP "LOCK AND UNLOCK". THERE ARE 2 MORE BUTTONS. 1SAYS "UP" AND THE OTHER SAYS "DOWN".. I HAVE ONLY BEEN USING THE UP AND DOWN BUTTONS TO LOWER OR RAISE MY HEAD (TO A STANDING POSITION OR A SLEEPING POSITION. THE CONTROLLER GOT JAMMED BETWEEN MY BODY AND THE RECLINER,. NOW THE UP AND DOWN BUTTONS ONLY MOVE THE ENTIRE CHAIR HIGHER OR LOWER. I DON'T HAVE A MANUAL. HOW DO I USE THESE BUTTONS? IS SOMETHING BROKEN OR IS IT JUST LEARNING HOW TO USE THE BUTTONS?

My Pyron Okin Deltadrive lift/recliner chair lifts/seats/extends/retracts footrest but doesn't recline. I'm suspecting a broken spindle nut. Do you have a video for checking/replacing that?

For the last few days I have been having an intermittent problem in which back tilt button does not work occasionally , is there an easy fix for this problem ?

Good morning this is not a comment but a question the wires connecting from the motor to the remote are exposed and damaged even though there is green light on the outlet box not able to work the chair can l replace the motor all together for it’s the wiring from the battery to the controller that is damage and is it simple to do

Hi, this actuator need lubrication?

my la z boy lit chair luxury delucts. I put it to the lift position and the motor stopped so I could not put it down, any help would be appreciated.

Thank you for the video. I have a leather 3-piece set (couch, loveseat and chair) that uses similar Okin motor and control system. My motor functions in one direction only (retract). I have it disassembled and can test it on different power supplies and switches, (this one was on the chair, verified switch and power supply function from the love seat switches). I figure the little switching supply board is faulty, but how do I check for sure? Seeing the motor spin one way but not the other surely means the motor is fine. And, will Okin supply me just that little controller? This thing was taken out by a power surge when lightning hit a power pole down the street.

where is the reset button on the motor can you please show me? it doesn't do anything no power at all if resetting it doesn't work the motor is probably bad please help?

I have a recliner that needs a new motor number is S/n201604220231-7 KTFSJ 420-1 is this possible to buy and what cost would it be ??

Gosh - Can you help me choose the correct actuator motor for my chair? Mine broke on a new chair and the seller doesn't replace the motor. So, I don't know which to buy now. I can't find the seller so I just need a new one. Can you help?

Granny has a tranquil ease chair model HC 2802 HM3 REV C LIFT CHAIR .I NEED TO KNOW PLEASE WHICH WIRE GOES WHERE REMOTE DETACHED FROM WIRE .IT'S A 8 PIN WIRE

is there any way to increase the speed of the lift for recliner. they are all too slow esp my mother's

Boa tarde eu minchamo ubiratan e gostaria de saber qual é a voltagem dessa fonte porque eu tenho uma cadeira do papai que tem o mesmo motor com o mesmo modelo de controle e quando eu a comprei não veio com a fonte e eu gostaria de poder comprar vc poderia min forma qual a voltagem certa

Our power recliner wont recline completely, the leg rest stops half way up and thus the back stops reclining at this point.

My brothers lift chair won't go in any position it's a Katrina the remote don't work how do you replace the remote

The one we just bought today is grinding and not lifting. How do I fix that problem?

The transformer on my mother's has ceased to output 25v~ as it should, so she's probably been lifting her piano with it again. Details to come. :)

Can you make a vid on how to fix the controller please. Let me know.

I ordered a block and found it impossible to fit onto the shaft. I have taken the unit apart and I suspect that there are different sizes of shafts and blocks. Is this so? I have tried to manually push the shaft into the block but find it impossible. Please help.

Is it possible to purchase a whole motor in the UK? Sorry to ask, but ive been looking everywhere! Thank you very much for your help.

It goes forward but not back ; you hear sound for going forward but nothing when pushbutton for backwards.

My dad has aFranklin lift chair, problem the motor runs but the mechanism does not move. What could the problem be. Thanks

The hand controller does not light. We replaced the batteries. Still it does not light. What do you recommend. My mother bought this chair in 2012. How much is a new hand controller? 1.28.000.002.59

I just replaced the motor but it won't lift my weight. Any idea? I only weigh 206 lbs

have catnapper powr lift recliner , remote cords were pulled out. four wires, white wire still attached, yellow, black and green are disconnected. where do I find a new or schmatcs for resolder? plz help

THANKS A MILLION GREAT VID.

My dad's lift chair will not start....what should he do???

If the leads to the motor read open (OL), does that mean the motor is bad?

My father who is 92, has a Pride Lift Chair, and yesterday it started to mess up on him, is will only go into the lift mode, and will not recline at all, what Can I do

my lift squeals going up and going down and I cant stop it from squeaking help,

PROBLEM. IF THE DOORBELL RINGS. BY THE TIME HAS TIPPED YOU OUT THE CHAIR, THE POSTMAN's FAR GONE. IN OTHER WORDS MUCH TO SLOW.