Line Output Converter Live Demo - KICKER UnMASKED - Shorts 

Awesome to see Ken in these videos! Former OKC BBY auto tech and proud to see him doing well! I could also listen to John talk tech all day!

You should test the Kicker Keyloc too. But we all know it will be clean like the other two kicker loc's, just be nice to see it on your bench

What a great demo 🤙🏽🔥🔥🔥🔥🔥

I use the Kicker KISLOC 2 on one of my systems and definitely worth it💯Very inexpensive and worth the extra 20 bucks over the cheap LOCs out there💯

question though why does the chart start on the left at 50 hertz? if we are going for bass 50 would be rare to use. Im curious what that chart would look like from 20 to that 50..

Nice, i just bought two of KISLOC2 :) Throwing out my currently NVX 4 channel high/low converter. Though my sub-amp supports highlevel on the rca input but i have not got the amp to turn on by the DC-offset feature. Trying with the rear channel. Might require to use the front channel for that.. so that isnt an option with this current setup. Got speaker pops sometimes when amps turn off. Really annoying. No pop when turn on. Though when i cycle the key they pop sometimes. subwoofer and door speakers. Since the Kicker KISLOC2 does not have any gain adjustment, how high might the outputs be then? Ill guess the gain adjustment will be on the amplifiers. Mine are quite hard to setup since the stereo display are not in numbers.. there is a bar that will fill up.. and every turn on the volume is a step so you need to count how many steps or how far you are from the displayed text. Not very accurate. My home audio pops the speakers too sometimes when changing settings in windows sound.. like the bit and that stuff. Please tell me more about the Kicker KISLOC2 :) any advices? tips and tricks?

hi folks at Kicker , just 1st wanted to say thanks for all your replies to everyone , its nice to see a company actually communicating and helping the public so good job on that one , 2nd have a question of my own ,im running a cheap loc at the moment (vibe loc) which is being fed its signal from the output to the factory underseat subs (bmw 5 series e60) from the factory amp , so my question is if i wanted to get the keyloc 2 loc am i best to stick with the sub output signal from the factory amp or am i best taking the signal from the full range speaker signal fitted to the rear deck for the keyloc 2 to work properly with all its dsp ? ps im only needing the loc to give me an rca output for a mono amp to feed a sub thats only ever going to be running a aftermarket subwoofer , thanks in advance for your help as i wasent sure if the keyloc 2 required a full range signal or if it was happy enough with a i assume a filtered signal this is going to the factory subs ? thanks

So If Im understanding this right, I can just add RCA ends to my rear speaker wire and plug in to my Kicker CX360.4 Amp? I wont need to use an LOC? My after market Pioneer is a cheaper one that only allows for one rear output or Sub (not both) and Front rca. Im going to run the Amp bridged for the sub and the other for the rear speakers. However Im confused on how I should connect the rear speakers or the amp using just one set of rca cables. Was going to run the sub off the one rear output and then use the speaker wires using rca to connect the rear. Thanks for any help for this new-b

I’m using the kisloc2 and getting a lot of engine noise induced. I’ve checked my amp ground, swapped rca cables etc but cannot get a clean signal out of this device. How important is location of loc? Mine is very close to my factory head unit. Jeep Wrangler if that matters. Also. I bought two kisloc2s and one of them never worked out of the box.

so do you guys recommend using speaker wires instead of RCAs? Thanks for the video

Great Education, Thanks 1. What is the differences between KEYLOC and LC2i Pro? This is my current hurdle moving forward on my purchase. Help?

I was going to do 2 sundown e 12s in a 2019 Toyota Camry. Keeping factory head unit so which loc would you recommend was looking at the kicker one on right side in this video would that work good for me? Only going to run a 1500 watt amp

Lol chemistry between these guys haha

I’m going to use the kisloc2 for my CompC 10 inch with an enclosure 300 watt with the CXA300.1 would you recommend the K series over the Kisloc2 ?

So how does using a kicker kisload affect my signal coming out of my factory f150 radio and going into my dsp? My radio clips at 8.5 volts by the way.

2020 challenger all oem audio equipment. I have taped into rear deck speaker with speaker wire with rca ends straight into mono-block amp. Sounds decent. But would I benefit adding a loc? I have a kisloc but skeptical on using it. Any advice would be so appreciated

I'm using one of these kickers high to low adapters with a crunch 1100 amplifier and I can't get it to sound good was getting ready to blame the high to low adapter until I saw a couple of videos here thanks for the videos I know nothing about crunch can anybody give me any words opinion how about crunch amplifiers

I just got a kisloc2 and a kisloc and both of them give me an annoying noise that I can't use them. I have a infiniti fx35 and I had to throw both kisloc and use another brand. Please help me out.

So I have the RCD360 Headunit and it doesn’t have RCA on the back so would I be better off using the KISL 2ch. Speaker-RCA Converter or the KISLOC1/ KISLOC2 ?

I need that kicker loc

I bought a Kicker 46KISLOC2, It turns on after the car/radio been off for like 10 mintues. The amp gets hot and goes into protect mode. You think its defective? Its on a 2017 camaro.

That old guy doesn’t let the young guy talk…

Nice loc👍

What’s the difference between KISLOC and KISLOC2?

Any idea on why no signal for subwoofer? Wired everything amp turns on etc. Just no bang?

I have the Kicker Key 200.4 in my 2021 Nissan Frontier Crew Cab. What 6x9 for the front doors should I use? Also what component sets does kicker have. I've used the DS and wasn't happy with the results at all. Am I underpowering?

The funny thing is they say cheap lol that kicker is at most 29.99 I just got mine in ebay for 19.99 lol I'm ditching the nvx one I had its garbage cant even get 1v out of it and it costed the same as this thing.

So that is a factory head unit? How would it compare to a LC model?

What is the difference of between kisloc VS kisloc2?

suena exelente pero tiene un par de detalles que tienen que solucionar, en algunos casos solo entrega salida por un canal rca la solucion es conectar las dos entradas juntas del convertidor a un solo canal de bocina, y el otro problema es el molesto ruido que hace al encender y apagar el amplificador, mande un correo a kicker y ellos me dijeron que lo regresara por que estaba defectuozo, pero luego confirme que es un defecto de fabricacion por que mande comprar otro de una tienda diferente y el nuevo tiene los mismos problemas, es raro por que tuve que regresarlos pero me quede con ese mal sabor de boca por que efectivamente suena exelente y totalmente flat

It says it goes up to 8volts whats tge minimum setting my amp likes 2 and under i e got the small loc

What model are your kicker converters?

Just bought the audio control lc2i and installed it.... Very disappointed with the low lows. It definitely cuts the very lowest region, below 33 hz, and I've had to use my DSP to bring it back. The Audio control LC2i also induced noise into the mids and highs, when the accubass was "kicking in". When turned way up, it's SUPER noticable. Great for the 99% of the average users that probably won't notice, but for those with big power and tuned to crush lows, it's garbage. It's also garbage for people that want pure sound quality. It adds distortion, upper midrange and higher, I could hear audible noise when accubass was active. I would have gone back to the cheap junk dollar store loc I had, to get my lows back and "clean sound". The signal was stronger, gains set at minimum on all amps, so it did it's job there. I'll give it it's small bit of credit there. Those of you wanting to add amps, if you like, and listen to music with low low bass, below 30hz, the audio control lc2i WILL NOT give you what you want. If your wanting top notch clean signal, the lc2i also won't give you what you want, UNLESS you turn accubass off, completely. Waste of $ for me, I'm throwing it in the garbage where it belongs and going with something else. Hope this helps someone not waste $ like I have. $100+ right in the fucking trash. I'll post back when I find something that truly gives your amps ACTUAL clean, high voltage, FLAT, signal. I'll be looking into the device in the video. Thanks for the upload. Appreciate the time you take to show others how important an actual unmolested, clean signal is. When you have a lot of power on tap, it's absolutely everything. I can't stress that enough. Your driver's will thank you with longevity and proper sound..

Does adding a loc allow an amp to output even more power bcuz the loc increases input voltage which an amp then amplifies?

Factory head units not only have bass cutoff limiters but they also have frequency DSP filtering. So this whole video is pointless. If you have an after market head unit you have 2 volt - 5 volt RCA outputs which are exactly what the amplifier inputs are designed to work best with.

Quit interrupting.it’s unwatchable with the guy on the left in this.