Line Sizing Calculations | Process design engineering | Chemical engineering | PAYO'S Academy

Подписаться 6 тыс.

Просмотров 22 тыс.

50% 1

Basic Concepts Of Chemical Engineering | Chemical Process Design Engineering | Interview Questions
Welcome back to our RU-vid channel, where we bring you the latest updates, insightful discussions, and entertaining content. Today, we're kicking off an exciting new series that will take you on an incredible journey of discovery, learning, and entertainment.
In this video, we dive deep into the world of line sizing calculations, a crucial aspect of engineering and design in various industries, including oil and gas, chemical, and process engineering.
📊 What You'll Learn:
The fundamentals of line sizing and its importance in fluid transport systems.
Key parameters to consider, such as flow rate, fluid properties, and pressure drop.
Step-by-step calculation methods for finding the right pipe diameter.
Practical tips and tricks for real-world applications.
Case studies and examples to illustrate the concepts.
Whether you're a student, engineer, or simply curious about the science behind fluid transport, this video will equip you with the knowledge and skills needed to excel in this field.
Don't forget to like, share, and subscribe for more informative content on engineering, science, and technology. If you have any questions or topics you'd like us to cover in future videos, please leave them in the comments below.
Process Design Engineering Full Course Free: www.youtube.co...
Unit conversion in chemical engineering:
• Unit Conversion | Chem...
Role of chemical engineer-
• Role Of Chemical Engin...
Chemical engineering scope 2030:
• Chemical Engineering S...
Why to join Process Design Engineering Course
• Role Of Chemical Engin...
Career opportunities after chemical engineering:
• All About B tech In Ch...
Role of chemical process Engineer in EPC:
• Chemical Process Desig...
Top 10 chemical engineering colleges in maharashtra
• Top 10 Chemical Engine...
Top 10 chemical engineering colleges in Pune
• Top 10 Chemical Engine...
Top 10 chemical engineering colleges in Mumbai
• Top 10 Chemical Engine...
#chemical #processdesign #chemical #gate #mtechprojects #oilandgas #careerinchemical #unitconversion #interview #interviewquestions #interviewtips #chemicalprocess
Knowing the basic concepts of chemical engineering is essential because:
1. Understanding the fundamental principles enables efficient design and operation of chemical processes.
2. It provides a solid foundation for troubleshooting and problem-solving in various industries.
3. Safety in chemical processes relies on knowledge of concepts like hazard identification and risk assessment.
4. Basic concepts help in optimizing processes to improve efficiency and reduce costs.
5. Knowledge of chemical engineering principles is vital for environmental sustainability and waste management.
6. It facilitates effective communication and collaboration with other professionals in the field.
7. Basic understanding of chemical engineering allows for informed decision-making in process selection and equipment design.
8. It opens up career opportunities in industries such as oil and gas, pharmaceuticals, food processing, and renewable energy.
9. Understanding chemical reactions and thermodynamics aids in product development and innovation.
10. Overall, familiarity with basic chemical engineering concepts empowers individuals to contribute to technological advancements and address societal challenges.
#chemicalengineering #processdesign engineering #chemicalengineeringcource #payosacademy

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 130

@rohandamle4929 11 месяцев назад

Finally 🎉🎉got the series what we wanted for so long🙏🙏 sir plz make the series on process engineering 🙏🙏like heat exchanger design, column design, CV, PSV sizing. Full support from iur side👍👍👍👍

@PayosAcademy 11 месяцев назад

Thank you Rohan for showing trust on us. We have already started the free course of process design engineering free of cost on RU-vid. You are right like you so many other students are searching for this content, your one share can help them to get what they want. Sure, we will cover all the points you have mentioned in your comments. Your this intrest motivate us to bring more informative videos. Thank you. Do Subscribe, Enjoy Learning 👍

@ankushchoubey839 9 месяцев назад

Bhai maaa kasam kitne jagah muh mara hai na ese content ke liye kahi nahi mila , really appreciated ❤

@PayosAcademy 9 месяцев назад

Best comment ever received on RU-vid. This made us very happy that our efforts are in right direction and you find our content informative and useful. Stay tuned with us. Enjoy learning 👍

@Sqb1998 10 месяцев назад

After long time i found this amazing video .. Thanks payos Pls make video on distillation column

@PayosAcademy 10 месяцев назад

Thank you for your showing trust. We will definitely try to be worth for your trust. Sure, we will definitely try to provide you the content on distillation column as soon as possible till that enjoy our other videos on pump, p&id etc hope you like the content. Thank you. Enjoy learning, All the best 👍

@bhavinjagtap1239 Год назад

This is highly understanding video on youtube for line sizing, so much hardwork from you, keep it up

@PayosAcademy Год назад

Thank you bhavin. Your words will definitely motivate us to bring quality content for you.

@PayosAcademy Год назад

If you like the content do subscribe and share with your closed ones. Thank you 🙏

@sahareshekhar3432 4 месяца назад

Yaar aise video bahut kam log banate hai, you really appreciate this work, thanks ❤❤ aise hi process engg. Pe video banate raho thaki hum bhi kuch shikh sake

@ashking5862 Год назад

Please upload the videos which you mentioned in the course as early as possible,it is more detailed discussion about line sizing i ever seen on you tube or any source, please share such conteng

@PayosAcademy Год назад

Thank you for your kind words. It will definitely motivate us to bring quality content for you. Also we will consider your words and try to cover all the videos as soon as possible. Watch our latest video on tank sizing. Hope you will like the content. If you like the content do share with your friends. Thank you

@HindustaniNagrik 10 месяцев назад

Good information in detail way. Please make a detailed video by taking actual peoblem for solve line sizing so that it is easy for viewers to face interview.

@PayosAcademy 10 месяцев назад

Thank you for your valuable suggestion. We will definitely try to cover this in our upcoming videos. Thank you.

@rohandamle4929 11 месяцев назад

Could you plz make the video on gas & two phase line sizing?? By taking 1 example as well

@PayosAcademy 11 месяцев назад

Thank you Rohan for showing interest. We will definitely try to upload a video on gas and two phase line sizing as soon as possible. Thank you.

@amolwaghchoure5442 11 месяцев назад

Sir plz make video on line sizing using excel because it is not available on the you tube till date

@PayosAcademy 11 месяцев назад

Absolutely! Thank you for your wonderful suggestion. Get ready for an upcoming video on Excel-based line sizing calculations, scheduled for this week. We'll dive into the world of spreadsheets and engineering in a way that's both informative and engaging. Do subscribe and stay tuned with us for an insightful weekend of learning! 📊🔍 All the best, Enjoy Learning 👍

@dcetian85 7 месяцев назад

That's the best line sizing lecture I have ever seen. It's very comprehensive. Keep up the good work please

@PayosAcademy 7 месяцев назад

Thank you Asif for your appreciating words. We will definitely work hard to be worth for your trust. Enjoy learning. All the best 👍

@shiveshgautam2188 11 месяцев назад

Nice informative Vedio…. Pls increase the frequency of uploading Vedio…..

@PayosAcademy 11 месяцев назад

Thank you for your appreciating words and wonderful suggestion. We will definitely try to increase the frequency of uploading videos. Watch our latest video on line sizing calculations, hope you will like the content. Thank you, Enjoy Learning 👍

@dipak_telang Год назад

You make learning fun,I always look forward to your tutorials

@PayosAcademy Год назад

Thank you Deepak. Very happy to hear that you enjoy learning with us. We will definitely try to meet your expectations and stay commited for quality content. Thank you.

@tapendukoley9942 Месяц назад

Thank you sir for the informative videos. One request if possible during running your video the hindi dilogue showing on screen disturb some times to understand some points kindly ommit it .

@PayosAcademy Месяц назад

Sorry for your inconvenience. You can stop that subtitles by clicking CC button on top right corner of your video screen. Hope this will help you. If not please feel free to connect us. We will surely work on it to enhance your learning experience with PAYO'S Academy. Thank you 🙏

@anuragmodi991 Месяц назад

Excellent lecture. What is the equation to be used for line sizing for compressible fluids like air and gases.

@AbhaySingh-u5h3o 2 месяца назад

Great initiative sir, Keep the great work going. Its really helpfull for the people who really wanna learn process engineering calculation. You are doing great job sirji

@PayosAcademy 2 месяца назад

Thank you so much 🙏 If you like the content please share our RU-vid channel with your friends. Thank you 👍

@santoshghosh8752 11 месяцев назад

what is the meaning of pressure drop Ap(100m), i have seen in many pumps dishcharge pressure is more than 20 kg cm2 but you are saying 0.45 .Kindly explain.

@PayosAcademy 11 месяцев назад

Good question Santosh. We have tried to highlight your doubt in our latest video on Pump sizing. Please go through it. Hope this will help you. If not feel free to get back to us. Thank you. Enjoy learning 👍

@sumeetpathak345 7 месяцев назад

Good knowledge as well as teaching skills. Students as well as professionals are inspired to learn from such detailed video.

@PayosAcademy 7 месяцев назад

Thank you Sumeet. Your appreciating words will definitely motivate us to bring more informative and quality content for you. We will definitely work hard to be worth for your trust. Thank you. Enjoy learning 👍

@pratikudgave3985 Год назад

Very informative and helpful video considering industrial applications for Process or chemical engineer. Thanks!....

@PayosAcademy Год назад

Thank you Pratik for your valuable words. This will surely motivate us to bring quality content for you. Thank you.🙏

@quotesonlight1022 4 месяца назад

Please aap aapka ye series chalu rakho , ye really helpful h

@satyashilchaturvedi339 3 месяца назад

Very nice & excellent teaching.God bless you!

@PayosAcademy 2 месяца назад

Thank you so much Satyashil.

@mk123ify 29 дней назад

Thanks a lot for the information But I think in line losses : K Value method formula should be f(L/D+Sigma*K)v2/2g...Bracket is missing

@vijayshankarpandey2063 8 месяцев назад

Thank you sir. Plz keep going on. It's channel will be the best process design channel.

@PayosAcademy 8 месяцев назад

Thank you Very much Vijay. Thank you for showing trust on us. We definitely work hard to be worth for your trust. Thank you.

@aruncs6196 10 месяцев назад

Hi sir, very informative video, can you share excel sheet for line sizing, it will be very helpful for understanding more.

@PayosAcademy 10 месяцев назад

Sure Arun. Please share your email id on our LinkedIn post or DM us on Instagram. Thank you. All the best 👍

@mrudulap2282 2 месяца назад

before isometrics is final stage for department na, without providing line size in P&ID how they will give iso??or is there any other type of isometrics is there???please clarify it.Thank you

@PayosAcademy 2 месяца назад

It's true and forth process. In feed stage line length and elevations are considered based on plot plan and based on that tentative line size is finalized based on that piping department draw actual pipe routing and again in detail engineering the line sizing is done based on feed stage isometrics and if the losses are more then give comment on p&id and isometrics accordingly piping department will update isometrics. Hope this will help you. Stay tuned with us. Enjoy learning 👍

@mrudulap2282 2 месяца назад

@@PayosAcademyThank you for your reply. so in feed project we do based on plot plans. for this which department develope plot plan if process on what basis from PFD or some other thing?? In detail engg project if line have more fittings piping dept will in form to process?how they will know no of fittings are more than the no of fittings considered while line sizing?? please clarify.Thank you.

@zen.voyage 10 месяцев назад

Hi sir, very nice video, could I ask you that where the table "Line Sizing Criteria - PD and Velocity" comes from? I searched a lot but I can't find out the international standards of this criteria. Please help me, thank you.

@PayosAcademy 10 месяцев назад

Good question Zen. It is not standard or expected to stick with the same values provided in this video they may slightly vary from company to company. Theses values are derived from good engineering practices and considering concept of erosion velocity. Hope this will help you.

@PayosAcademy 10 месяцев назад

For more details you can refer a book " Rules of thumb for chemical engineers" by 'Carl Branan'.

@k__S366 12 дней назад

Excellent sir, but solve the example in brief and then give another examples as assignment.

@PayosAcademy 20 часов назад

Thank you for your valuable suggestion. We will work on it at the earliest. Stay tuned with us

@dipankargayen4501 2 часа назад

thanks a ton

@ChukuDorcas 5 месяцев назад

thank you for this line sizing video, however can i get one with English Language for better understanding. thank you

@PayosAcademy 5 месяцев назад

Thank you for your valuable suggestion Chuki. We have received same suggestion from many subscribers. We will surely work on it and create a separate series in English. But it will take time. Thank you for your understanding. Enjoy learning 👍

@Shiladitya11 7 месяцев назад

Very good informative videos,easy for understanding also❤ Is there any books for study mor details on these topics

@PayosAcademy 3 месяца назад

You can refer Perry's handbook.

@erbunny7591 11 месяцев назад

Hydraulics per video bnaw jaldi plese with image example animation

@PayosAcademy 11 месяцев назад

Your request is our command! Thank you for your valuable words. Pump hydraulics video coming this weekend, just for you! Stay tuned for an educational journey. Enjoy learning, All the best 👍

@PayosAcademy 11 месяцев назад

We liked your suggestion and implemented also. Do watch our latest video on pump hydraulics. We are also planning to implement animations in upcoming videos. Thank you. Enjoy learning 👍

@erbunny7591 11 месяцев назад

Thank you sir@@PayosAcademy

@PayosAcademy 11 месяцев назад

You are most welcome. If you like the content do share with your friends.

@NaushadKhan-97 2 месяца назад

For by gravity line for how much flow rate consider is it total MFR or either one.

@PayosAcademy 2 месяца назад

Thank you for your valuable words Nausad. For gravity flow line sizing you have to consider total MFR but velocity you need to consider is 1 m/s. Hope this will help you. All the best.

@krantikumarwaghmare3296 9 месяцев назад

Please solve expamle by using formula (Not in excel) as well so it will clear remaining doubt.

@PayosAcademy 9 месяцев назад

It's a great suggestion Kranti. Let us finish on going topics we will surely take one example with manual calculation. Thank you. Stay tuned with us.

@soundaryakulkarni6229 11 месяцев назад

Hi you didn't mention anything about Mach no, where as i think it is also an imp criteria

@PayosAcademy 11 месяцев назад

Good question Soundarya. In this video our aim was give overview about line sizing and focus on liquid line sizing. Here the velocity is very low hense we have considered only momentum criteria i.e. rho.v2 and that is sufficient for liquid line sizing. If we go for two phase sizing or gas line sizing where velocity is comparatively high in such cases Mach number plays crucial role while sizing. We will definitely cover this concept in our upcoming videos. For knowledge purpose: The Mach number is used to assess compressibility effects in fluid flow. When the Mach number is significantly greater than 0.3, the fluid flow is considered compressible, and factors such as changes in density and speed of sound need to be accounted for. Hope we get you clearly and tried to answer it correctly. If you find any query please feel free to get back to us. We will very happy to answer such technical questions in future too. Stay tuned with us. Thank you. All the best. Enjoy learning 👍

@rameshwarpatle2705 Месяц назад

Thanks Sir.. Pleas aise hi video banao... 🙏🙏🙏🙏🙏🙏

@PayosAcademy Месяц назад

Sure Rameshwar. We will cover all the important concepts and topics related to process design engineering. Hope you like the content. All the best 👍

@akash-ru7jf 8 месяцев назад

In line sizing Do we need to consider and add pressure drop due to elevation and equipments and then look for pressure drop criteria. Or Just consider the pressure drop due to frictional loss in pipe and look for criteria.

@PayosAcademy 8 месяцев назад

Good question Akash. In line sizing if you are only concerned with diameter of pipe then we will not consider pressure drop due to elevation but if you want determine downstream pressure after line sizing then you must consider elevation loss. Hope this will help you. Thank you.

@akash-ru7jf 8 месяцев назад

@@PayosAcademy can you make video on control Valve sizing.

@khalilurrahamandewan9047 8 месяцев назад

Really a very good video I really appreciate you sir

@PayosAcademy 8 месяцев назад

Thank you for your appreciating words Khalilur. Your words will definitely motivate us to bring more informative and quality content for you. Enjoy learning. All the best 👍

@NaniA-v9y 11 месяцев назад

Can we aspen hysys for line sizing?

@PayosAcademy 10 месяцев назад

Good question. Yes we can use Aspen hysis for line sizing based on velocity and pressure drop calculation. Enjoy learning. All the best 👍

@rohanpujari3567 11 месяцев назад

informative and well explained video

@PayosAcademy 11 месяцев назад

Thank you for your kind words, Rohan. Your valuable comments inspire us to keep pushing the boundaries of quality and informativeness of our videos. We appreciate your support and are grateful for you being part of the Payos Academy community. We're delighted that our content contributes to your eagerness to learn. Feel free to share our videos with your friends friend to help them on their learning journey too. Together, we can make a difference!

@raghavsharma7084 11 месяцев назад

thank you😭

@PayosAcademy 11 месяцев назад

You are most welcome Raghav. We believe these are happy tears, if so you need to oversize the tank. Thank you. Enjoy learning 👍

@24naser 2 месяца назад

so perfect line sizing

@PayosAcademy 2 месяца назад

Thank you 🙏

@ravinarayantiwarispritualf785 Месяц назад

Very nice sir ji

@RavindraWankhede-c8o 11 месяцев назад

Excellent 👌

@PayosAcademy 11 месяцев назад

Thank you Ravindra. Your appreciating words will definitely motivate us to bring more informative and quality content for you. Thank you. Enjoy learning 👍

@techshiv8107 7 месяцев назад

Good job sir keep going we will support you

@PayosAcademy 7 месяцев назад

Thank you so much. We are also planning to start a new series for interview questions hope you like it. Enjoy learning 👍

@tirthrajchavan6331 6 месяцев назад

@@PayosAcademyyes sir that will certainly be very helpful for professionals.. if possible do try to make it EPC and oil n gas industry oriented. Again thanks for all the content.

@abhishektiwari-ny8hq 10 месяцев назад

Informative video 😊

@PayosAcademy 9 месяцев назад

Thank you Abhishek for your appreciating words. This will surely motivate us to bring more informative content for you in future. We will be happy to hear more from you. Stay tuned with us. All the best 👍

@waverunners237 7 месяцев назад

Thank You for free content bro ❤

@PayosAcademy 3 месяца назад

You are most welcome 🙏

@dattagiram6938 5 месяцев назад

Sir iska excel calculation kese karte vo bhi tutorial mil jata to majja hi aa jata.

@PayosAcademy 5 месяцев назад

Yes Datta. We have already covered this part. Please go through our process design engineering course playlist Hope this will help you. Thank you. Enjoy learning.

@surajkarmali5742 13 дней назад

Very helpful for poor students who has no money for course with certificate

@PayosAcademy 20 часов назад

🙏🙏🙏

@avinashmokashe527 7 месяцев назад

Thank you.❤

@PayosAcademy 3 месяца назад

Thank you 🙏

@murarilal-ww6vc 10 месяцев назад

Sir how calculate maximum flow of line . Ex-2 inch line maximum flow

@PayosAcademy 9 месяцев назад

It will depend on where the line is located. If it is in pump discharge consider max velocity from our velocity criteria and calculate by using formula Q= V * A Hope this will help you. If not please feel free to get back to us. Thank you

@prajaktananote4063 9 месяцев назад

Well done

@PayosAcademy 9 месяцев назад

Thank you Prajakta. Hope you like the content. If you like the content please share our RU-vid channel with your friends. Thank you. Enjoy learning. All the best 👍

@HonestHai-HE 2 месяца назад

Hats off to you sir

@PayosAcademy 2 месяца назад

Thank you so much 🙏

@mamooransari526 Год назад

Agli video kab aayegi?

@PayosAcademy Год назад

Thank you Mamoor for showing interest. Our next video will be on tanks and vessels sizing, I will bring it ASAP.

@PayosAcademy Год назад

If you like the content do subscribe our RU-vid channel and share with your closed ones. Thank you 🙏

@aashutoshvisavadia5551 7 месяцев назад

Which reference book is considered for this ???

@bhavyac 3 месяца назад

Perfect video

@PayosAcademy 3 месяца назад

Thank you 🙏

@ssoplengg-qltyctrl1278 7 месяцев назад

sir ,distillation column design?

@PayosAcademy 3 месяца назад

Sure. Stay tuned with us. Enjoy learning 👍

@ssoplengg-qltyctrl1278 7 месяцев назад

superbly superb

@PayosAcademy 3 месяца назад

Thank you 🙏

@ranjitpatil2798 21 день назад

Can i get ppt plz

@samsawant-208 10 месяцев назад

If satuated steam density 0.590 kg/ m3 and consider velocity 50 m/s how its above momentum criteria 15000 ?? Pls answer.

@samsawant-208 10 месяцев назад

Plz sir answer

@PayosAcademy 10 месяцев назад

Good question Sam. It will definitely not above momentum criteria but still we do not consider such higher velocity for Saturated steam line sizing because higher velocity leads to more pressure drop and if pressure drop increases there will be chances of two phase flow. But in case of superheated steam we can go for such higher velocity. Hope we understood your question clearly and tried to answer you correctly. If not please feel free to get back to us. Thank you.

@samsawant-208 9 месяцев назад

Thank you so much sir.

@akashbodekar2834 8 месяцев назад

Lots of Love bro🥰🥰

@PayosAcademy 8 месяцев назад

Thank you Akash. We are very happy that you find our content informative and useful. Enjoy learning. All the best 👍

@affanbhaijaan65 3 месяца назад

15mm 25 mm 40 mm 50 mm 65 mm 100 mm 150 mm 200.mm 400 mm 600 mm 800 mm

@PayosAcademy 2 месяца назад

Thank you for sparing your time to write here, this will surely help our viewers who read comments while watching videos. Thank you.

@vishalmote2821 3 месяца назад

can i get this ppt file

@waverunners237 7 месяцев назад

Aap Maharashtra se ho kya ?

@velavan948 7 месяцев назад

Can u please explain in English

@PayosAcademy 7 месяцев назад

Thank you Velavan for your valuable suggestion. We will try to create a seperate playlist in English. Till that you can enjoy English subtitles. Hope it will help you. Thank you.

@24naser 2 месяца назад

line sizing

@PayosAcademy 2 месяца назад

Hope you like the content. stay tuned with us. Enjoy learning, All the best.