Tank and Vessel Sizing | Process design engineering | Chemical engineering | PAYO'S Academy

Подписаться 5 тыс.

Просмотров 10 тыс.

50% 1

Tank and Vessel Sizing | Process design engineering | Chemical engineering | PAYO'S Academy
"Welcome to our in-depth guide on Tank and Vessel Sizing Calculations in Process Design Engineering! Whether you're a student, engineer, or simply curious about the intricate world of chemical and mechanical design, this video is your gateway to understanding the critical process of sizing tanks and vessels for various industrial applications.
In this comprehensive tutorial, we'll walk you through the fundamental principles and methodologies used in the field of process engineering. We'll cover the key factors that influence tank and vessel sizing, including capacity, material selection, pressure, temperature, and safety considerations. We'll also explore the practical tools and software commonly used for these calculations.
By the end of this video, you'll have a clear grasp of the calculations and design considerations required to ensure efficient and safe storage and processing of liquids and gases. So, whether you're a budding engineer looking to enhance your knowledge or someone who's simply interested in the fascinating world of process design, join us as we delve deep into the art and science of Tank and Vessel Sizing Calculations.
Don't forget to like, share, and subscribe to stay updated with more informative content on process design engineering. If you have any questions or topics you'd like us to cover in future videos, feel free to leave them in the comments below. Let's embark on this educational journey together!"
Process Design Engineering Full Course Free: www.youtube.co...
Unit conversion in chemical engineering:
• Unit Conversion | Chem...
Role of chemical engineer-
• Role Of Chemical Engin...
Chemical engineering scope 2030:
• Chemical Engineering S...
Why to join Process Design Engineering Course
• Role Of Chemical Engin...
Career opportunities after chemical engineering:
• All About B tech In Ch...
Role of chemical process Engineer in EPC:
• Chemical Process Desig...
Top 10 chemical engineering colleges in maharashtra
• Top 10 Chemical Engine...
Top 10 chemical engineering colleges in Pune
• Top 10 Chemical Engine...
Top 10 chemical engineering colleges in Mumbai
• Top 10 Chemical Engine...
#chemical #processdesign #chemical #gate #mtechprojects #oilandgas #careerinchemical #unitconversion #interview #interviewquestions #interviewtips #chemicalprocess
Knowing the basic concepts of chemical engineering is essential because:
1. Understanding the fundamental principles enables efficient design and operation of chemical processes.
2. It provides a solid foundation for troubleshooting and problem-solving in various industries.
3. Safety in chemical processes relies on knowledge of concepts like hazard identification and risk assessment.
4. Basic concepts help in optimizing processes to improve efficiency and reduce costs.
5. Knowledge of chemical engineering principles is vital for environmental sustainability and waste management.
6. It facilitates effective communication and collaboration with other professionals in the field.
7. Basic understanding of chemical engineering allows for informed decision-making in process selection and equipment design.
8. It opens up career opportunities in industries such as oil and gas, pharmaceuticals, food processing, and renewable energy.
9. Understanding chemical reactions and thermodynamics aids in product development and innovation.
10. Overall, familiarity with basic chemical engineering concepts empowers individuals to contribute to technological advancements and address societal challenges.
#chemicalengineering #processdesign engineering #chemicalengineeringcource #payosacademy #chemicalengineering #engineering #chemistry #mechanicalengineering #science #chemical #petroleumengineering #petroleum #energy #civilengineering #crudeoil #oil #schlumberger #oilandgas #oilandgasindustry #chemistrylab #chemicalengineer #oilfield #technology #gate #oilandgaslife #oilindustry #physics #oilpatchlife #drillingrig #oilpatch #industry #scienceexperiment #lab #chemicalguys

Опубликовано:

15 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 75

@wolfw1226 11 месяцев назад

Thanks for the video sir. I'm so appreciate you. This is best vessel sizing video ever seen

@PayosAcademy 11 месяцев назад

Thank you for your appreciating words, these will definitely motivate us to bring quality content in future. If yo like the content do share with your chemical engineering friends. Thank you, Enjoy Learning 👍

@santoshghosh8752 11 месяцев назад

undrestanding label is very good. please make next part for vessel with example briefly. we understand the theory , example makes us confident. sir god bless you, this type of work very very help full.

@PayosAcademy 10 месяцев назад

Thank you Santosh for your valuable suggestion. We will definitely make our next video based on your comment. Enjoy learning 👍 If you like the content do share our RU-vid channel with your friends. Thank you.

@ajinkyagaikwad457 11 месяцев назад

Great video sir . Thank you so much for this intiation of process design course .

@PayosAcademy 11 месяцев назад

Thank you for your appreciating words Ajinkya. Just share our videos with your other chemical engineering friends. Thank yo.

@FUbaidullahR 11 месяцев назад

Informative sir

@PayosAcademy 11 месяцев назад

Thank you. Your words will definitely motivate us to bring quality content.

@raphaelragu 9 месяцев назад

Very informative video Brother, definitely nice one , please put more designing video's like this and my small suggestion is please put video in English bro , and please put tank sizing example video Brother Thankyou, thank you very much

@khalilurrahamandewan9047 6 месяцев назад

Very informative thank you for this video

@sagarsuroshe5030 Месяц назад

Sir, Thank You So Much for your efforts for students like us who dream to be process engineer.

@PayosAcademy 28 дней назад

Thank you Sagar for your appreciating words this will motivate us to bring more informative and quality content in future. Thank you 🙏

@nehajaypalhore9754 11 месяцев назад

Excellent 👌

@PayosAcademy 11 месяцев назад

Thank you so much for your kind words! Your motivating words inspires us to keep working hard to bring more informative content. Thank you. Stay tuned, and let's continue this amazing journey. 🚀"

@user-nq2iy9od6u 11 месяцев назад

Excellent 👌

@PayosAcademy 11 месяцев назад

Thank you Ravindra for well recognising our efforts. Watch our latest video on pump hydraulics we hope you like it. Thank you. Enjoy learning 👍

@dnyandipjadhav5878 Месяц назад

Sir, please do one video for basis used in sizing of compressors. Also surge analysis required for same.

@PayosAcademy 28 дней назад

Thank you for your valuable suggestion Dnyandip. We will surely cover this important topic in our upcoming videos. Thank you. Stay tuned with us 👍

@AftabAlam-lc7sb 10 месяцев назад

👍good bhai zaberdast , i am from karachi , really brother your teaching method is excellent

@PayosAcademy 10 месяцев назад

Thank you Aftab for your appreciating words. This will surely act as a catalyst to enhance informativeness and quality of our videos. Thank you. If you like the do share our RU-vid channel with your friends. Enjoy learning. All the best 👍

@anjalidalvi 6 месяцев назад

Such n excellent information Payos academy.Thank you so much for the guidance🙏🏽

@dyavarashettysaipriya8111 9 месяцев назад

your "Hello Dostho" will cheer us to learn more sir. Thank you for amazing lectures

@PayosAcademy 9 месяцев назад

Thank you Saipriya. We are happy to hear that you find our content informative and engaging. Your one share can also cheer your friends to learn more. Please share our RU-vid channel with your friends. Thank you for being with us. We will definitely try to bring more informative content for you. Enjoy learning 👍

@bhartiverma9939 Месяц назад

Hi Payos !! Superb work. Could you please explain why the inlet pipe is dipped in the tank ? When to dip and when not? Thanks a ton:)

@PayosAcademy 28 дней назад

Very good question Bharati. I think we have answered you earlier but here it will help our other viewers too- Mostly dip pipe is used where we are dealing with addition of hazardous chemicals in reactor to avoid hazardous vapour release or if we want good mixing ( Sometimes recirculation lines also dipped in for better mixing) Thanks for showing interest. Enjoy your learning journey with PAYO'S Academy👍

@AkashSharma-ij1ed 11 месяцев назад

Very nice and helpful , please make a video on vent sizing

@PayosAcademy 11 месяцев назад

Sure we will definitely try to cover this topic. We know you are also waiting for costing video. We will try to cover these as soon as possible. Thank you.

@AkashSharma-ij1ed 11 месяцев назад

@@PayosAcademy yes😅😂 thanks sir

@PayosAcademy 11 месяцев назад

In vent sizing are expecting PSV sizing? Please clarify so that we can start working on it

@AkashSharma-ij1ed 11 месяцев назад

@@PayosAcademy sir vent sizing

@PayosAcademy 11 месяцев назад

@@AkashSharma-ij1ed Ok. thank you

@vijayshankarpandey2063 8 месяцев назад

For highly flammable solvent like petroleum. We can store it above the ground and below the ground as well but you take additional safety measurements.

@PayosAcademy 8 месяцев назад

Great Vijay. Absolutely correct. Thanks for sharing your Answer. This will help other viewers to understand the concept. We will be happy to hear more from you. Enjoy learning. All the best 👍

@dcetian85 2 месяца назад

It was a wonderful lecture. I believe it will be even more beneficial if you also show the screenshots of standards

@PayosAcademy Месяц назад

Thank you for your valuable suggestion. Surely it will help but I was bit worried about copy right. I will check it and implement in our upcoming videos. Thank you. Stay tuned with us. Enjoy learning.

@soundaryakulkarni6229 10 месяцев назад

In nozzle sizing criteria foe vapor the value is 45000 or 4500, because written is 4500 but told 45000

@PayosAcademy 10 месяцев назад

We appreciate your technical skills Soundarya. Coming to your question it should be 4500 as per Appendix II of DEP 31.22.05.11 (Gas liquid separators - type selection and design rules). Thank you for highlighting this. We will be very happy to hear more from you in future. All the best. Enjoy learning 👍

@muhammadIrfan-my2dp 16 дней назад

understanding is excellent, but at the end, please share an Excel sheet for ease of calculation

@msvandana09 10 месяцев назад

Code is a set of rules generally accepted guidelines that are recommended for industry to follow. Standards are more elaborate way of how to follow a code. Codes tells you What to do, Standards tell you How to do it.

@PayosAcademy 10 месяцев назад

Absolutely correct. Your answer will surely help others to gain some extra knowledge. Thank you for sharing your view. We will be happy to hear more from you in future. Enjoy learning. All the best 👍

@abhinitkushwaha189 4 месяца назад

Sir , Jab aapne bola ki residence time NLL aue LLL ke bich or NLL or HLL ke bich lete hai toh, aapne question me residence time LLL and HLL ke bich consider kaise kr liya..mai confuse ho gya waha se . Please clarify. Time stamp 50:26

@FUbaidullahR 11 месяцев назад

Sir vessel kaa orientation horizontal or vertical kyaaa rakhiye sir

@PayosAcademy 11 месяцев назад

Good question dear. Try keep the orientation of vessel vertical if any special requirements like high volume, vapor pressure then only go for horizontal orientation.

@murarilal-ww6vc 9 месяцев назад

Sir please make a video reactor design and volume calculation

@udayrakate7751 7 месяцев назад

yes sir please make video on reactor sizeing

@Your_Manojesty 11 месяцев назад

After confirming all HHLL, LLLL then if we take margin , will it not affect my HHLL LLLL?

@PayosAcademy 11 месяцев назад

HHLL, LLLL will not change as you are keeping it directly 300 mm no matter whatever holdup volume, length diameter you increase but for HLL and LLL if your governing case is operator action time then you have to revisit these values as your parameters change Hope we understood your question correctly and given satisfactory answer If you need any further information get back to us. Thank you, All the best 👍

@Your_Manojesty 11 месяцев назад

So in short working volume and LLL HLL will increase if we round off the height of the tank?

@PayosAcademy 11 месяцев назад

Yes, your working volume and LLL, HLL will increase while round up. But once you roundup revisit LLL and HLL because that will be your dead volume if you get it into your working volume it will increase your holdup time Hope this will help you.

@Your_Manojesty 11 месяцев назад

@@PayosAcademyyes understood, thankyou sir

@PayosAcademy 11 месяцев назад

You are most welcome. All the best 👍

@pradnyagaikwad3607 18 дней назад

Sir HHLL and TTL seems to be matching .... Between HHLL and TTL there should be again 300 mm Gap? Then where should be Overflow nozzle ?

@Rajesh_981 9 месяцев назад

Truly knowledgeable 🎉❤

@PayosAcademy 9 месяцев назад

Thank you Rajesh. For more such informative content stay tuned with us. Enjoy learning. All the best 👍

@bhavinjagtap1239 9 месяцев назад

Excellent as always🎉

@PayosAcademy 8 месяцев назад

Thank you Bhavin for your appreciating words. We are happy that you find our content informative. We will definitely try to provide you the same in future too. Stay tuned with us. Enjoy learning 👍

@pranali6meshram707 3 месяца назад

I want inbreathing and out breathing calculation plz make a video

@avinashpatil8999 10 месяцев назад

Make video on PSV scenarios

@PayosAcademy 10 месяцев назад

Sure Avinash. Based on your request we are currently planning to post a video on p&id in this week. We will also make video on PSV but we need some time. Thanks for your understanding. Thank you.

@varundeep8419 3 месяца назад

very inormative

@PayosAcademy Месяц назад

Thank you so much.

@harshadashinde46 7 месяцев назад

In case of horizontal vessels , what is the criteria for designing of an overflow line? Is it same as vertical tank/vessel?

@kunal-eq3bl 5 месяцев назад

BTL to LL 0.74+0.2 hona chahiye na sir?

@Swp36 7 месяцев назад

Sir , Vertical and Horizontal Separtor sizing k bare mai bhi video banao sir

@AdityaTiwari-sd5yr Месяц назад

BTL to LL is wrong or not calculated properly. 0.74 + 0.15 is 0.89 not 1 m. I think 1 m you got is from 0.74 + 0.30

@vinayakkhambal1153 5 месяцев назад

Thank you 🎉

@avinashmokashe527 7 месяцев назад

Thank you.❤

@shubhambetal8224 10 месяцев назад

Hello sir, On what basis storage tank selection to be done?

@PayosAcademy 10 месяцев назад

Good question Shubham. Selection of storage tank depends on various factors such as capacity, chemical to be handled, holdup time requirement, etc. Hope we understood your question. If you want more details please feel free to get back to us. Thank you. Enjoy learning. All the best 👍

@udayrakate7751 7 месяцев назад

On the Edible oil packet volume in ltr -1 ltr and 0.9kg