Live Sound Rack MOD | Behringer S16 | Furman PL-PLUS DMC

Подписаться 3,3 тыс.

Просмотров 2,8 тыс.

50% 1

In this video I will be doing a quick modification to my Behringer at 16 just to make setting up at gigs a little bit more streamlined and eliminate something else I don't have to think about like plugin it in. Please let me know what you think about it in the comments below and don't forget to like, share, subscribe!
Buy the Gear Here:
Furman PL-Plus DMC Power Conditioner: amzn.to/3o3DEAm
SKB Roto Molded 3U Shallow Rack amzn.to/3B6zV9m
Behringer S16 Digital Stage Box: amzn.to/3nWBGBQ
Right Angle Plug: Right Angle Plug: amzn.to/3i3YlZ0
This channel is dedicated sharing the knowledge and experience I have gained in the DJ, live sound, and lighting industry but in the most practical yet detailed and fun way that I can. It is for entertainment purposes, and definitely not to offer you any legal advice. Any modifications or repairs to equipment I may do on any video is done at my personal comfort level and experience. I highly advise you to consult with your instruction manuals for any repairs needed for your equipment. Equipment firmware and software updates vary on how you must conduct them so please consult with the manufacturers before you do so. Not all equipment is comparable to certain upgrades and therefore could potentially brand are your equipment useless by doing so. Therefore I reiterate please consult with the manufacturers of your equipment and computers before you decide to do any upgrades based on what you see on RU-vid. On this channel you may see anything from how-tos, product reviews, gig logs and more. Not here to just give you a bunch of tech specs but actual ways to overall improve with your entertainment business I sure practical ways I actually use equipment or perform at events. Check out G Fire on:
Website: www.gfireproductions.com
Facebook: / gfireproduct…
Instagram: / gfireproduc…
Twitter: / gfirepro71
RU-vid: ru-vid.com/show-UCXIV…
The DJ industry has been impacted by the economic shut down of 2020. Many have went out of business, some are barely holding on, and then again there are those like G Fire Productions who are thriving through these times. With that thought, my overall goal is to help others in the industry build their brands and improve in business and finance through a channel l call "Your Favorite Thousandaire". This is absolutely free as I am sharing my journey and success with the world. Check out Your Favorite Thousandaire on:
RU-vid:www.youtube.com/watch?v=Shjxw…
Facebook: / yourfavorate…

Хобби

Опубликовано:

29 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@user0000user 4 месяца назад

7:17 you should use wire ferrules for flexible wires. In Germany you even HAVE to use them. I also think when working on electricity you should know what color correspond to what connector without testing for continuity.

@gfire_productions 4 месяца назад

Thank you my friend. Good advice and everything still works just fine.

@PotofGoldPodcast 2 года назад

congratulations on reaching 1k subscribers!

@gfire_productions 2 года назад

Thank you for your support and helping us to get there RaieleighDurham.

@EventStreamTeam 2 года назад

Dope!!!

@gfire_productions 2 года назад

Thank you Power Jams!

@ottobaer 2 года назад

Is there a reason you switched neutral and phase wires? Check at 8:00 In my opinion the leads should be secured by a core end sleve to be durable

@gfire_productions 2 года назад

Thanks for watching Otto and for your opinion sir.. After testing out other IEC cable connections from QSC, ADJ and some other brands I use, the way I connected and tested the cable in the video matched exactly from Edison end to IEC end. As for durability, this works great for me because it is intended to be more of a permenent plugged in position.

@doughammel3256 2 года назад

@@gfire_productions your neutral and hot leads are backwards.

@gfire_productions 2 года назад

Hello Otto Bear and thanks for watching. That is really a good question and I think I know where you're coming from so I will try to explain why I hooked this cable up in the way that I did in the video. If I were building a standard extension cord with a male to female Edison plug then I would've hooked the white wire to the silver screw the black wire to the gold screw and the green wire to the green screw. However, because I was building an IEC to Edison cable the white and the black leads needed to be switched. For this I connected the black wire to the silver screw, the white wire to the gold screw and the green wire to the green screw. The way I tested the connections in my video was verified with the same test of different IEC cables from; a QSC speaker IEC cable Chauvet freedom par hex 4 IEC cable, The original Behringer X 32 IEC cable. They all three have a continuity check per each lead, just like I did with the one that I built in the video. I hope this answers your question and it's not too confusing. Thanks again for your support Otto.

@gfire_productions 2 года назад

@@doughammel3256 thank you for watching and your input about the connections. After testing out other IEC to Edison cable connections from a QSC speaker, an ADJ par light and some other equipment I use, the way I connected and tested the cable in the video matched exactly from Edison end to IEC end of all the other cables. How ever to test another theory, the neutral and hot leads are hooked up different or as you might suggest on a standard Edison female to Edison male extension cord.

@Romer0franklin 6 месяцев назад

Hey bro, question can I use AES50 to USB to Mac without using an x32 or controller?

@gfire_productions 6 месяцев назад

Hello Romer. I don't think so but don know for sure. have no clue. Are you thinking about trying to us it as an interface???

@Romer0franklin 6 месяцев назад

Yes!! So I'm trying to record a live band session without breaking the bank

@carlosdiaz5486 6 месяцев назад

@@Romer0franklinNo. S/Dl16 and S/DL32 aren’t standalone units. You’d have to use a mixer with them. I’d suggest the Behringer XR18 or the Midas counterpart, the MR18. They’re small digital mixers with a USB B port to connect to and use as an audio interface! Hope this helps

@gfire_productions 6 месяцев назад

@@Romer0franklin after some research the answer is no the stage boxes can't be used as a standalone interface.Tthat USB port on the back of the stage boxes or for firmware updates. The Behringer XR18 however can be used as a standalone interface. amzn.to/3GQJzAP or maybe you want to consider an analog option with the Yamaha MG16 series mixers: amzn.to/3TyLiSU

@gfire_productions 6 месяцев назад

@@carlosdiaz5486 thanks for your input.