Live Testing the AtomX CAST Switcher for Atomos Ninja V

Подписаться 440 тыс.

Просмотров 53 тыс.

50% 1

Testing the new Atomos AtomX CAST switcher unit for the Ninja V & Ninja V+ live on stream.
🛒 Atomos AtomX CAST: geni.us/5T527
🛒 Gear I Use to Make Videos: bit.ly/3RlRmgx
🟣 Gerald Undone Merch: bit.ly/2ViBkcV
=============================
Table of Contents:
=============================
0:00 - Opening Chitchat
1:09 - Connecting Ninja V
2:17 - Camera Setup
3:54 - Stream & HDMI Outputs
7:19 - Recording
8:35 - Switching
11:20 - Picture-in-Picture
12:50 - Audio
14:42 - Value Question from Chat
17:38 - Audio Frame Delay
18:45 - WARNING: LOUD NOISES
19:26 - Overlays
23:10 - Static Caused by Frame Delay
24:42 - Enabling the CAST
25:06 - Monitoring Tools
26:19 - Multiview
28:00 - Future Potential
34:40 - Image Quality
36:12 - Stream Performance Specs
36:33 - Frame Rate
39:37 - Powering
42:30 - Giveaway (Over Now)
52:13 - Some Random Tips
=============================
Gear Used to Make This Video:
=============================
Camera: geni.us/1MQhzI
Lens: geni.us/LB7iE
Microphone: geni.us/I40Dn
Recorder: geni.us/ZLyb
Key Light: geni.us/AQto9
Complete Gear List: kit.co/GeraldUndone/youtube-v...
=============================
Best Deals for Camera Gear
=============================
Gear Focus Marketplace: geni.us/gearfocusGU
Amazon Top Deals: amzn.to/3d9tdT4
B&H Deal Zone: bhpho.to/2SCDrnj
=============================
Music:
=============================
I use Artlist for my background music needs. Use this link to get two extra months when signing up: bit.ly/2TV5sYT
=============================
Follow Me:
=============================
Twitter: / geraldundone
Instagram: / geraldundone
Discord: / discord
=============================
Patreon & PayPal:
=============================
If you wish to support the channel monetarily, you can use my Patreon page here: / geraldundone
Or directly via PayPal here: www.paypal.me/geraldundone
This is appreciated, but unnecessary, and no content will ever be behind a paywall.
=============================
Affiliate Links:
=============================
Some of the links in my video descriptions are affiliate links, which means at no extra cost to you, I will make a small commission if you click them and make a qualifying purchase. If you have a different purchase in mind, you can also use these storewide links below.
🛒 Amazon: geni.us/1m1G32
🛒 B&H Photo: bhpho.to/2MYRKBE
=============================
Recommended Channel Tools:
=============================
🚩 If you're a fellow RU-vidr, I highly recommend you try TubeBuddy. It's helped my channel immensely: www.tubebuddy.com/pricing?a=U...
=============================
#livestream #atomxcast #atomos

Наука

Опубликовано:

30 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 92

@jolyoncox 2 года назад

Congratulations on 300K, Gerald. Thank you for all your outstanding work.

@JohnJordache 2 года назад

Congrats on 300K subs Gerald. Hopefully one day I can get a phone call from you telling me you’re on your way to check on my studio setup 😅

@vi-dor 2 года назад

amazing LIVE test thank you very much!

@danielschaller-digitalcrealab 2 года назад

Very cool video as always and… congrats for the 300k 👏👏👏

@GarCorStudio 2 года назад

So sorry I missed the live stream…had the alert but got in late. Good stuff. I purchased it and really happy with this device. Keep up the good work.

@omgMBP 2 года назад

congrats on the 300k! You certainly have earned it!

@PromoMoviescomau Год назад

This is an awesome device. Thanks for showing the multi-cam set up Gerald.

@michaelpoczynek 2 года назад

This is a game-changer. They will sell a million of these. Thanks for making this video, Gerald.

@christovercomers 2 года назад

Watching from Kenya. You are quite informative on everything you do. Thanks

@MrAndyStenz 2 года назад

Bought this the other day before I saw your stream. Could see the value in it and potential for future firmware updates. Then I saw this stream and was super happy with my impulse buy (bravo to the Atomos email ad team for that 😂🤙🏻)

@OliverH93 2 года назад

Great video - quick question in regards to audio. Let’s say if you have an a7s3 with the XLR K3M - would you be able to output all 4 tracks of audio to the live stream - or is it restricted by HDMI capabilities to pass through audio. Audio was main reason I went with atem mini pro (I can chose which channels are active - and have multiple active at the same time from different sources - helps for live streaming with panels of 4+ people) So I’d be interested to know if the audio the ninja records/puts out to the live stream is limited to 2 tracks or can it be more?

@relihanmyburgh 2 года назад

How does the AtomX Cast handle LUTs ? More specifically, is there a single LUT for the stream/programme output, or is there a LUT per camera/input? Obviously having a LUT per input would be great for different cameras or gamuts+color spaces on each input

@rtoms 2 года назад

Congrats on 300k dude

@TomekNasternak 2 года назад

congrats 300K!

@JHambacker 2 года назад

Hey Gerald. I know this is older at this point, but I'm very curious about the application of a LUT to the incoming footage. As I understand this is not currently possible. My workaround has been to send the s-log footage to a camera mounted ninja V, apply the LUT there and then send the converted image to the X cast. It works... but it requires an extra Ninja for each cam. Not a cheap solution by any means.

@rauberdaniel 2 года назад

Hi, I'm Mark! :) Just kidding, congrats for the 300k! Incredibly impressive but well deserved. Don't mean to be one of those weird people sending you a back massage but you're definitely one of my favorite youtubers. Love the content and the overall visual style!

@dentaltv Год назад

Just a quick question: The PC is connected via HDMI and USB acting both as a source on the CAST and also via OBS as streaming source ????

@DanCarr 2 года назад

Do you have some sort of magic version of the Cast that downscales input resolution? They way you talked in the video made it sound like you could just plug anything in and it would work. But my experience with Sony cameras is that you have to set HDMI output either to Auto, or 1080p. If you leave it at 2160p you won't see anything on the input. The Atomos website also says "Any interlaced or progressive video source up to 1080i/p60 can be connected to the HDMI inputs ". It seems to handle FPS conversion well, but I don't think it actually converts resolution? Also wondering how the resolution of this RU-vid video is 1440p when the output resolution of the Cast is 1080p?

@lorenzodesiatiphotovideo 2 года назад

Hi, I would like to know if the audio signal comes out of the Hdmi output of the Ninja V. Without AtomX cast.

@SmartVideoBE 2 года назад

Can you record ISO recordings and program now? Is there an update for that? XML or something for premier?

@MarcoBiagioli Год назад

Hi Gerald! 1 question can you automatically switch in between cameras without the use of a laptop but just with the atomx?

@scpmediatn 2 года назад

For some reason my "switcher" menu doesn't have the right half that yours does, so I'm only able to cut between angles, and not fade. My firmware is up to date. Do you know if this was a beta firmware that you were using in this stream?

@tartvisual Год назад

May I know how you output your computer screen to the Cast? As I tried a few usbc to hdmi adopter but the Cast can't catch the computer screen signal. But those adopter works normal when I connect to ninja without the Cast.

@socc3r7k1ng Год назад

I already have the Ninja V, would you say go for the ATEM Mini or the AtomX Cast over this? I also considered the Ninja Connect but it’s limited to 2 inputs so I’ve taken it out of the equation. I’m leaning towards the ATEM because i feel it’s a bit more flexible but I could be wrong. This also requires me to use my Ninja when I could need my Ninja for something else at the same shoot.

@DroseMr Год назад

Is it the time to update this video or compare shogun connect or in conjunction . Thank You

@Dontlicktheballoons Год назад

Dude, I can't thank you enough for your time codes. You are my go to resource and just save me another job🎉❤❤❤

@remektekmedia6641 Год назад

I have both the CastX and ATEM Extreme ISO. Different animals. The CastX is ultracompact, perfect for my desk or a live demo, where I can show the different camera angles. The ATEM is more powerful, but larger and needs external monitor(s). It has multiple overlays and macros, and the Pro or Extreme can livestream without a computer. I see use cases for both, which is why I own both.

@mediazonestudios 2 года назад

I sold my Shogun 7 (has ISO recording with SDI inputs) for an Atem Pro ISO. They missed a big opportunity here, the SSD should be inserted into the Cast with ISO recording -- which I'm sure they'll add in the future.

@DaCarnival 2 года назад

Not sure the internal processing of the Ninja V can do that - isn't the Shogun 7 a much beefier computer on the inside?

@djw1091994 2 года назад

@@DaCarnival the Ninja V with Atom OS 10.71 is supposed to be able to record up to 5.9K ProRes RAW! 1080p ISO recording or even 2K ISO recording should be possible if it can accept up to a 5.9K input. Maybe even 4K ISO h.264 or h.265 since those bit rates are far lower then the astronomically high 5.9K ProRes RAW.

@sosuss 2 года назад

Can this be connected to a foot switcher? Lifestyle scenario: if a band member for example can switch from their pedal board to switch camera angles is it possible?

@brentwpowell 2 года назад

I've been trying to get the audio delay working, but it's greyed out. I see it working on your setup, could it be a limitation to the regular Ninja V?

@risbill1 Год назад

When I worked in TV news this would have been great. We had the atem mini in a mobile setup and it was loads of trouble.

@marvinlovenfeldt 9 месяцев назад

How would you connect the Røde rødecaster pro mk 1 to the AtomX for better sound?

@dmav2365 3 месяца назад

When you use multiple cameras, does Atomos Cast record one file or separate files?

@cap2redstudio 2 года назад

Thanks for the video!!!!

@cinematicknifeart9744 Год назад

is it only 1080p because of a 1.4 HDMI port or can it be altered by firmware for future updates?

@ironfistvail 2 года назад

do you feel safe with all them ninjas around you? i would

@JoATTech 2 года назад

If 2 outputs work at the same time it's much better then ATEM Mini (all 4 ports version). Cause you can have program and multiview both via dedicated HDMI. Bigger ATEMS got 2 HDMI outs AFAIR.

@likeris2 Год назад

How you activate record function? And can you record strait to laptop?

@keithbeckwith9253 2 года назад

Love your RU-vid channel, when you’re doing a live is your audio going directly into your computer via OBS? Or is there another means in which your ring in your audio into the live call?

@carlosbuitragoZ 10 месяцев назад

Hello, great Live video. Thank you! Question: Atomos X Cast can (now) record each input (ISO recording)?

@ImagineAS 2 года назад

Im going to go insane. My X Cast doesnt light up. I have tried everything install wise and cannot get it to do anything but be recognized as invalid. Anyone have any ideas?

@MaxKissler 2 года назад

That's a great format for a device like the AtomX CAST. Really enjoyed it.

@robertfeliciano5723 2 года назад

Recording four 4K30 ISO streams on the Ninja V+ would be amazing.

@raysanders332 2 года назад

Do you know if an SSD can be connected to a Z 6 II?

@marwanessa8635 Год назад

Hi .. Where did you get the curtains behind the camera?

@henrydennis1500 2 года назад

Awesome video thanks.

@skymakai Год назад

How do you have your sound blankets hanging?

@BrendanEvan Год назад

Just tried mine for the first time tonight. Somehow the color turns crazy at random. Largely desaturated overall but my skin tones are purple. Coincidence im here at Gerald’s video and he loves purple but no one wants to look THAT purple. Anyone know WTF is going on with my cast???

@aami6412 2 года назад

Well kind of complicated for me? I was buying it from B&H through your site but I am not understanding anything I am just lost. If you can point me to where can I read step by step on how to operate petit up ETC. THX

@dj26792 2 года назад

I realise I'm late to this party but if the firmware on your atem is up to date I'm pretty sure you can change the layout of the multiview in the atem software control app

@ItsCaputo 2 года назад

I love the idea of using this with my Ninja, but I wish it worked with the Shinobi as well.

@AskJoe 5 месяцев назад

For what it's worth, it's been 2 years since this came out and they dropped the price to just $150, so it's a great entry level switcher. I would love to see a 4K version at some point or at least a way to save the individual inputs like the ATEM ISO line.

@St.Olson_Photography 2 года назад

Live chat wouldn't let me comment a number 😩 lol maybe next time. Love the content and keep up the good work Gerald!

@matthewdavidking 2 года назад

I have some rather interesting questions as I've been using the Ninja V in combination with an ATEM Mini. • Does the AtomX Cast support custom LUT for live output; atm I'm using Ninja V on the FX3 for Slog3 to Rec709 conversion before sending to ATEM (we do lives outside; need the DR) • Does the AtomX Cast support any sort of audio adjustments, i.e. audio from a single HDMI feed or Multi, and is there dynamic compression for that feed like ATEM has in it's desktop app

@matthewdavidking 2 года назад

The lack of multi-cam out for the ATEM mini is a pain point, thus the AtomX is appealing, but having the custom LUT conversion has drastically bumped the quality of our lives (pun intended).

@JamesNobleMusic 2 года назад

This thing looks sick

@erichly 2 года назад

man I'm really interested in getting this since there is a December Ninja V+ and switcher bundle..but I wonder if my brain is really going to be able to manage this lol

@pweb4941 2 года назад

I would love to see your opinion on the Roland AeroCaster Livestreaming System

@dgzunexpectedlabel9592 2 года назад

Hey hey What ‘ you Think about ninja v+ ?? Any review ?

@mverick160 2 года назад

Do you also need a Ninja V for each camera your using? Or just the HDMI run direct from the A1/R5/Etc to the Cast?

@SixplusonemediaAu 2 года назад

All inputs run into the Cast. Single Ninja 5 needed as it is just the screen and input device for the Cast device.

@mverick160 2 года назад

@@SixplusonemediaAu Thanks. I was hoping not but I saw one on a camera in the background and that would mean 5 ninja V's. That would have killed it for me.

@djw1091994 2 года назад

Would love for it to support a Stream Deck and Companion. Macros would be awesome!

@kpopRC 2 года назад

the atem xtreme converts all 8 inputs.

@gardien340 2 года назад

it extended the life of my NinjaV :)

@brettsherman7810 2 года назад

I just got this. My biggest gripe is the Overlay. It is so unintuitive. It should go on all feeds. Also they added a crazy limit of 1 MB file size. Unfortunately for a full-frame slate a PNG that is 1920x1080 is 1.1 MB. I managed to get a full screen slate by dividing it in 2 and loading 2 separate images in the top and bottom. It is SUPER HACKY though. And why the hold down do to load and not the double-tap like you do switching sources? Just unintuitive to have separate procedures. You should also be able to fade in and out an overlay AND most importantly there needs to be a Program view mode so you can actually see the overlays without a separate monitor. I mean the whole point of this thing is that you don't have to carry around a new monitor. But it holds a lot of promise if they continue to improve it.

@iamnolting Год назад

I cant get the image to mirror my camera

@thatcherfreeman 2 года назад

I don't think I've seen anyone cover a video switching box while cutting the video with that switcher. You must have XXL brains to be able to present and live switch this stream the same time.

@edwardwhite4790 Год назад

Can you have your preset graphic be place on each camera you switch to. Say I’m shooting a panel discussion with 3 people. Switching to camera 2 can I have name/title of speaker 2 when switch to camera 2 appear for camera 2? So you are saying you can’t press record for each camera while the Cast with the Ninja5 is recording? Can you use a zoom F8N pro with the Cast/ Ninja5. Where you have a wireless lavaliere on your 3 subjects. If you wanted the follow audio feature.

@vertigo710 Год назад

Hi! Im seeing a small delay on the video compared to the voice. Have you noticed something? Im not live, maybe the recording? Thanks, Alejandro

@denialvanish Год назад

A follow-up on this would be great. Atomos doesn't seem to be able to make up their mind on gear lately. Great promise with the Cast, but no connectivity. Ditto the Connect, which has great connectivity but none of the features of the Cast (and you can't use both on one Ninja), and then a watered-down (and admittedly less expensive) Yolobox in the form of the Zato. You have the clout and contacts, Gerald, why not a full livestream and assessment on all of the above?

@tom_dillon 2 года назад

I am an owner of the A1. Do you see any reason yet to get the Ninja V+ over just the V?

@JonahLorsung 2 года назад

doesn’t the V+ support 8k and 4k 120? Whereas the V doesn’t?

@tom_dillon 2 года назад

@@JonahLorsung From what I keep reading is the Sony A1 does not support 8K output over HDMI yet.

@ericbaluya361 2 года назад

cool video.

@adriantxu 2 года назад

That reminded me of The Soprano's ending 😅

@hdstudiosdanaandrobinjenki3992 2 года назад

I BOUGHT THIS AND THE FIRMWARE HAD TO BE UPDATED BUT THE USB-C DOESNT WORK BOTH B&H AND ATOMOS SAYS IT NEEDS TO BE REPLACED OR REPAIRED BUT SINCE IM STILL WITH IN MY RETURN PERIOD IM GETTING RID OF THIS AND LOOKING ELSE WHERE.

@jackbisson9226 2 года назад

Gerald its time you get Undone on the Mavic 3.

@MartinCraneRockbeast 2 года назад

Use Atems for more inputs and green screen.

@innomind 2 года назад

If it had 4 SDI inputs, 4k ISO capture, it will be golden. Instant buy!

@rogeriogomesosorio4755 Год назад

The Yollobox is a better option, because it can live stream directly without the need of extra programs or computers

@sumitkolisetty 2 года назад

Plz review samson sr850 🥺🥺

@MaxWildlifePhotographer 10 месяцев назад

Never thought I’d run a live stream needing this. But recently, I had to and this video was immensely helpful. Running this livestream raised $4500 for a nonprofit I work with so this was great to have as a reference point to help me help them.