Loading A Tractor on a Trailer

Подписаться 29 тыс.

Просмотров 40 тыс.

50% 1

How to SAVE your truck and trailer from a ROLLOVER, proper and improper balancing of a load, fir tractors.
Kubota: ASSY VALVE, RELI Part # 7K502-63710
Tractor Parts
Grapple Bucket amzn.to/3bugiuC
Titan 5’ Box Blade amzn.to/3eCXj37
Rotary Cutter, 6’ amzn.to/3apQi1Z
Sheffield Plastic Field Boxes amzn.to/2LGKut0
SeaSense U-Bolts with Frame Straps amzn.to/32TjkVt
Land Pride Kevlar Replacement Belt amzn.to/33mpbTh
Oregon 91-456 Mower Blade, 25" amzn.to/2Yz8BRB
Filter Kit Kubota L2800 L3400 L3700SU HST amzn.to/2OTrnvT
Kubota Fuel Filter with O-Rings L2501 L2800 L3200 L3400 amzn.to/2we27dj
Kubota HH164-32430 Filter, Oil amzn.to/38rwICu
Kubota OEM Air Filter, TA040-93230 amzn.to/2SVEuhB
Kubota 1 Gallon SAE 15W-40 Engine Oil amzn.to/2ULF9Vj
Subscribe for new videos every week.
Follow us on Instagram
/ woodelldani. .
Subscribe for more DIY videos
/ dwoodell. .
Like us on Facebook
/ daniel.woode. .
Disclaimer:
Due to factors beyond the control of Daniel Woodell, I cannot guarantee against improper use or unauthorized modifications of this information. Daniel Woodell assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Daniel Woodell recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Daniel Woodell, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Daniel Woodell.

Хобби

Опубликовано:

26 авг 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@karlstuart2962 Год назад

I think if you got pulled over, the inspector would really frown on how you are transporting the bucket and the box grader. The only thing holding them is slight residual hydraulic pressure. Remember you relaxed it? If you had a hydraulic failure, that bucket is coming out of the grapple and through the car behind you. In my OPINION, it’s always best to chain down all the attachment. The way you did it seems like an accident waiting to happen. Also, since you don’t have factory lockout on the backhoe and FEL, the boom and FEL should be chained. JMO.

@G.I.JeffsWorkbench 6 месяцев назад

Great video for beginners and more experienced folks alike. Good job explaining what you were doing & why you were doing it. Glad you explained the concept of weight distribution and emphasized tongue weight. Very informative video. Thanks for taking the time to make and share it.

@mr.redneck2715 7 месяцев назад

Most states require four independent hooks to the tractor. That means four ratchet straps or four clamps.

@user-er3th6wv6y Год назад

Thanks for taking the time to make the video, and trying to help others do things safely. Unfortunately, what you did in the video is absolutely unsafe (probably illegal) for you and everyone else around you. You should use four separate chains, one on each corner of the load, 45 degrees from load to support is a good target. You used 3, if the one chain on the rear of the tractor breaks, or loosens (which can happen), the rear end is not secure at all. Also, the rear of the tractor can move side to side with one chain, even though you crossed the chain over the hoe. Four separate chains will not allow that to happen. The attachments are not tied down at all! You are counting on gravity and pressure relief valves to hold the hoe on the scraper and the grapple on the loader bucket. No Way! To properly secure that load, you need a minimum of six chains. A binder on each one is what I do. If you lose any part of that load and hurt or kill someone, you are done. Take what you do seriously and do it right. My brother was a DOT cop for 20 years and taught me the correct way. Anyone who watched/watches this, DO NOT DO THIS! Ask the State Police in your state to show you how to do this. Dan, I would stop doing this and get rid of the proof you ever did (delete this video). Sounds harsh I know, but a 400 pound loader bucket taking out a family going to Grandmas for apple pie is a lot worse.

@paulwiedeman4501 2 года назад

Great video, learned some good points and ideas when I have to load my tractor. Keep up the great videos!

@shockcomadeath3525 Год назад

Thank, I learnt heaps from your video!

@Gunshotglory Год назад

Every point has to be able to be tightened. DOT doesn’t play with load security. The WLL of the chains needs to be 50% of what you are securing. If it’s going over, it needs to be 100%. Working load limit.

@JavierPadron Год назад

Yuup!!

@kdiddy970 2 года назад

Pretty darn informative, thanks!

@SpeedyCotton55 Год назад

Great video, thank you sir.

@ramchillarege1658 Год назад

Very nice. Thank you.

@danielchambers1958 2 года назад

Very good video my friend…. Thank you for the info✅👍

@scottrivers6472 Год назад

Great video for a newbie thank you

@DanielWoodell Год назад

Glad it was helpful!

@brucebannerman6848 11 месяцев назад

Personally, it's four chains or more and some areas require crossed chains so I usually cross them. We have larger tractors (100 hp more or less),often will duels and wide attachments so require bigger trucks and trailors with signs and flags and sometimes escorts, lots of fun

@whatifikilledyou 2 года назад

Great video, but a tip for you. Always pull to lock your chain binder. If your hands slip you’ll be eating that cheater pipe and spitting out teeth. Ask me how I know…

@ajpsawmill4314 2 года назад

Nice tractor. I have a 3200 dt bh77. I sold my car trailer and got a 22' beaver tail equipment trailer. Loads really easy. If you have ktac insurance, you can add the trailer. Really cheap

@imaslowlerner Год назад

Nice video. I'm not sure but should the backhoe be secured as well?

@joetterolison1286 2 года назад

19'6" Thank You My trailer came with the Package deal from a local trailer manufacturer at 18 feet and the Kubota L-2501 and I bought the Woods BH-75 backhoe the following week I bought the removable stake pocket 'D' rings and was able to get the Hooks through them but some how one will not go back through to remove it from the 'D' ring. I will remove the hook from the chain and that issue is solved Question about possibly grinding some of the Hook for gaining clearance with the 'D' Rings do You think that it might make that hook degraded and dangerous?????? I really try to avoid modifying anything that is a safety device It is just long enough but the hinged ramps were making contact with the Brush Hog when it arrived and had already chipped the paint which was a minor point because I knew after I started using it there would be many more chips and scratches and dents Your Trailer looked like it was at least that long if not a 20 foot trailer, and was it NOT hooked to You Tow Vehicle. I assume it was connected It was not visible in the video and the trailer jacks the the rear did not seem to touch the ground as You loaded I will look again at that step Thanks for Your fast response Ken in Florida

@RandomStuff-zt6qf 26 дней назад

What size trailer is that?

@scottmeister431 2 года назад

What is the gross weight of your trailer. I'm looking to buy one for my Kubota L3901. Looking at 10K. Thanks

@vikingrobot4179 11 месяцев назад

When I load things I’m always thinking of this thing tips over I was the tractor to stay attached to this trailer. This means will my chains hold strong if this trailer tips or rolls? Those chains look like they need to be three times as thick with a chain binder at all four corners and possible two More mod section then secure the implements down with high tensile ratchet straps. Spend the extra money on heavy chain and binders. It’s like do you want your wife to drive a 1965 dodge with no seatbelts or do you want her to have seat belts, air bags, curtain , side door and steering wheel. Although 65 Dodges are cool, I’d add a harness, cage and a Hemi.

@Sam-pw8zh Год назад

What size trailer is it?

@jtaylor9355 Год назад

Why did you list a relief valve in the description?

@jonfournier2338 11 месяцев назад

This task can be accomplished with 2-20 ft chains 4 binders and two 2-in straps. Binder on each corner strap on each implement.

@DanielWoodell 11 месяцев назад

The amazing thing about RU-vid is when I show how I do things there are a lot of people they provide me with a very good justification for doing a differently.

@joetterolison1286 2 года назад

I have been wondering if anyone loads a Kubota with a Backhoe backed onto the trailer How long is Your trailer Deck? I see You still have a clearance issue where You use the bucket to raise the rear/lower the trailer tail so Backhoe frame does not rub or drag on the trailer Reaching back to work the backhoe levers is probably not a good option for Me and My lower back issues I have not tried backing onto the trailer yet, but when I drive onto it the bottom of the Backhoe plows a deep gouge in the dirt/sand 18 foot with Beaver tail and 4 foot ramps and longer ramps might have to be at least 10 to 12 feet long Thank You for this video Ken in Florida

@DanielWoodell 2 года назад

The deck is 19’6” it refuted to as a 20’.

@joetterolison1286 2 года назад

@@DanielWoodell Thank You You have Great video's and even show things that happen in real life and You ask for feedback when You have questions Great videos Ken in Florida