Тёмный

Long Metric Thread on a Manual Lathe. ( How To ?? ) 

WELD MACHINE
Подписаться 916
Просмотров 1,3 тыс.
50% 1

How To ?? Cut most Threads on a Manual Lathe.
Back with a similar part as the previous video. But, this time using 1020 grade Mild Steel.
A little more forgiving of a material for Cutting Threads, unfortunately not as nice a material to work with such as Stainless Steel or Medium to High Tensile Steels.
IF you have any questions, let me know in the comments 👍

Опубликовано:

 

19 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 8   
@DCT_Aaron_Engineering
@DCT_Aaron_Engineering 22 дня назад
That's pretty good results Peter. Especially the measurement over that length. Thanks for sharing. Aaron.
@weldmachine
@weldmachine 22 дня назад
Hey Aaron. I was actually a little surprised by the amount minimal taper in the bar from Tailstock to Chuck. Not that it really matters too much with Threads. But' it's good to know the Lathe is running fairly straight. Thanks for taking the time to watch 👍
@chriswoods2263
@chriswoods2263 22 дня назад
Another interesting video
@weldmachine
@weldmachine 22 дня назад
Hey, thanks, Chris 👍
@graedonmunro1793
@graedonmunro1793 25 дней назад
nice long thread!!
@weldmachine
@weldmachine 25 дней назад
Yes, it's a fairly decent size 👍
@tates11
@tates11 День назад
Make the part from threaded rod. Save your client a fortune.
@weldmachine
@weldmachine День назад
The part could possibly be made with All Thread. But the customer wanted a Shaft size of 25.00 mm with a M22 Thread. I always offer a customer alternatives for what they might need. But this is what the customer wanted. I did offer to machine a 25.00 mm Shaft with a Thread that could except the M22 Thread into it. But, the part that was required needed to 1 piece 👍
Далее
Another Thread Cutting Video?!
27:45
Просмотров 3,2 млн
Lathe Chuck Accuracy - Fix your 3 Jaw Chuck
19:14
Просмотров 47 тыс.
19 Amazing Metal Work Processes You Must See ▶7
15:02
I Finally Bought A New Lathe - Hafco Al 250G
25:20
Просмотров 344 тыс.
Auto-Retract Threader, The Next Generation
2:59
Просмотров 24 тыс.
Let's face it, no one does this on the lathe.
38:51
Просмотров 109 тыс.
How to use a U DRILL on a Manual Lathe ??
20:55
Просмотров 1,2 тыс.